SPECIAL REPAIR TO OTM ACCN BLDG NO P-260 OF KUMAON AT 4TH INF LINE MORAR CANTT UNDER GE GWALIOR

Amount

Demolition of reinforced cement concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed

M&L for reinforced cement concrete type B1, 1:2:4 in beams, cantilevers, bressummers, lintelsect etc complete all as specified and directed

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on the ‘other’ side of lathing in cement mortar 1:6 over brick/concrete surfaces complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces in ceiling complete all as specified and directed.

M&L for applying two coats of distemper, oil emulsion white or tinted over and including a layer of birla/ JK wall putty @ 1.20 Kg /Sqm including preparation of wall surface complete all as specified and as directed.

M&L for applying two coats of cement base paint over a coat of primer including preparation of newly plastered surface of walls complete all as specified and as directed.

M&L for applying two coats of cement base paint including preparation of old plastered surface of walls complete all as specified and as directed.

M&L for preparing of newly plastered surface of ceiling and including cornices plastered or unplastered surfaces and applying three coat of white wash complete all as specified and directed.

M&L for preparing of old decorated surface of ceiling and including washing, rubbing down and stopping of distampered and painted surfaces and applying two coat of white wash complete all as specified and directed.

M&L preparing of old decorated plastered or unplastered surfaces of wall including washing, rubbing down and stopping of distempered surface and for applying two coat of distemper oil emulsion paint white or tinted complete all as specified and as directed.

M&L applying 3mm thick wall care putty on walls to achive even and fair surfaces complete all as specified and as directed.

M&L for prepartion of old or new plastered surfaces of walls ,chajjas and applying one coats of weather proof water based emulsion paint (Acrylic paint exterior grade ) complete all as specified and directed.

M&L for preparing surfaces of old decorated wood or wood based materials and applying one coat of synthetic enamel paint on surfaces not otherwise described over 10 cm width or girth complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise escribed over 10 cm in width or girth including preparation of old surfaces complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F mild steel roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (FE-410 W(Gde E-250) including distance pieces, cleats, flat iron etc complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified directed .

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down of shutters of any description not exc 1 sqm each complete all as specified and as directed.

Refixing of shutters in same opening of any description including taking down of shutters any description not exc 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed.

Refixing of shutters in same opening of any description exc 1 sqm but n exc 2 sqm each including taking down shutter complete all as specified and directed.

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L for factory made 30 mm 2nd class hard wood, plain framed panelled shutters ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face IS 1003 (Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

M&L for 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed.

S&F Box type steel windows with side hung shutters (double shutters for glass and gauze) jointed together with and including grills using 12mm square bars @ 10cm C/C as per TD No CEBZ/TD /14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed. Note:- Glass/gauge shall be measured and paid separately under respective item complete all as specified and as directed.

S&F Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and directed by Engineer in charge. Note: Glass/guage shall be measured and paid separately under respective item.

M & L for anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

M & L for powder coated (minimum thickness of powder coating 50 micron) aluminium sliding or openable door ect with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws, lock etc complete all as specified and as directed. Note : Panel filling ie. glass, fiber sheet, board, wire mesh etc. shall be measured and paid for separately.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window (three track/two track) with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc powder coated aluminum snap beading, screws etc complete all as specified and directed. Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc shall be measured and paid for separately.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window (three track/two track) with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc powder coated aluminum snap beading, screws etc. complete all as specified and directed. Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc shall be measured and paid for separately.

S&F in repairs door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, glazed with putty or fixed with beads complete all as specified and directed.

Supply & Fixed 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F galvanized mild steel wire cloth, with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed

M&L for prepapraion of surfaces of any description and applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface exc 10 cm width or girth complete all as specified and as directed.

M&L for preparing new wooden surface exc 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified anddirected.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for 18 to 19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified and directed.

S&F 75 mm Hasp and staple, mild steel, wire type, including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium handles, cast type anodised of Size 125mm complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section of Size 150mm complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F in repair 75 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F in repair 125 mm aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repair 75 mm aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over and incl screed bed or bedding layer of 15 mm thick of cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic colour tiles,7 to 8 mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but n exc. 0.18 sqm , in dado skirting etc over and including rendering 10 mm thick in cement mortar 1:4 on other side of lathing and pointed in colour cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps etc over and including 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for 25mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and as directed all as specified and as directed

M&L for cement concrete type D2, 1:4:8 (using 40mm graded aggregate) in foundations, filling and mass concrete etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' Bricks, straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' Bricks, straight or curved on plan exc 6 mtr mean radius (but except brick) built in cement mortar 1:6 complete all as specified and directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 as in plinth protection incl finishing the surface even and smooth w/o using extra cement complete all as specified and directed.

