Loading
Loading…
Loading…
Tender Value
₹35.5 Cr
EMD Value
₹71.0 L
Closing Date
15 Oct 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
17 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnoverof V/N or 'V' whichever is less; where V= Advertised value of the tenderin crores of Rupees N= Number of years prescribed for completion ofwork for which bids have been invited. The average annual contractualturnover shall be calculated as an average of "total contractualpayments" in the previous three financial years, as per the auditedbalance sheet. However, incase balance sheet of the previous year is yetto be prepared/ audited, the audited balance sheet of the fourth previousyear shall be considered for calculating average annual contractualturnover. The tenderers shall submit requisite information as perAnnexure-B of Chapter-6 along with copies of Audited Balance Sheetsduly certified by the Chartered Accountant/Certificate from CharteredAccountant duly supported by Audited Balance Sheet. Otherwise theoffer will be SUMMARILY REJECTED.
Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formul detailed as Annexure-G & G1 of Chapter-6. Compliance of Eligibility criteria by the Tenderer regarding Bid Capacity for the tenders having advertised value more than Rs. 10 Crore. 1.Name and style of the Tenderer with address (present tenderer) 2.The available bid capacity calculated is as under: Available Bid Capacity = [A x N x 2] 0.33 x N x B Where A = Rs.(i.e. Maximum value of construction works executed and payment received in any one financial year during the current and last three financial years immediately preceding the current financial year, up to date of opening of tender, taking into account the completed as well as works in progress.) N =Years (i.e. Number of years prescribed for completion of work for which bids hasbeen invited.) B = Rs.(i.e. Existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started up to the date of inviting of tender) Bid Capacity = Rs. 3.Details of the Chartered Accountant verifying the Bid Capacity. (i)Name: - (ii)Address: - (iii)Phone No: - (iv)Fax No: - (v)e-mail ID: 4.Declaration by the tenderer: I hereby declare that the information given above are true. If any ofthe information given above is found to be wrong at any time, my tender will liable to be rejected.
Note:- (a)The Tenderer(s) shall furnish the details of - (i)Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of invitingtender) for calculating A, and (ii)Existing commitments and balance amount of ongoing works with tenderer as per the prescribedproforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started up to the date of invitingof tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant. (b)In case if a bidder is JV, the tenderer(s) must furnish the details of (i)Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) by each member of JV for calculating A, and (ii)Existing commitments and balance amount of ongoing works with each member of JV either in individual capacity or as a member of other JV as per the prescribed proforma of Railway for statement of all works in progressand also the works which are awarded to each member of JV either in individual capacity or as a member of other JV but yet not started up to the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant. (c)Value of a completed work/work in progress/work awarded but yet not startedfor a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above-mentioned bid capacity in the tender under consideration. (d)The arithmetic sum of individual "bid capacity" of all the members shall be taken as JV's "bid capacity". (e)The available bid capacity of tenderer shall be assessed based on the details submitted bythe tenderer as per Annexure-B & Annexure-G1, Chapter-6 of Tender Document which should be duly signed by tenderer(s) and verified by Chartered Accountant. In case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria/tenderrequirement. For Maximum value of construction works executed and payment received in any one financial year i.e. Value-"A" considered for calculation of available Bid capacity shall be duly certified by CA supported with audited balance sheet and in case balance sheet is yet to be prepared /audited than it shall be supported by Form-16A issued by client (duly certified by CA) and/or payment received under relevantsection for contractual payment of Form-26AS generated through TRACES of Income Tax Department (duly certified by CA). Value of "A" not supported by duly certified audited balance sheet/Form-16A/Form- 26AS by Chartered Accountant will not be considered for Bid capacity calculation. (f)In case, the tenderer/s failed to submit the above statements along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of works during last 07 (seven) years, ending last day of month previous to the one in whichtender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similarworks each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of composite works (e.g. works involving more than one distinct component,such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of works during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not lessthan the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1) Separate completed works of minimum required values shall also be considered for fulfillmentof technical eligibility criteria for different components. (b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulatedin tender documents for evaluation of technical eligibility, shall be considered. Thescope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause-7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause-7 of the Standard General Conditions of Contract or jointly i.e., partly himself andremaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer forconsidering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The sub contractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending lastday of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the sameshall be done with subcontractor(s) fulfilling the requirements
as per clause-7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listedcompany having average annual turnover of Rs. 500 crore and above in last 03 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporation/registered at least 05 years prior to the date of closing oftender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of workorder, bill of quantities, bill wise details of payment received duly certified byChartered Accountant. TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
SIMILAR NATURE OF WORK :- Any OFC or OFC and Quad or Quad cable telecom work involving trenching, laying, jointing of such cable
51 conditions · 12 needing a document upload
If Bid Security is submitted through mode of Bank Guarantee, then tenderer must submit the scanned copy of the Bank Guarantee ( as per Specimen Format at Annexure - Q of Chapter- 6 Tender Document) submitted towards Bid Security and the original bank guarantee shall be submitted/ delivered inpersonto the official/ Office mentioned under item no. 16 of Top sheet-1 (as per para - 3 of Instruction to Tenderers (ITT) of Chapter - 2 of tender Document ) before closing date of submission of bids (i.e. excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e- tendering portal (IREPS) and / or non submission of original Bank Guarantee within above specified period shall lead toSUMMARILY REJECTION OF BID .In case of the Bid Security deposited through e- payment gateway, then the same should be confirmed by the tenderer.
