REPAIR REPLACEMENT TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN MISC WORKS IN ZONE B OF AGE BR I AREA UNDER GE MIS MHOW

Amount

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for brick work with modular size burnt clay bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

All as per Sl item No:2, but except bricks complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, pillasters, cornices etc (upto G+3 storied building) scrapping down , brooming down or steel wire brushing, and washing with water after completion of precoat treatment applying two coats of Anti fungal Weather coat paint (xxterior emulsion) white or tinted over a coat of primer (X2) complete all as specified and directed. Note :- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat. application of second coat will be got passed from Engr-in-Charge/GE. (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M& L in repair for preparation of surface for application of water based epoxy resin coating of waterproofing for internal wall dampness and filling of cracks and making the surface smooth and finish complete all as specified and directed. Note : (a) Complete removal of treatment/plaster(where needed) on internal walls and preparation of surface for application and making the surface wet .(b) apply first coat of Dr. fixit Dampguard in ratio(1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs.(c) apply second coat of Dr. fixit dampguard in ratio(1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or equivalent.

Dismantling floor or wall tiles including cement mortar bedding and rubbish off the premises complete all as specified and directed

M & L for Glazed ceramic tiles of size (300mm x 200mm) x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry in cement screed over & including rendering 10mm thick in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles (450mm x 300 mm) size 6 to 7mm thick in dados or skirting over & including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed.

M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exc 0.11 Sqm, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exc 0.18 Sqm, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M & L for vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tile n exc 0.36 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM (1:6) or with chemical cement to match complete all as specified and directed.

All as per item No 16 above but in skirting over & including 10mm thick screed in CM (1:4) complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

All as per item no - 19 but as in skirting over 10mm thick rendering in CM (1:4 ) complete all as specified and directed.

M & L for chequered cement concrete tiles (40cm x 40cm) x 25 to 30mm thick (Glosy finished) with grey cement and pigment, including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors and cut & polished complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed. (Note: Sand cushioning over will be measured & paid seperately.

M & L for machine pressed precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed. (Note: Sand cushioning over will be measured & paid seperately.

M & L for 50mm thick Stone dust filling under floors including watering and consolidation complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete, sunken floors complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M & L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, 40mm thick as in floor, coping, finish the surfaces even and smooth with using extra cement complete as specified and directed.

M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

M & L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM (1:3) and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

M & L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in levelling course having avg thickness 50 mm finished even and fair for laying floor finishes etc complete all as specified and directed.

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete all as specified and directed.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.)complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size (580mm x 440mm) white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair of wash hand basins, vitreous china,of size (550x400)mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S & F in repairs of padestal pattern Vitreous china wash down water closet pan white including trap,PVC seat cover white, connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe etc complete all as specified and directed.

S&F in repairs of vitreous china urinal half stall type (350x390x600) mm (minimum) height with including providing & fixing of plugs bedding against wall in cement mortar (1:2) pointing around urinal back in cement mortar complete all as specified and directed.

S&F in repairs of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair of Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S & F in repair of 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repair of CP fancy type angle valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs of CP Brass Fancy type shower rose 15mm dia with 125mm long CP Nipple of approved quality complete all as specified and directed.

S & F in repairs of Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed. Make : Plumber / Jaguar.

S & F in repair of flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as complete all as specified and directed.

S & F in repair of LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified and directed.

S&F in repair of stainles steel gratings round type 150mm size of (Min Weight 100 gms) complete all as specified and directed.

S&Fin repair of PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs, complete all as specified and directed.

S & F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair of rotational moulded polythylene 500 Ltr capacity water storage tank ( in double layer)(cylindrical/vertical with close top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

S & F in repair of rotational moulded polythylene water storage tanks( in double layer), 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

S & F in repair of rotational moulded polythylene water storage tanks( in double layer), 2000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 25mm bore complete all as specified and directed.

Taking up or down steel tubing 15mm bore & connections complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections complete all as specified and directed.