Cutting out cracks to V section in existing walls, roffing or trace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for fixing and postion precast RCC bond of size 300 mm X 230 mm X75 mm thick complete all as specified and directed.

Removing existing water proofing treatment (Brick tile terracing)/ any type membrane, roughning of concrete surfaces, cleaning of concrete surfaces with water and removing debries/rubbish off materials out side of Ministry of defence (MOD) land complete all as specified complete all as specifeid and directed.

M&L for providing two coats of tap creat mixed in proportional ratio 1:1 one part of chemical, one part of cement slurry including curing surfaces complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1: 4 on concrete surfaces mixed with WPC @ 3% by weight of cement, surface finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for water proofing treatment to roof slab with APP modified membrane weight not less than 3.00 Kg/Sqm and thickness of membrane not less than 3 mm reinforcement with polyster non woven polyster mat (wt not less than 160 gm/sqm) water absorption of not more than 1% on mass within 24 hrs and water tightness/impermeability at 2 Kg/sq cm on primed surface with torch application method as per manufacture instruction, complete all as specified and directed with following descriptions : - (a) Applying evenly a coat of bitumen primer confirming to IS 3384-1965 @ 0.30 kg/sqm (b) Laying of APP modified membrane with 100 mm over lap in longitudinal direction and 100 mm in transverse direction (c) Thermal insulation with mineral / gravel finish of upper side of membrane uniformly embedded during manufacturing process.

S & F in repairs grating doom 100mm dia of PTMT with (minimum weight 25gms to Nahani traps etc complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement to 75mm dia outlet pipe complete all as specified and directed

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed

Dismantalling water tank and removing to store of 500 Ltr capcity complete all as specified and directed

M &L for rotational moulded polyethylene triple layer water storage tanks of 500 Ltrs Capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Dismantalling water tank and removing to store of 1000 Ltr capcity complete all as specified and directed

M &L for rotational moulded polyethylene triple layer water storage tanks of 1000 Ltrs Capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and directed.

M&L for Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm bore complete all as specified and directed

M&L for Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 20 mm bore complete all as specified and directed

Refixing old steel tubing and connections with new fittings in new or old positions (walls, ceiling, floor etc) of 15mm bore complete all as specified and as directed.

Refixing old steel tubing and connections with new fittings in new or old positions (walls, ceiling, floor etc) of 20 mm bore complete all as specified and as directed.

S&F in repair cutain rod of Stainless steel 25mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, stops, rollers etc. fixed on walls with screws with PVC rawl plugs ect complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of 450 mm length in repairs complete all as specified and as directed.

Dismantling and breaking up PVC/AC rain water / vent / waste / drain pipes any dia including fittings complete all as specified and as directed.

S&F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floor etc. complete all as specified and as directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floor etc. complete all as specified and as directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal complete all as specified and as directed.

S&F, 75 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F, 110 mm bore, PVC (SWR) junction single (single T), equal or unequal complete all as specified and as directed.

S&F, 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S& F ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or for brass ferrule of 20mm bore complete all as specified and as directed.

S&F in repair bib taps fency type, 15 mm bore, caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F Stop valves fency type, chromium plated 15 mm , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

M&L for providing precast cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match complete all as specified and directed .

S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580mm x 440mm, white colour with integral foot rests water closet (exluding flushing cistern and flush pipe) including lime concrete bedding complete all as specified and directed.

S&F in repair of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor complete all specified and directed.

S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550 x 400mm complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size complete all as specified and directed.

S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S &F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap for cold & hot water complete all as specified and directed.

S&F in replacement of 1st quality vitreous China white urinal flat back (half stall pattern) with and incl CP waste coupling of suitable size, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as directed.

S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F PVC cabinet with shelve 450x600mm including mirror fixed to wall with brass cleat with shutter complete all as specified and as directed by Engr-in-Charge.

S&F in repair 1st quality wash down water closet (Pedestal pattern) and tap, including connection to drain and flushing pipe and seat cover closed pattern with flat bottam, and cover and mild steel cromium plated or hinging device etc complete all as specified and directed.

S&F in repair 15mm bore strainless steel health faucet with stainless steel tube and holder etc complete all as speicified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 60cm long and 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Chromium plated shower rose 125 mm dia in repairs complete all as specified and directed by Engr-in-Charge.

M&L 12mm thick prelaminated particle board exterier grade with both side decorative choice lamination complete all as specified and directed by Engr-in-Charge.