Tenderer shall submit certificate as per Annexure - A & A-1 (as required) of Chapter - 6 of the Tender document. However , if the bidder on behalf of tenderer including its constituents confirms and certify the provisions of Annexure -A on IREPS , the uploading of physical signed Annexure - A on IREPS portal is not mandatory. Further, Partnership firm / Joint Venture (JV) / HinduUndivided Family(HUF) / Limited Liability Partnership (LLP) etc. shall also submit a certificate as per Annexure - A1. Non submission of the certificate A & A1 , or submission of certificate either not properly filled in , or in a format other than the prescribed format shall lead to SUMMARILY REJECTION of the offer.
Tenderer shall submit details of works successfully completed or substantially completed during last 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F & F-1 (as applicable) of Chapter 6 of the Tender Document along with work completion/experience certificate. Non - compliance with this condition shall lead to SUMMARILY REJECTION of the offer.
Tenderer shall submit the details of the constitution of Firm i.e. Proprietary Firm / Partnership Firm / HUF / JV/ Company Registered under Companies Act- 2013/ Limited Liability Partnership/ Registered Society & Registered Trust etc. as PerAnnexure - C of Chapter- 6 of the Tender Document. Tenderer shall also submit the mandatory supporting document such as copies of Partnership Deed, Power of Attorney, Memorandum of Articles, Articles of Association, Authorization, Certificate of Incorporation, Certificate of Registration, Deed of Formation ,MOU of JV , Copy of PAN card etc. as stipulated under Para 14,15,17 & 18 of Chapter - 2 of Tender Document. Important Note:- (a) In case one or more of the members of JV is / are partnership firm (S) Proprietary Firm HUF/ Companies/ LLP Firm(s) /Society (S) /Trust(s), the required documents of eachindividual member of JV shall be submitted along with the documents to be submitted on behalf of the JV, (b) non submission of above documents (except PAN Card) or submission of incomplete documents shall lead to UMMARILY REJECTION of the offer.
Tenderer shall submit Power of Attorney, duly notarized/Authorization in favour of a single individual as per Para - 14,15,17 & 18 of the tender form (second sheet) of SGCC and Para 15 of Chapter - 2 of Tender Document. Non - submissionof Power of Attorney, duly notarized/ authorization asSUMMARILY REJECTION of the offer/Bid.
Tenderer participating as Joint Venture (JV) firm shall submit MOU for Joint Venture (JV) participation as per Annexure - L of Chapter - 6 of the Tender Document along with other mandatory document of constituent members as stipulated. Non submission of above documents or submission of incomplete documents shall lead to SUMMARILY REJECTION of the offer
Tenderer shall submit list of Plant & machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure - D of Chapter - 6 of tender Document. Offer submitted without these details shall be liable to be REJECTED.
Tenderer shall submit list of personnel/ organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure - E of Chapter - 6 of tender Document. Offer submitted without these details shall be liable to be REJECTED
Tenderer shall submit the information/declaration regarding association of Railway Officers with tenderer (S) as per Annexure - H of Chapter - 6 in terms of Clause 16 of Chapter - 2 of tender Document . On non - submission of this information, contract is liable to be dealt in accordance with provision ofClause 62 of Standard General Conditions of Contract.
Tenderer shall submit list of court cases during previous three financial years as per Annexure - I of Chapter - 6 of tender Document
Tenderer shall submit list of arbitration cases during previous three financial years as per Annexure - J of Chapter - 6 of the tender Document
Tenderer shall submit the certificate of familiarization to the work site as per Chapter - 5 of the tender Document.
Tenderer shall submit broad plan of execution of work as per Annexure - K of Chapter - 6 of the tender Document.
Tenderer shall submit details of other credentials/ facilities as per Annexure - N of Chapter - 6 of the tender Document.
Tenderer shall submit bank details i.e. Name of Bank along with Bank Branch code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorized official of the bank , to facilitate payment through ECS/NEFT/RTGS as per Annexure - O of Chapter - 6 of TenderDocument.
For tenders having advertised cost of Rs. 10 lakhs and above:-If tenderer desired to take payment through letter of Credit (LC) arrangement then tenderer shall exercise the option at the time of biding itself and shall affirm having read for and agreed to the terms and conditions of LC option. For details refer Clause - 7 of Chapter - 4 of Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid Security shall be accepted either in cash through e-payment Gateway or as Bank Guarantee bond from a scheduled commercial Bank of India. BG shall be as per Annexure-Q of Chapter-6 of Tender Document. No other mode of payment shall be accepted. Any firm recognized by Departmentof Industrial Policy and Promotion (DIPP) as 'startups' shall be exempted from payment of Bid Security . Labour Cooperative Societies shall submit only 50% of the Bid Security .
