Providing repairs and maintenance to Old A/15 Quarters on the OU campus

Dismantling of Rough Shahabad Stone flooring on sand bed including labour charges for removing and stacking material with a lead of 100mts as directed by Engineer-incharge etc., complete for finished item of work.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling including all labour charges , etc., complete Terrazo flooring / Glazed tiles / Ceramic tiles

Dismantling loose damaged plaster from walls / ceiling etc., are raking out joints 20mm deep from terrace roof & raking out joints from 50mm to 100 deep, clean removal of debris with 100 lead as directed by Engineer-incharge including all labour charges etc., complete for finished item of work.

Dismantling doors, Windows & clear storey windows, ventilators etc., (wood or Steel) shutters including chowkhats, architraves, holdfasts and other attachments etc., complete & stacking them within 100 mt lead as directed by Engineer-incharge

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B in Ordinary Soil - Mechanical Means For PIpe LInes, Sumps, Septic tank etc.,

Plain Cement Concrete (1:5:10) (Cement: Fine Aggregate (unscreen sand) : Coarse Aggregate (Metal) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work GF

Flooring with Soluble Salt Porcelain Vitrified Tiles Screen Printed tile of 1st quality and make as approved by Engineer-in-charge of size not less than 600 mm x 600 mm ( Khajaria / Somani / Jhonson), 8mm to 10mm thickness with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge and Providing and fixing flooring with full depth jointing and pointing to the Vitrified / Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout / synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles. on all materials, cost of Epoxy emulsion grout and all labour charges for mixing laying tiles to required slope as directed by the Engineer- in-charge etc., etc., complete for finished item of work GF.

Providing skirting to internal walls to 12.5 CM height with Nano polished / stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge (Khajaria / Somani / Jhonson), length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work GF.

Flooring with Non-skid full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of for finished item of work GF.

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) prop, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge GF.

Labour charges for wrought and put-up including fixing in position for Teak wood Flush type door shutter including frame etc., complete for finished item of work

Supply and fixing doors as per drawings with WPC door frame of section 100mm x65mm of Aerofit make ISI of 28/30 mm thick single shutter WPC (wood polymer composite)shutter, comprisity of 70% virgin polymore 15% wood powder (fiber) and the remainging 15 additives comprising of virgin PVC Polymner of K value 58 to 60 calsium carbonate and naturals fibres and non toxic adhesive of KAKA Make the door shutters and frame shall be water resistant, fire resistant and termite resistant with tesile strengh not less than 170kg sq/cm and the door shutters and frame surface finished delo paint etc., including supply and fixing 6 no's, MS Z hold fast-150mm long of 40x40x5mm, 3 no's stain less steel, butt hinges 125mm long, and required full body threaded star screws 1 no alluminium aldrop 250mm long , 2no's alluminium tower bolts 200mm long, 2 no's alluminium handles 150mm long, including cost and convayance all materials to site, labour charges for fixing the frame in position, fixtures , fixing the shutter to the frame etc., complete for finished item of work for all floors.

Flooring with Rough Shahabad Stone Slabs of 25mm thick 0.60m x 0.60m or any other size as specified, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar (1:3) duly filling joints nearly, joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, labour charges for dressing of flooring stones etc., complete for finished item of work, including etc., complete for finished item of work GF.

Carting the debries with a lead of 10KM by mechanical Means including loading & unloading and all incidental and operational charges, labour charges etc., compete for finished item of work.

Painting to New walls with 2 coats Acrylic based Oil Bound washable Distemper ( Asian / Berger / Nerolac / Saicoat / Indocem ) over a base coat of water based cement primer of interior Grade -1 (Asian / Berger / Nerolac / Saicoat / Indocem) as approved by Engineer-In-Charge, MAKING 3 COATS in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges and etc., complete for finished item of work as per for internal walls.

Supplying and fixing 580mm x 440mm long Orissa Pan White Glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, 10 litres capacity Single Flush PVC Low Level Cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, CP long bend, 15mm PVC connection with brass union nut CP coated, 31.75mm brass plumber union, Brass body CP finish Bib Tap of not less than 300 grams weight with quarter turn spindle, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges, etc., complete for finished item of work.

Supply and fixing 4" (101.6 mm ) multi floor nahany trap with Jali- UPVC/SWR Pipe fittings etc., complete for finished item of work.

Supply & Fixing of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931 etc., complete for finished item of work.