Dismantiling of stone slabs and tiles of any discription or any thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.

M&L kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement and pigment over and including 10 mm thick rendering in cement mortar 1:6 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed

S&F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and exc 1.5m deep and not exc 3.0 m deep for foundation etc or for shafts, wells cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and as directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Demolition of and breaking up drain pipes (salt glazed ware, AC or reinforce concrete) 200 mm dia set in cement mortor complete all as specified and directed.

M&L for 200 mm bore salt glazed stone ware drain pipe Grade 'A' laid in trenches and jointed complete all as specified and directed.

M& L for cement concrete 1:4:8 type D-2, bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 200 mm dia pipes complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed all as specified and as directed.

M&L 75mm thick cement concrete type D-2, 1:4:8, (using 40 mm graded aggregate) as in sub base for floor etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade in grey cement and pigment glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed. Note : Sand cushioning shall be measured and paid under seperate item.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors in cement slurry in floors with grey cement and pigments over and including 15mm thick screed bed in CM 1:6 complete all as specifed and directed

M&L for cement concrete type B0, 1:2:4 (using 12.50mm graded aggregate) in lintels upto 1.5m clear span, cills, steps seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed.

Taking down carefully existing aluminium/copper point wiring (light, fan,socket or power point) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting,ceiling fan etc to be measured seperately) removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and directed.

Taking down main switches/MCB DBs of any capacity/type including MCBs complete all as specified and directed.

Taking down and servicing/greasing/painting of ceiling fan/ exhaust fan of any size and refixing in position including provision 3 core flexible PVC insulated multi stranded copper conductor of size 0.5 Sqmm from ceiling rose/ connector to fan with replacement of capacitor complete all as specified and directed.

M&L for point wiring with 1.5 sqmm (Nominal Area) PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of medium grade not less than 20 mm dia with all fitings and accessories including factory made MS/ pressed flush steel terminal boxes suitable for modular fittings with zinc coated duly concealed in wall reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified and directed. Make of wire : Finolex / Plaza / Polycab. Make of conduit : Anchor / Modi / Presfit.

Light/fan point controlled by one switch.

5 pin socket out let 5 amps on same board.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 151 here in before but point wiring with 2.5 sqmm FRLS multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 1.5 sqmm FRLS PVC insulated multi strand copper conductor cable as continous earth wire. Make of wire : Finolex / Plaza / Polycab. Make of conduit : Anchor / Modi / Presfit.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F modular white cover plate with frame of 8/12 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F modular white cover plate with frame of 06 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F modular white cover plate with frame of 04 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F modular white cover plate with frame of 03 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S&F Modular switch 1 way 06 amp single pole complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F modular switch socket combination 16A, 6 Pin of 3 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S & F of modular fan step regulator 120 W-2 module complete all as specified and directed. Make : Anchor / Roma / Cona / Legrand.

S&F angular lamp holder, PVC / Polycarbonate type with back plate suitable for angular fittings including LED Bulb 12W / 14W complete all as specified and directed.

S&F of Wall or recess Mounted Box type Batten with suitable LED tube rod of 1200mm, 18W/20W LED. The LED tube of design ensures uniform lighting. LED Tube suitable to operate in input voltage range of 110V to 265V (nominal rated voltage – 240V) complete all as specified and directed. Make : Wipro/Havells/Philips.

S&F of 20W of LED security Light fixture with IP66 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC complete all as specified and directed. Make : Wipro/Philips/Havells.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. Make of wire : Finolex / Plaza / Polycab. Make of conduit : Anchor / Modi / Presfit.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. Make : Legrand/Siemens/Scheider.

S&F sheet metal enclosure MCB DB, double door, 4 way TPN, 415 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete all as specified and directed. Make : Legrand/Siemens/Scheider.

S&F for MCB TPN 40 to 63 Amp, 415 Volts complete all as specified and directed. Make : Legrand / Siemens / Scheider.

S&F for MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. Make : Legrand/Siemens/Scheider.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. Make : Legrand/Siemens/Scheider.

S&F sheet metal earth plug, socket, single pole and neutral with single pole MCB 20. Amps 240 volts in repairs complete all as specified and directed. Make : Legrand/Siemens/Scheider.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core complete all as specified and directed. Make of cable : Finolex / Polycab / Gloster.

M&L for high density polyethylene pipes (HDPE) 50mm dia of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

M.S. ENGINEERS

M/S YOGANSH CONSTRUCTION CO.

mahamaya constructions

M/s Subhash Construction Co.

M/s Shri Diwakar Singh

GURU KIRTH BUILDERS

M/s Kohli Builders