In case the date of closing mentioned in the NIT Header of etender document is declared a holiday/bandh/strike etc. on any account , the date of closing tender online will not be changed as the application in the website of IREPS does notpermit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on the following working day after the closing date/time of tenders.
Rates quoted by the tenderer in the relevant fields of the Financial Bid only will be the ruling terms for deciding interseranking and any condition having financial repercussions, if quoted, anywhere else shall not be considered for deciding the inter-se-ranking
Tenderer participating as JV shall refer the guidelines of Tender under Clause-17 of Tender Document and relevant clauses of IRSGCC 2022 regarding participation of Joint Venture Firms in Works Tender and documents to be submitted. If required documents for JV firm participation are not submitted the offer/Bid will be to SUMMARILY REJECTED .
(a)In case of any information submitted by tenderer is found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. (b) In caseof any information submitted by tenderer is found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
The tender shall be finalised based on submitted documents &no post tender correspondence shall be entertained. However, if any clarification is required by the Railway, the same will be sought from the tenderer which need to be provided by tenderer(s) within stipulated time failing which his/their offer(S)shall be dealt based on available information with Railways interpretation only
While submitting offers the tenderer(s) generally commit mistakes in submitting the mandatory documents like Certificates regarding contracting experience, Audited Balance Sheet duly certified by the Chartered Accountant, Certificate inrespect to true and factuality of documents, Information in connection with evalution of bid capacity, Power of Attorney, submission of tenders by authorized signatory, JV related documents etc. As such, THE TENDERER(s) SHOULDGOTHROUGH THE TENDER DOUMENT VERY CAREFULLY BEFORE SUBMITTING HIS/THEIR OFFER AND ACCORDINGLY UPLOAD ALL THE MANDATORY OCUMENTS AND OTHER RELEVANT DOCUMENTS as per the formats enclosed in the tender document
Tenderers must go through the tender documents to ascertain and get themselves acquainted with general conditions of contract, e-tendering process and two packet bid system (as applicable). The tenderer must also go through the other documents such as special conditions, additional technicalconditions, specification , drawings, scope of work etc. attached as documents on the website.
It is the responsibility of the tenderer to keep watch on IREPS website regarding Addendum/corrigendum etc. (if any) to tender notice up to the date of Bid closing . No separate intimation information shall be given in Newspapers or through any other means.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility of approach road, nature of the soil , availability of material, labour water etc. that may be encountered in course of execution of work
No Advance payment shall be made for mobilization .
No Advance payment against Plant and Machinery shall be admissible.
No advance/stage Payment will be payable for supply of Cement and Reinforcement Steel . Cement and Reinforcement Steel shall be paid only after its actual use in work
The quoted rates shall be inclusive of all taxes, levies etc. (including GST and royalty) leviable by State/Central Govt. or by local authorities. The rates shall be inclusive of all sales / turn over tax, Service Tax including all other Cess etc., on contract by respective State Govt
Tenderers are requested to go through the enclosed Additional Special Technical Conditions/ Specifications for various items included in tender schedule /Bid of quantities, etc.
Price Variation Clause (PVC) shall be applicable for Tenders having advertised value above Rs . 2 Crores
Electronic Reverse Auction (e-RA) will be applicable for tenders having advertised value more than Rs.50 Cr.
Until a formal agreement is prepared and executed , acceptance of this tender shall constitute a binding contract between us subject to modifications , as may be mutually agreed to between us and indicated in the letter if acceptance of my/our offer to this work.
Supply, Installation, Testing and Commissioning of Indoor , Outdoor Telecom Equipments including Trenching, Laying, Jointing, Splicing & provision of EC sockets etc. in SURAJPURA- SABDUA- BALUPUR and AJAYGARH section in PANNA- KHAJURAHO section and GAJRAHI-BAHARI- DEOSAR and GONDAWALI Section in Gajrahi - Singrauli section ,inclusive of sectional tunnels communication work along with balance work of Khajuraho (Excluding) - Singrauli Section in connection with NEW BG Rail Line Work of Khajuraho (Excluding) -Singrauli section on WCR
JBP-SnT-CON-TEND-Tele-139~WCR
JBP-SnT-CON-TEND-Tele-139
Open
Works - General
18 Months
Jabalpur, Madhya Pradesh
₹0
₹71.0 L
18 Sept 2026
18 Sept 2026
1 Oct 2026
457 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 20,19,22,883.11 | ||
| — | 14.00 | — | — | ||
| Design , Fabrication & Supply of rack mountable modular intelligent service aggregator router with minimum switching speed of 160 Gbps, and expandable to 260 Gbps, unit to support L2VPN /L3 VPN/MPLS- TP & IP MPLS, unit to be capable to support 4X25Gbps, 8xl0 Gbe, 32x1GbE, 32xE1, 4xSTM 1 ports or 1XSTM4 or 2ik8/2X4 port WDM support multiple routing functions such as OSPF, ISIS, BGP, MP-BGP and support LDP and RSVP-TE to Dynamically establish MPLS tunnels &, PW service. It should support dual main control card redundancy design supporting 1:1 hot back up. The router should support all the software features, environmental standards and security features as mentioned in RDSO technical document no STT/TAN/ IP-MPLS/ 2020 Ver1.0 or latest for the LER & LSR Router and should have the hardware interface requirement specified in this schedule. (Total LER-12 Nos - & LSR 02 Nos.) Chassis bundle including aggregator router with dual main control card redundancy design supporting 1:1 hot back up providing console and SNMP interface, FAN module and Redundant 48VDC power supply modules including all connecting cables and fixing accessories etc. INSPECTED BY RDSO | — | — | — | 1,10,99,224.5 | |
| — | 14.00 | — | — | ||
| Supply of 4 port x10G SFP module card suitable for the IP-MPLS router for S.No 1. INSPECTED BY RDSO | — | — | — | 3,83,873 | |
| — | 14.00 | — | — | ||
| Supply of 8 port x 1Gb E4FE/4 FX module card suitable for the IP-MPLS router for S.No.1. INSPECTED BY RDSO | — | — | — | 4,50,058 | |
| — | 14.00 | — | — | ||
| Supply of 16 port channelised E1 interface card (including 120 Ohms cable) suitable for the IP-MPLS router for S.No.1. INSPECTED BY RDSO | — | — | — | 9,59,682.5 | |
| — | 14.00 | — | — | ||
| Supply of 8Xl0 Gbps WDM interface module card or Channelized STM 1/4 card suitable for the above as per the site requirement and as instructed by site in-charge. INSPECTED BY RDSO | — | — | — | 11,78,093 | |
| — | 40.00 | — | — | ||
| Supply of SFP + 10G (40 Km) SMF,1550nm for 40 KM transmission working on single or dual fibre as per site requirement. INSPECTED BY RDSO | — | — | — | 9,64,410 | |
| — | 40.00 | — | — | ||
| Supply of SFP (1310nm) 1.25 Gbps as per the site requirement for Electrical l0/100/1000 Mbps Support as per site conditions. INSPECTED BY RDSO | — | — | — | 3,89,546 | |
| — | 12.00 | — | — | ||
| Supply of covered 19'' Racks of size 2200 mm X 600 mm X 600 mm (WQ/Vero President/Rittal/APC make) complete with all fittings including DC Fans (48 V) -2 Nos, seperator sheet/plate to keep testing equipments - 1 No and AC Power distribution panel (horizontal fitting) with power sockets and fuse/MCB protection (minimum 6 Nos of 230V- 15A/5A. combined) and other accessories. Rack should have compatibility with all equipment conforming to DIN 41494 or equivalent EIA/ISO/EN standard, Manufacturer must certify that products are compied with DIN41494 or equivalent EIA/IISO/EN/CEA/UL standards. (Inspected by Consignee) | — | — | — | 5,47,512.6 | |
| — | 8.00 | — | — | ||
| Supply of VRLA fully charged battery 48 V DC /300 AH (stackable) as per IRS:S- 93/96(A)(amd-1) or latest. INSPECTED BY RDSO. | — | — | — | 10,07,305.44 | |
| — | 8.00 | — | — | ||
| Supply of SMPS based 48 V(3+1) FR/FC module,25 Amp single phase 230 V,AC operated battery charger for telecom use as per RDSO /SPN/TL/23/99 (ver.4.0)with latest amendment, in N+1 configuration i.e using 3 module 1 back up of 48 V DC & 25 Amp with automatic switching between the module suitable for one set. It shall be equipped with surge and lighting protection of class B and C along with instruction and service manual As per Annexure. INSPECTED BY RDSO | — | — | — | 8,91,424.96 | |
