Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹23.6 L
EMD Value
₹24,000
Closing Date
7 Jan 2022, 3:00 pmClosed
Panchayat President
Panchayat Office, Soorakudi
Construction of Panchayat office Building at Soorakudi in T.Soorakudi Panchayat
2021_RDTN_217850_1
DIPR/1/skti/rgsa/skudi/ptoff
Open Tender
Civil Works - Buildings
Item Rate
180 days
Soorakudi Panchayat
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹24,000
11 Jan 2022
30 Dec 2021
7 Jan 2022
30 Dec 2021
7 Jan 2022
30 Dec 2021
Amount
Construction of Panchayat office Building @ Soorakudi in T.Soorakudi Panchayat
Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B
Cement mortar 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum
Collection and supply of Sand and filling into the basement including cost and conveyance to the site and all labour charges for filling as per standard specification.
Collection and supply of gravel for filling from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x23/4" and conveyance of all materials to site and all labour charges etc complete
CENTERING BELOW GL: Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floocomplying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete.
CENTERING Above GL: Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floocomplying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete.
Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (above Basement)
Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works
scratch proof ceromic tiles of size 305x305x6mm cost and conveyance of all materials to site and all labour charges etc complete
Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum
Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick
weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum
Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc
Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification
Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Labour charges for fixing doors along with frames in position etc complete
Labour charges for fixing windows and ventilators along with frames in position etc complete
European water closet with all fittings and 10 lit capacity flushing tank
Supplying and Fixing in position of best quality make White glazed wash basin of size 550x 400mm - 1 No.
Fabrication and supply of Mild Steel Door of any required size with double leaf,outter frame of 35x35x5mm equal MSL angle and shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2Nos. horizontal and 3Nos. diagonal for each shutter using M S flat Of size 20x 5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding 6Nos,of hold fasts, 2Nos. wind appliances, 3Nos. tower bolts,1No.aldrop 2Nos.Handles fixing shutter with 6 Nos.of hinges with outter frame of the door including painting the whole unit with one coat best guality of red oxide primer.
Door D
Door D1
Door D2
Fabrication and supply of Mild Steel Window of any required size with Three leaf,outter frame of 35x35x5mm equal MSL angle, mullion section made of 35x35x5mm equal T-section and shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 1No. horizontal for each shutter using M S flat Of size 20x 5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding. Protective grill with 12mm square M S rods at an intervel of not greater than 10 cm centre to centre to the outter frame 2 NOs of peg stays with hole for keeping the windows open in different positions, 2 Nos.of locking handles fixing the shutters with 4Nos. of hingss hold fasts, 6Nos of hinges with outter frame of the door including painting the whole unit with one coat best guality of red oxide primer.
Window w
Window w1
Supplying and fixing fine polished cuddapah slab of Cost of 20 / 30mm thick cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
PVC Storage tank including all charges etc complete
Supplying and fixing P.V.C rainwater down fall pipe of 110m dia with necessary shoes, bends,& clamps etc.,
Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)
Wiring with 2x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall an ceiling PVC accessories in flush with wall with 3mm thick hylum shet cover with TW switch box and 5 A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / fan point (for electronic regulator) (5 points per coil) (SD 25)
Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU. conductor of 1100 v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x 100x113 mm TW switch box for 5 A3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point (SD 36)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8") copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thick an either side with paining with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125)
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD 110)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube(SD 89)
Supply and fixing of WT bulk head fitting with guard (philips/ Bajaj/ crompton/ K.Lite) suitable for 11W CFL lamp with CFL (SD 83)
Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only (SD 144)
pressed Tiles with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm
Fabrication of Supply of Steel grill gate using structural steel in all aspects as directed
Supply and fixing of Steel rolling shutters including cost and conveyance to work site and labour charges etc complete
Supplying laying and jointing PVC pipe above Ground level (External) - 15 mm dia
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
KR CHANDRAN
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .