Repair and Maint of Street light fittings and Solar lights and Misc work at Zone II under GE Army Jaisalmer

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or soft/dis integrated rock for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches in soft/disintegrated rocks not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable and erection of poles a all as specified and directed at site.

Taking out serviceable/unserviceable electric cable of any size any type from excavated trenches/on pole/on wall etc .

Taking out serviceable/unserviceable stone patti from excavated trenches.Note for item No 3:-Serviceable cable and stone patti kept in safe custody for re-use at site and serviceability shall be ascertained by Engineer-in-Charge.

Relaying the electric cable of any size in the excavated trench/on pole/on wall etc,retrived from ser item No.

Relaying the stone patti of in the excavated trench retrived from ser item No 4.

M & L for XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross sectional area size 10 Sqmm x 4 Core complete all as specified. Make :- Havells, Polycab or equivelant .

M & L for XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross sectional area size 16 Sqmm x 4 Core complete all as specified and directed by Engineer-in-Charge. (Make :- Havells, Polycab or equivelant) .

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified & directed by Engineer-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-Charge.(Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-Charge.

Taking down old unserviceable existing street light fitting of any type (FTL/HPSV/LED or any other type from the pole/buildings, at any height and repairing the same including renewal of defective parts such as chokes, starter, bipin holder, base plate, tube rod etc all as required at site and refixing the same after the repair and making the light fittings functional complete all as directed by Engineer-in charge complete.Note :- All the spares will be measured and paid under respective items.

Taking down existing High Mast light fitting complete light with bracket ring along with their control gear with the help of winch at repairable height and taking up at its original height after repair and renewal of unserviceable material all as specified and directed by Engineer-in-Charge. Note : (i) Item/materials required i.e.ballast, igniter, bipin holder, lamp, chock, etc required for measured and paid separately under relevant items under supply only. (ii) Fixing of lamps/tube rod not included in unit rates.

Taking out serviceable/Unserviceable Lamp Holder of any watt/any size etc .

S& F in repair for lamp holder inner thread type for HPSV/HPMV fitting 150/250/400 watts complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

S& F in repair for lamp holder inner thread type for HPSV/HPMV fitting 70 watts complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable bipin holder of any size etc.

S& F in repair for bipin holder suitable for security light fitting 4x14, 4x24 Watt complete all as specified & directed by Engineer-in-Charge.

Taking out serviceable/Unserviceable super imposed igniter any size etc.

S& F in repair for super imposed 3 lead igniter suitable for SON/MH lamp 70-400 Watts complete all as specified & directed by Engineer-in-Charge.(Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable HPSV lamp 70 Watt of any size.

S& F in repair for HPSV/Metal Halide(MH) lamp 70 Watt complete all as specified & directed by Engineer-in-Charge. (Make : Crompton, Havells, Philips).

Taking out serviceable/Unserviceable HPSV lamp 150 Watt of any size.

S& F in repair for HPSV/Metal Halide (MH) lamp 150 Watt complete all as specified & directed by Engineer-in-Charge. (Make : Crompton, Havells, Philips).

Taking out serviceable/unserviceable HPSV lamp 250 Watt of any size.

S& F in repair for HPSV/Metal Halide (MH) lamp 250 Watt complete all as specified & directed by Engineer-in-Charge. (Make : Crompton, Havells, Philips).

Taking out serviceable/unserviceable HPSV lamp 400 Watt of any size.

S& F in repair for HPSV/Metal Halide (MH) lamp 400 Watt complete all as specified & directed by Engineer-in-Charge. (Make : Crompton, Havells, Philips).

Taking out serviceable/unserviceable fluorecent tube rod 36 watt etc .

S& F in repair for fluorescent tube rod 36/40/28 watt complete all as specified & directed by Engineer-in-Charge.

Taking out serviceable/unserviceable tube rod T-5, 14 Watt etc .

S& F in repair for tube rod T5, 14 watt, single rod suitable for security light fitting 4x14 watt complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable tube rod T-5, 4x24Watt etc .

S& F in repair for tube rod T5, 24 watt, single rod suitable for security light fitting 4x24 watt complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable ballast 250 Watt etc.

S& F in repair for ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) lamp 250 watt complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable ballast 150 Watt etc.

S& F in repair for ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) lamp 150 watt complete all as specified & directed by Engineer-in-Charge.(Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable ballast 70 Watt etc.

S& F in repair for ballast copper, 230/240 volts, 50 HZ AC suitable for HPSV/Metal Halide(MH) lamp 70 watt complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

Taking out serviceable/unserviceable electronic ballast 2x14 watt etc .

S& F in repair for electronic ballast, T-5, 2x14 watt, 240 volts suitable for security light 4x14 watts complete all as specified and directed by Engineer-in-Charge.(Make :-Crompton, Havells, Philips).

Taking out serviceable/unserviceable electronic ballast 2x24 watt etc .

S& F in repair for electronic ballast, T-5, 2x24 watt, 240 voltssuitable for security light 4x24 watts complete all as specified and directed by Engineer-in-Charge. (Make :-(Make :-Crompton, Havells, Philips).

Taking out serviceable/unserviceable electronic ballast 1x36/40/28 watt etc .

S& F in repair for electronic ballast 240 volts, 50 Hz, AC suitable for 1x36/40/28 watt tube light fitting (fluorescent) complete all as specified & directed by Engineer-in-Charge. (Make :-Crompton, Havells, Philips).

Taking out serviceable/Unserviceable Control box for street light of any size complte all as Specified and directed by Engineer-in-Charge.

S&F in repair, control box for street light made of PVC box including MCB 10Amps - 01 No and terminal 3 Nos for single phase and neutral on porcelain based insulator with locking arrangement fixed to pole with MS clamps of suitable (20mmx3mm) with nuts, bolts & washer including painting of MS clamp complete all as specified & directed by Engineer-in-Charge. (Make : Sintex, National).

Taking out serviceable/Unserviceable Cable 2.5 Sqmm, Two Core all as psecified and directed by Engineer-in-Charge.

S&F in repair, cable 2.5 sqmm Two core, aluminium multistrand, PVC insulated, unsheathed, 1100 volts grade complete all as specified and directed by Engineer-in-charge. (Make : Finolux, Havells, Polycab).

Taking out serviceable/Unserviceable MCB of any size etc.

S&F in repair, MCB single pole 10 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-Charge. (Make : Havells, Legrand, L&T).

Taking out serviceable/Unserviceable electric Timer Switch any type all as specified and directed by Engineer-in-Charge.

S& F in repair timer switch panel suitable for 40Amp 3 Pole with astronomical timer switch complete with fiing arrangement complete with enclosure and required swithch gear/MCB/fuses complete all as specified and directed by Engineer-in-Charge. (Make : Indo asian, L&T, Legrand).

Taking out serviceable/Unserviceable LED street light of any type/any watt all as specified and directed.

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and peanut lense for batwing light distruction with integral electronic constant current driver, PF ≥0.95 and system efficiency ≥ 100 and CRI≤ 70 suitable for 30 Wattage complete all as specified and directed by Engineer-in-Charge. (Make : Orient, Havells, Crompton).

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and peanut lense for batwing light distruction with integral electronic constant current driver, PF ≥ 0.95 and system efficiency ≥ 100 and CRI≤70 suitable for 45 Wattage complete all as specified and directed by Engineer-in-Charge. (Make : Orient, Havells, Crompton).

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and peanut lense for batwing light distruction with integral electronic constant current driver, PF ≥0.95 and system efficiency ≥100 and CRI≤70 suitable for 65 Wattage complete all as specified and directed by Engineer-in-Charge. (Make : Orient, Havells, Crompton).

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and peanut lense for batwing light distruction with integral electronic constant current driver, PF ≥0.95 and system efficiency ≥ 100 and CRI≤ 70 suitable for 72 Wattage complete all as specified and directed by Engineer-in-Charge. (Make : Orient, Havells, Crompton).

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and peanut lense for batwing light distruction with integral electronic constant current driver, PF ≥0.95 and system efficiency ≥ 100 and CRI≤ 70 suitable for 90 Wattage complete all as specified and directed by Engineer-in-Charge. (Make : Orient, Havells, Crompton).

Demolition the existing broken/ D-shaped PCC and M&L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate for damaged coping, encasing around of pole including necessary form work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Taking out serviceable/Unserviceable of galvanised iron bracket of any size of any type all as specified & directed by Engineer-in-Charge.

S&F in repair, galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings all as directed by Engineer-in-Charge.

Taking out serviceable/Unserviceable of MCCB any type/any make all as specified & directed by Engineer-in-charge.

S&F in repair MCCB, 63 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:- Havells, Legrand,L&T, ABB).

Taking out serviceable/Unserviceable GI Pipe light grade of dia 40 mm from excavated trenches/on pole/on wall etc .

S&laying GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed by Engineer-in-Charge.

Taking out serviceable/Unserviceable GI Pipe light grade of dia 25 mm from excavated trenches/on pole/on wall etc .

S&laying in repair for GI pipe light grade of dia 25 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed Specified and directed by Engineer-in-Charge.

M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of stay assembly including necessary form work all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts including necessary form work complete all as specified & directed by Engineer-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping/plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Taking out unserviceable/rusted LT Pole of any size all as spcified and directed.

Supply, transportation fixing and errection of Steel Tubular Swaged poles complete with cast iron base plate, finial taper pulg, bolts, nuts and screws as specified type 410 SP-31 (9.0 meters long) and including making alternate white and black strips 30cm height (Total 05 Nos) with two coats of synthetic enamel paint over a coat primer complete all as specified and directed by Engineer-in-Charge.

S& F in repair for the following parts for LED fittings:- Make:- Crompton,Philips,Havells

(a) Driver 30 W Make-Crompton,Havells,Philips

(b) Driver 45/48 W Make- Crompton,Havells,Philips

(c) Driver 72 W Make-Crompton,Havells,Philips

(d) Driver 90 W Make- Crompton,Havells,Philips

Dismantling and taking out old unserviceable existing Contactor any size and any size and Supply & Fixing New Contactor 40 Amp,3 Pole 415 Volt 50 HZ with AC coil 415Volt complete all as specified and directed by Engineer-in-Charge. (Make :- Havells, L&T , Legrand).

S&F in repair PV module 40 watt suitable for LED light of 9 watt complete all as specified and directed by Engineer-in-Charge.

S&F in repair battery 12 V, 40 AH heavy duty suitable for solar lighting system complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED light 9 watt for solar light complete all as specified and directed by Engineer-in-Charge.

Supply and pouring the distilled water to solar light batteries in different location, servicing the existing lights under juridiction of GE (Army) Jaisalmer in & including minor parts replacement, check the wiring, replacement of wire, etc and cleaning the PVC module 40 watt with water, after watering clean the PVC module with soft cloth in every 3 month complete all as specified and directed by Engineer-in-Charge.

S R ENTERPRISES

SANJOLI CONSTRUCTION COMPANY

Leelashah Enterprises

M/s Shree Construction Company

JAI ENGINEERING COMPANY

M/S PRASHANT BENIWAL

M/S RAKESH CHOUDHARY