| — | 29.00 | — | — | ||
| Supply of DC Power distribution panel to cater DC power requirements of IPMPLS/STM Multiplexers /PD Muxes / EOW / FANS to be fixed in 19" rack (Minimum 8 Nos of DC distribution arrangement with MCB's of suitable rating for -ve . Connecting copper strip for +ve). INSPECTED BY CONSIGNEE | — | — | — | 91,635.94 | |
| — | 60.00 | — | — | ||
| Supply of optical patch cords with FC-PC/SC-PC to SC-PC/LC-PC connectors (10 mts long), so as to suit the OFC terminations and the IPMPLS equipment supplied. INSPECTED BY CONSIGNEE | — | — | — | 5,843.4 | |
| — | 2800.00 | — | — | ||
| Supply of switch board cable 0.5 mm/10 pair of Finolex/Bhansali / Delton or Similar make. INSPECTED BY CONSIGNEE | — | — | — | 1,40,308 | |
| — | 5.00 | — | — | ||
| Supply of Krone tool. INSPECTED BY CONSIGNEE | — | — | — | 4,727.5 | |
| — | 19.00 | — | — | ||
| Supply & installation of 48 Fiber Distribution management system as per RDSO Specification No.RDSO/SPN/TC-37-2000(Ver.3) with latest Amendments as on the date of opening of tender.(It includes the supply of 19" 12 U rack with mounting arrangement). .. INSPECTED BY RDSO | — | — | — | 17,48,735.87 | |
| — | 25.00 | — | — | ||
| Supply of 19" Rack Mounted Fully loaded Fiber Management System for 24 fiber cable. Fully loaded FMS of SC Type adopters or as per requirement. INSPECTED BY CONSIGNEE | — | — | — | 4,59,287.5 | |
| — | 8.00 | — | — | ||
| Supply of 2 Mb programmable primary digital drop insert multiplexer operating 48 volts DC complete as per specification IRS-TC-68/2012 (Amdt-1) Webfil & Puncom or similiar make with latest amendment with conference facilityand other stipulations of tender document fully wired and equippedfor 30 channel complete with power supply card,remote contrl, supervision facility to accommodate data interface card inmulti drop mode and should be able to support card needed for video conferencing and ISDN.It shall also support NMS operationsfrom local/remote location.The chassis shall support 4 E1 card. WEBFIL Make-04 Nos & PUNCOM Make-04 Nos. The Mux should be equipped with following configuration. (i) 2/4 wireE&M card for 16 circuits (ii) Subscriber loop card for minimum 12 circuit (iii) 64 Kbps omnibus/Co-directional data interface card for 6 circuits (iv) E1 Branching card quantity 02 Nos.(Third direction) For PUNCOM MUX. (WEBFIL Make-04 Nos & PUNCOM Make-04 Nos)INSPECTED BY RDSO | — | — | — | 11,79,575.52 | |
| — | 16.00 | — | — | ||
| Supply, installation and programming of integrated Access Multiplexer 1U height,19" rack mountable with 4 DTE interface and one (V.21/V23) module supporting eight V21/V23 interface(2W/4W0,one talent port,one slot with low speed data interface RS -232, V24 of 8 port supporting baud rate as per technical specification in the annexure,one slot free, unit to support both AC/DC power supply,cable 50 pin SCSI connecters one number included, MROTEK Model MAPLE- 4C or equivalent as per technical details. (Annexure-MAPLE) INSPECTED BY CONSIGNEE | — | — | — | 12,41,751.68 | |
| — | 8.00 | — | — | ||
| Supply of Multi Telephone way station equipment with necessary mounting arrangement on standard 19" rack. It shall be (-) 48 Volt operated as per RDSO specification No. RDSO/SPN/TC/66/2007 (1.0) or with latest amendment. The equipment supplied in this work should be compatible with the existing MARVEL make system already installed in section. . INSPECTED BY RDSO | — | — | — | 5,57,527.92 | |
| — | 4.00 | — | — | ||
| Control communication Equipments for OFC, using 2 wire telephone, 3 way Amplifier (TWA)- suitable for working with control Room equipment & wayside equipment - as er RDSO Spec No RDSO/SPN/TC/66/2007 (1.0) or latest - from RDSO approved manufacturer, if any. INSPECTED BY RDSO | — | — | — | 68,416.88 | |
| — | 16.00 | — | — | ||
| Supply of push button telephones suitable for connecting with way side equipment and the system mentioned above as per TEC specification no. GR/TEL-02/04 Sept 2002 with latest amendment & from DOT/TEC approved firms. Make-Betel. INSPECTED BY CONSIGNEE | — | — | — | 7,240.8 | |
| — | 8.00 | — | — | ||
| Supply of Ultra isolation transformer 230/230-1.5 KVA with MOVR protection on either side to provide "X" protection and supply of crow bar surge protection circuit for 48 V DC side to provide "y' protection.(Note-Including supply of 48V DC to 5 V DC Converter) Make-Manak or Similar make. INSPECTED BY CONSIGNEE | — | — | — | 1,32,933.68 | |
