SPL REPAIR TO OR MD ACCN BLOCK NO SP-10/1-6 (06 DUS) OF 50(I) PARA BDE SIG COY AT WAC LINE UNDER GE(W) AGRA

Amount

Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Disposal of removed/demolished soil/materials exc 1.50 km but n. exc 5 km and depositing where directed complete all as specified and directed by Engineer-in-Charge.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with CM 1:3 or PCC 1:2:4 type B0 complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete type B-1, 1:2:4 mix ( 20 mm graded agg) in padding, roof kerbs or mud stops, rounded or chamfered on edges and similar work incl necessary formworkall as specified and directed by Engineer-in-Charge.

Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching, coping , roof kerbs, mud stop etc and similar work including all necessary form work complete as specified and directed by Engineer-in-Charge.

M & L three coat of Roof waterproofing solutions smartcare damp proof ultra an innovative fiber reinforced elastomeric liquid which provide the ultimate waterproofing cover of 2.32sqm/Liter with 10 years of waterproofing warranty and upto 12 degrees celsius of surface temperature reduction complete all as specified and directed by Engr-In-Charge.

PCC 1:3:6 C-1 (using 20 mm graded crushed stone aggregate) as in providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismicand other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks for fixing hold fasts, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as specified and directed by Engineer-in-Charge.

M&L Machine cut kota stone 20-25 mm thick as in floor, stair case, landing etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing over 20mm thick screed bed in CM ( 1:6) as in floor complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth/path finished even and fair all as specified and directed by Engineer-in-Charge.

Providing and Laying 80 mm thick factory made chamfered edge cement concrete paver block of M -30 grade with approved colour , design & Pattern as in footpath , parks, lawns , Drive ways or light traffic parking etc, of required strength , thickness & size / shape , made by table vibratory method using PU mould , laid in required colour & pattern over and includig 50mm thick compacted bed of coarse sand , compacting and proper embedding / Laying of inter locking paver blocks into the sand bedding layer through vibratory , compaction by using plate vibrator , filling the joints with fine sand and cuttig of paver block as per required size and paettern , finishibg and sweeping extra sand complete all as specified and directed by Engr-in- charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface 350 x 250 x 7 mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including taking down cement plaster and 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed by Engineer-in-Charge.

M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors, skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed by Engineer-in-Charge.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 marble chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble chippings, all design and pattern approved by Engr-In-Charge complete all (Payment for providing grooves shall be made separately) as specified and directed by Engineer-in-Charge.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ manufacturers instructions finished fair complete all as specified and directed by Engineer-in-Charge. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

M&L for applying three coats of white wash on wall including preparation of new plastered surfaces of walls, complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new plastered surfaces, complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement base paint on wall over a coat of priming paint including preparation of new plastered surfaces,complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper over a coat of average 1mm thick Birla putty on new plastered surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

All as per item No. 26 above but one coat of white wash on ceiling as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of wall and applying one coat of cement base paint (snowcem) white or tinted complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment old plastered or unplastered surfaces including preparation surfaces of walls and applying two coat of distemper oil emulsion on wall over a coat of 1mm thick wall care putty all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered surfaces and applying one coat of weather proof in different tint as in band/strips in narrow width and similer works complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof grade fe-410-0 & fe 310-0 complete all as specified and directed by Engineer-in-Charge.

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connection complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc. brick walls complete all as specified and directed by Engineer-in-Charge.

S&F CP Bib taps fancy type 15 mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as pecified and directed.

S&F CP Bib taps fancy type long body 15 mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore CP angle/Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm concealed stop cock, chromium plated fancy type with long shank and cup complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP Swivel shower fixing with 15mm pipe including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) all as specified and directed by Engineer-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore, CP fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed by Engineer-in-Charge.

S&F Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed by Engineer-in-Charge.

S&F 32 mm dia PVC waste pipe for wash basin /sinks 800mm long complete all as specified and directed by Engineer-in-Charge. Make Prayag Cat No 327

S&F in repairs 32 mm dia PVC waste pipe for wash basin /sinks 800mm long complete all as specified and directed by Engineer-in-Charge. Make Prayag Cat No 327

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall/laid in trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 10mm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and directed by Engineer-in-Charge.

Chamfer, splays or arris in facework of granite, marble etc all as specified and directed by Engineer-in-Charge.

S&F in repairs kitchen sink made of stainless steel 1mm thick with plugs, washers and wasts pipe including bedding in cement mortar on to dwarf wall or including supply & fix cast iron cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair plate rack of 1mm thick stainless steel of size 900x600mm with three shelves complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge.

Eco-4000 Series windows fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws all as specified and directed by Engineer-in-Charge.

Eco-4000 Series Ventilator fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws all as specified and directed by Engineer-in-Charge.

S & F Mild steel work in framed work such as grills, gratings, guard bars etc, with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

M&L resecuring or easing & adjusting without taking down shutters of size exc 1.00 sqm and n exc 2.00 sqm complete all as specified and directed by Engineer-in-Charge.