S & F of GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S & F of GI tubing 20mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S&F in repair of gun metal gate valves 15 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

Taking down door shutter with frame n exc 1.5 Sqm each without taking of shutter from the frame complete all as specified and directed.

S&F for PVC door frames of sizes (50 x 47) mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F of Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 Sqm and not exceeding 2.0 Sqm complete all as specified and directed.

S & F of 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats complete all as specified and directed.

S & F of second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S & F of flush shutters, solid core connection with block board core and plywood face panels, commercial type on both sides 25mm thick complete all as specified and directed.

S&F of Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair of Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

S & F of figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed by Engineer - in - Charge .

M & L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan incl hacking out complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed.

S & F of Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F in repair of Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.

S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-410 Gde E-250 Quality A, complete all as specified and directed.

S&F in repair of factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified and directed.

S&F in repair of steel ventilator fixed type with glazing bar complete all as specified and as directed

S & F of 100mm long stainless steel butt hinges complete all as specified and as directed.

S & F of 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F of 150 mm long Aluminium anodizes barrel tower bolts of extruded sectioncomplete all as specified and directed.

S&F of 150 mm size aluminium anodized handle complete all as specified and directed.

S & F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified and as directed

S & F in repairs of aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

S&F in repair of 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F in repair of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F in repair of Drapory rod 25mm dia aluminium alloy powder coated fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw complete all as specified and directed.

S&F of PVC ( SWR) bends any radius bore of 110 mm complete all as specified and directed.

S&F PVC ( SWR) bends any radius bore of 75 mmcomplete all as specified and directed.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 Ltrs capacity complete all as specified and directed.

S&F in repair of PVC tank Cover for OHT of 500 Ltr Tank capacity complete all as specified and directed.

S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S&F in repair of CI Nahani traps 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B1 complete all as specified & directed.

S&F in repair of 18/19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame work inculding 6 mm thick teak wood lipping edging on all sides complete all as specified and directed.

M&L for welding not exceeding 2.5 cm in length to the metal not exceeding 6mm thick complete all as specified and as directed.

S & F in repair of PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size (550 x 450)mm complete, Model No 555 of PRAYAG or equivalent as approved complete all as specified and directed.

S & F in repair of plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and evenly applying one coat of white wash on surfaces of walls etc complete all as specified and as directed.

All as per item No. 101 above but one coat of white wash on ceiling complete all as specified and as directed.

M & L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and evenly applying two coat of cement based paint complete all as specified and as directed.

M & L for washing rubbing down and stopping distempered surfaces of walls etc and evenly applying one coat of distemper oil emulsion distemper all as specified and directed

M & L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10CM width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and directed

M & L for preparation of old painted steel and iron based surfaces of any description, not otherwise described over 10CM width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and directed

M & L for preparation of surfaces of bldg No plate / tab of any size and apply one coat of synthetic enamel paint and writing letters or figures (Block, Roamn, Italic or Indian) of not less than 50 mm height and not less than15mm width incl, stops, commas, lines etc complete all as specified and directed.

M & L for complete removal of old decorated plastered surfaces of wall,pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a coat of primer (X2) complete all as specified and directed Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item. complete all as specified and directed.

Taking down and re-fixing of Old Aluminium door shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips complete all as specified and directed. NOTE: (Glass pan and wire guage will be measured and paid separately area exc 2.00 Sqm but n Exc 4.00 Sqm each)

Taking down and re-fixing of Old Aluminium window shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips NOTE: (Glass pan and wire guage will be measured and paid separately area n. exc 2.00 Sqm each)

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.

M & L for Providing and fixing of 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work complete all as specified and directed.

S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S & F of Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat (40 x 3) mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M & L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in (600 mm x 600mm) grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

Taking down shutters Shutters of any description n exc 1 sq. m each complete all as specified and directed.

M & L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M & L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Chitragupta Construction

M/s Himgiri construction

M/S Sunshine Construction

NIDHI CONSTRUCTION

Jamna Constructions