| — | 22.00 | — | — | ||
| Supply of Magneto phones with electro magnetic transducer Desk type as per Specification IRS: TC/36/97 Ammdt-1 or with latest Amendments. INSPECTED BY CONSIGNEE | — | — | — | 65,360.02 | |
| — | 6.00 | — | — | ||
| Supply and installation of class-B type lightening arrester for single phase supply along with class-c type surge arrester for single phase supply as per WC railway specification No WCR/SPN/Tele/08/01. (Drawing attached) INSPECTED BY CONSIGNEE | — | — | — | 25,134.36 | |
| — | 128.00 | — | — | ||
| Supply of permanently lubricated HDPE pipe 40/33mm dia. As per RDSO specifications no. RDSO/SPN/TC/45/2013 Rev .2.0 with latest Amendment 3.0/Revision, suitable for armoured 24 fiber OFC cable with end cap, as required for the OFC system ( NOTE: At a time, the contractor will have to supply according to the requirement of the site with the approval of officer-in- charge).. INSPECTED BY RITES. | — | — | — | 94,77,073.92 | |
| — | 1000.00 | — | — | ||
| End plug. INSPECTED BY CONSIGNEE. | — | — | — | 36,390 | |
| — | 800.00 | — | — | ||
| plastic coupler. INSPECTED BY CONSIGNEE.. | — | — | — | 39,416 | |
| — | 3.00 | — | — | ||
| Rotary duct cutter. INSPECTED BY CONSIGNEE. | — | — | — | 4,384.8 | |
| — | 1200.00 | — | — | ||
| Cable sealing plug. INSPECTED BY CONSIGNEE. | — | — | — | 59,124 | |
| — | 10000.00 | — | — | ||
| Supply of DWC HDPE pipe with one snap fit coupler and 'O' ring conforming to IS 14930 (part 2:2001) with lattest ammdt, Non metallic, normal duty, pliable, without protection against chemical attack and fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia & 103.5 mm inner dia. INSPECTED BY RITES. | — | — | — | 25,73,700 | |
| — | 10000.00 | — | — | ||
| Supply of 100 mm GI pipe medium grade of IS specification No 1239 (pt-1) 2004 (Six revision) or latest with sockets and fittings, nominal dia 100mm outside dia (Max 115.0mm, Min 113.1mm), Thickness (4.5mm), Mass plain end (12.2Kg/m), Mas Screwed and socketed (12.5 Kg/m), Tolerance in Thickness {(+) not limited, (-) 12.5 percent)} and Tolerance in Mass (+ 10 %, - 10%). INSPECTED BY RITES | — | — | — | 1,09,39,800 | |
| — | 62.00 | — | — | ||
| Supply of 24-fiber armoured optic fiber straight joint enclosure (SJC) complete with all accessories as per RDSO/SPN/TC/68/2025 Revision-2.0 with latest Amendments. Inspected by RITES | — | — | — | 2,80,677.1 | |
| — | 6.00 | — | — | ||
| Supply of office Table similar to model 'T-8' Godrej, Gee-KEN make and model or similar. Dotted embossed cable duct and perforated steel modesty panel on visitors side. All steel components are epoxy powder coated after seven tank corrosion treatment of surface with three drawer on both side. Godrej or similar. INSPECTED BY CONSIGNEE. | — | — | — | 84,269.1 | |
| — | 6.00 | — | — | ||
| Supply of SB Collection revolving chair with arm torsion bar mechanism with single point Q3 category (SBC-11). Make: SB Collection, GEM Product id: 5116877- 28030280226.INSPECTED BY CONSIGNEE. | — | — | — | 76,489.08 | |
| — | 6.00 | — | — | ||
| Steel Almirah of size 1980H x 915 W x 485 D with 4 adujstable panels making 5 shelves (without locker for office use). Almirah shall be made from CRCA steel sheet of 20 gauge ( for panel partition). Almirah shall be 100% epoxy powder coated Make Godrej or equivalent. INSPECTED BY CONSIGNEE. | — | — | — | 1,09,495.2 | |
| — | 6.00 | — | — | ||
| Supply of Computer Table (Model Stylo of Godrej Make or Similar of Featherlite make) & Chair (Godrej make Model Spyder PCH 5602 or Similar Model of Featherlite Make). INSPECTED BY CONSIGNEE. | — | — | — | 1,24,606.68 | |
| — | 24.00 | — | — | ||
| Supply of SB Collection office /visitor chair with seat D X W X H, 430 mm 500 mm 460 padded with polyurethane foam visitor (SBM-13). These chairs should be non revolving type and the arms of chair should have cover for suitable length. Make: SB Collection, GEM Product ID :5116877- 19936500738. Inspected by Consignee. INSPECTED BY CONSIGNEE. | — | — | — | 1,81,195.68 | |
| — | 6.00 | — | — | ||
| Supply of office Table Godrej Interio steel table with storage on one side, size 1660mm x 900mm x 735mm. Make: Godrej, Model-Godrej Interio Enterprise 1650 Table or similar. GEM Product ID: 5116877-95972725086. INSPECTED BY CONSIGNEE. | — | — | — | 1,69,339.08 | |
| — | 90.00 | — | — | ||