Rolled sections as in framing for cladding, door chowkats, glazing and the like fixed with angle cleats and connecting plates, etc. complete allas specified and directed by Engineer-in-Charge.

M&L 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedcomplete all as specified and directed by Engineer-in-Charge.

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick 2nd class hard wood (Hollock/Sal/Bijasal), glazed skeleton door shutters open rebated and prepare to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as specified in clause No. 8B.3 at Sl page No. 145 and shown in drawing on sl page No 160 of SSR 2010 respectively and all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all aas specified and directed by Engineer-in-Charge.

S&F in repair 18 mm thick Rajshree Celuka ply of grade 1 quality of one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters complete as per specification and as directed by Engineer-in-Charge.

S&F magnetic catcher as in cup boards and drawers all as specified and directed by Engineer-in-Charge.

S&F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed by Engineer-in-Charge.

S&F 50mm dia, polished, hard wood knobs fixed with screws all as specified and directed by Engineer-in-Charge.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed by Engineer-in-Charge.

S & F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed by Engineer-in-Charge.

S & F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F in repair18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, one side pre-laminated and other side plain white colour fixed with screws to timber frame work in cup board partitions, shelves, kitchen cabinet/drawer shutters and similar work complete all as specified and directed.

S&F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F repairs150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or prevously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials to MES stores for segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge.

M & L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and included PVC Conduit terminated in 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for fixing of switches, sockets, fan regulators for one light point or one fan point controlled by one switch including making good to dismantled surfaces with existing finishes all as specified and as directed.

All as per item No 94 above, but one light point controlled by teo nos two 2 way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 94 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 94 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 94 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified and as directed by the Engineer-in-Charge.

One bell/buzzer pointcontrolled by one push button on the same board withother switches or independent with cables1.5 sq.mm size

Supply and fixing socket outlet multipurpose 2 pin and 3 pin, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge

Supply and fix in repair Bell, Ding Dong AC. 230 volts,single pole complete all as specified and as directed by Engr-in-charge

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED Bulb holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fix LED Bulb 15 watt suitable for Holder all as directed at site

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection inclding 01 No GI pipe medium grade ISI mark of size 32mm dia length not less than 1.5 mtr bending to shape with fixing arrangments nuts,bolts and clamp as required to wall as specified and directed

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and as directed by Engr-in-charge.(For Geyser)

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes :- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes :- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Supply and fix in replacement MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .

Supply and fix in replacement MCCB 4 pole 100 to 125 Amp Icu 16 Kilo Amp and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release suitable for fixing in DB.

Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 200 amps rated bus bar 240 volts complete all as specified and directed.

Supply & fix in replacement MCB SPN, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Supply & fix in replacement MCB SP, 5 TO 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

M & L earthing complete in replacement with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Taking down old Fan any type and deposite to E/M Store yard and Supply and fixing ceiling fans complete with blades, down rod and remote control suitable for BLDC Fan and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Taking down old Fan any type and deposite to E/M Store yard and Supply & fix exhaust fans AC single phase 230/ 240 V of size 380 mm sweep with louver including cutting hole plastering etc for fixing exhaust fan (For Kitchen)

Taking down old Fan any type and deposite to E/M Store yard and Supply & fix PVC Body exhaust fans AC single phase 230/ 240 V of size 250 mm sweep with louver including cutting hole plastering etc for fixing exhaust fan (For Toilet)

Supply and fix electric water heater, storage type inner body copper with fiber flash coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, Fastners,Hot and cold connection 450 mm long ,thermostate ,2 nos stop valve for incoming and outgoing water and one no chromium plated bib tap including all water supply from tank to geyser with 15mm GI pipe connection to geyser for hot supply all as directed at site by Engr-in-Charge. etc. Note : All water supply connections are underground and making good disturbed surface by plastering and two coat of paint all as directed at site

Supply and fixing 1.0sqmm copper FRLS wire for invertor in exising conduit complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of cable/ stay assy/LT poles and getting out in hard/dense soil complete all as specified and directed.

Returning filling incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil.

Removing excavated material not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point.

Sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.

Supply and fixing in replacement tube medium grade galvanized with all fitting and fixed complete to walls/ poles/ ceiling or laid in floor of size 40 mm bore for the protection of UG cables including dismantling/ taking out old, unserviceable one complete all as specified and as directed.

Taking Down UNSV Cable and Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 25 Sqmm 3.5 core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge.

SHRI RADHAYSHYAM JHA (BID ID -3367871)

scjha&sons (BID ID -3368486)

M/S SHRINATH CONTRACTION (BID ID -3368519)

ASHISH SHARMA (BID ID -3367883)

VAKRATUNDA CONSTRUCTION CO (BID ID -3366753)

Attar Singh and Sons (BID ID -3368482)

M/S SHARADA ASOCIATE (BID ID -3368896)