| Supply of Thermo-shrinkable jointing kit as per specification No. IRS: TC: 77/2012 revision 3 or latest of suitable size of derivation joint for 2 T Joint RTSF (75/15mm) suiting to 06 quad jelly filled underground cable of Specn. No. IRS: TC: 30/97 or latest and 10 pair PIJF derivation cable of Specn. No. IRS: TC: 41/97 with latest amendments. with or with out transformer. . INSPECTED BY RDSO | — | — | — | 3,35,786.4 | |
| — | 80.00 | — | — | ||
| Supply of Thermo-shrinkable jointing kit as per specification No. IRS-TC-77/2010 Rev.2 with latest amendments for Straight through joint suitable to 06 quad jelly filled underground cable of Specn. No. IRS: TC:30/97 with latest amendments. INSPECTED BY RDSO | — | — | — | 2,98,476.8 | |
| — | 30.00 | — | — | ||
| Supply of VF tapping transformer as per IRS/TC/22/2021 of impedance ratio -600:470 .. INSPECTED BY CONSIGNEE. | — | — | — | 42,893.7 | |
| — | 90.00 | — | — | ||
| Supply of isolation cyclindrical type for 2T joint as per RDSO specification transformer as per IRS/TC/76/2021 of impedance ratio -1120/470. INSPECTED BY CONSIGNEE. | — | — | — | 80,462.7 | |
| — | 30.00 | — | — | ||
| Supply of One Quad V.F. 2-T Transformer joint assembly of VF Transformers 1120:470 as per IRS/TC/76/2021. INSPECTED BY CONSIGNEE. | — | — | — | 53,980.5 | |
| — | 90.00 | — | — | ||
| Supply of FRP material based EC socket box Spec . No- RDSO/SPN/TC/44/2002 version 3.0 with latest Amdt . INSPECTED BY CONSIGNEE. | — | — | — | 79,744.5 | |
| — | 90.00 | — | — | ||
| Supply of 6 pin emergency plug and socket flat type as per specification No-IRS-TC- 42/2020 Version: 1.1. INSPECTED BY CONSIGNEE. | — | — | — | 56,400.3 | |
| — | 8.00 | — | — | ||
| Supply and Installation of 12V,100 AH VRLA battery set as per specification IRS S93/96 (A) Amdt-1 with latest amendments. INSPECTED BY CONSIGNEE | — | — | — | 1,37,872.64 | |
| — | 8.00 | — | — | ||
| Supply of SMPS based battery chargers (SMPS) power supply unit 230 V /12V DC, 10 Amp as per IRS:S;93/96 (B) Amdt-1.with latest amendments. INSPECTED BY CONSIGNEE | — | — | — | 1,37,872.64 | |
| — | 36.00 | — | — | ||
| Supply of CAT-6 500 MHz STP cable roll of 305 meter length/roll/bundle, compliant with latest EIA/TIA-568-B-2-1 standard. Make - AAMBERNET /DC6C / AUTP4P3X, DIGILINK or similar with latest amendments. INSPECTED BY CONSIGNEE Per unit = Per Box | — | — | — | 3,28,126.32 | |
| — | 15000.00 | — | — | ||
| Supply of PVC insulated armoured 3 core 2.5 Sqmm, Multistrand, 14 AWG, 1.1KV Grade outdoor strengthen copper for UPS power supply distributions and all accessories required for installation. Conforming to IS:1554 Part-1.Make: Delton /Finolex or similar with latest amendments. Data sheet attached in (Annxure) INSPECTED BY RITES | — | — | — | 12,55,200 | |
| — | 1.00 | — | — | ||
| Supply, Installation and Commissioning of 2x10 KVA on line UPS at least 2 Hour Backup in full load condition, connected in parallel redundant mode. Complete with all accessories as per specification data sheet attached. This also includes supply of two set MF batteries of suitable AH capacity, Rack, One set compatible MCBs, complete with cover & fixing materials, One Earth leakage circuit breaker arrangement.(Annxure- Data sheet) INSPECTED BY CONSIGNEE. | — | — | — | 4,01,536.83 | |
| — | 24.00 | — | — | ||
| Supply of PA collumn speaker 20 watts with 100V line matching transformer (I/P power 20 W RMS 30 W Max, power TAPS 20/15/10/5 W, impedence voltage 100v, frequency Response 150-15, 000 Hz, SPLat 1 KHZ-93 Db1w1m, equilvalent to Model ASC-320T Accepted make- Ahuja, Philips, AKG boss, Hitune.with latest amendments. INSPECTED BY CONSIGNEE | — | — | — | 41,691.6 | |
| — | 6.00 | — | — | ||
| Supply of microphone ACM-96CH of Ahuja make or similar. INSPECTED BY CONSIGNEE | — | — | — | 9,024.24 | |
| — | 2.00 | — | — | ||
| Supply of Central Data Controller (CDC) with all accessories including Central Data Switch as per Specification No. RDSO/SPN/TC/ 108/ 2019, Rer.-1.0, Amdt-1 or latest for IP Based Integrated Passenger Information System (IPIS), loaded with Operating software as per RDSO/SPN/TC/ 108/ 2019, Rer.-1.0, Amdt-1 or latest amendments. INSPECTED BY RDSO | — | — | — | 13,23,700 | |
| — | 4.00 | — | — | ||
| Supply of platform data controller as per Specification No. RDSO/SPN/TC/ 108/ 2019, Rer.-1.0, Amdt-1 or latest. INSPECTED BY RDSO | — | — | — | 1,88,721.8 | |
| — | 2.00 | — | — | ||
| Supply of 5 line multiline Train information display board RDSO/SPN/TC/108/2019 Ver. 0.0 with amendment 1.0 or latest.. INSPECTED BY RDSO | — | — | — | 11,30,439.8 | |
| — | 12.00 | — | — | ||
| Supply of single line double faced train Arrival departure display boards as per RDSO/SPN/TC/108/2019 Ver. 0.0 with amendment 1.0 or latest. . INSPECTED BY RDSO | — | — | — | 19,45,839 | |
| — | 52.00 | — | — | ||
| Supply of Single Line Double Faced Coach Guidance Display Board (for Ajaygarh stations), as per Specification No. RDSO/SPN/TC/108/2019, Rer.-1.0, Amdt-1 or latest. Along with junction box and other accessories. INSPECTED BY RDSO | — | — | — | 25,05,007.96 | |
| — | 51000.00 | — | — | ||
| Supply of PVC conduit pipe 1" diameter or better( medium grade-1.4 mm thick minimum) of ISI marked of reputed brand. INSPECTED BY RITES | — | — | — | 20,97,630 | |
| — | 4.00 | — | — | ||
| Supply of optical power meter having resolution of 0.1 db and measuring range +3 dbm to -60 dbm as per TEC specification No GR/OPM-01/03 FEB 05 with latest amendments. INSPECTED BY CONSIGNEE | — | — | — | 85,635.84 | |
| — | 2.00 | — | — | ||
| Supply of automatic fusion splicer fully automatic RTC microprocessor controlled ( ARC fusion type) splicer with VIDEO display, warm image processing, Heat oven, Fibre fixtures, battery backup, high precision fibre cleaver, stripping tool and other compatible accessories of TELOGICA Splice Master - 80S or higher version make-ATTL or equivalent Model or Similar with all accessiories like 3 in 1 striper, high precision cleaver, AC adopter with cable cord, battery pack, spair electrod, software CD, hard carrying case,PC interface cable, cleaning brush along with sufficient no. of splice protection sleeves and bottle of isopropyl alcohol to be supplied for test splice. As per TEC specification No GR/TX/OSM/001/04/SEPT 2012 or latest amendments in force at the time of tender opening. INSPECTED BY RITES | — | — | — | 15,08,566.18 | |
| — | 2.00 | — | — | ||
| Supply of Mini OTDR suitable for 1310/1550 nm fibre with resolution of 60 cm dynamic range of 31/29 db or better with all accessories, USB drive with a flash ROM of minimum 1Gb, AC adaptor/Charger, Rechgeable battery, Manuals, Hard and Soft carrying case etc as per TEC specification No TEC/GR/TX/OTD 01/04 APR 2010 with latest Make: VIVAI MTS-6000,TELOGICA ATL- 1315Bi or YOKOGAWA AQ-7280+AQ-7284A or higher version or similar at the time of tender opening. INSPECTED BY RITES | — | — | — | 10,81,694.68 | |
| — | 2.00 | — | — | ||
| Supply of pocket fault locator of OFC to indicate cable point of lose. INSPECTED BY CONSIGNEE | — | — | — | 1,24,504.02 | |
| — | 15.00 | — | — | ||
| Supply, installation, commissioning of GPS synchronized double sided (Red LED) type digital platform clock as per RDSO spec No RDSO/SPN/TC/62 / 2008 Rev.4.1 or latest Amdt. INSPECTED BY RDSO | — | — | — | 7,88,930.4 | |
| — | 2.00 | — | — | ||
| Supply of maintenance tool kit as per TEC specification as per Annexure. (i) Digital multimeter 4 1/2 digit with Liquid cristal display 1 No. of philips/Motwane Make. (ii) Utility knife-1 no. (iii) cable slitter-1 no. (iv) Tubing cutter for cable armour-1 no. (V) Bare fiber adaptor-1 No. (vi) Miller high precision stripper for fiber buffer -1 No. (vii) Cleaver Fujikura make or similar -1 No. (viii) Mechanical splice joint set, 1 set consisting of 6 Nos.(ix) Ceramic scissor CSI - 1No. (x) FC/PC Adopter with ODB loss- 10Nos. (xi) Optical fiber terminal block v groove - 2Nos. (xii) Earth resistance measuring instrument with all accessories suitable for measuring earth resistance in range of 0.1 Ohms to 10 Ohms.-01 Nos. (xiii) Megger-01 Nos. (xiv) Laser distance meter PRO-L100-02 Nos. (xv) Supply of digital multimeter 3 3/4 digit liquid crystal display type ( Philips or motwane make). (xvi) Supply of LPG Blow Lamp - 02 Nos. and Kerosene Blow Lamp - 2 Nos. (For used in copper cable jointing) (xvii) Supply of Mini Hammer set with chisel set with covered holder. INSPECTED BY CONSIGNEE | — | — | — | 3,73,512.08 | |
| — | 140.00 | — | — | ||
| Supply of antistatic insulation mats for electrical purpose 2.5mm thick, size 2m x 1m suitable for 3.3 KV to 11 KV Class B Conforming to IS - 15652-2006. INSPECTED BY CONSIGNEE | — | — | — | 2,34,449.6 | |
| — | 18.00 | — | — | ||
| Supply , fixing & cable termination of 100 pair Krone DP box suitable for external/Internal use. INSPECTED BY CONSIGNEE | — | — | — | 1,16,014.14 | |
| — | 22.00 | — | — | ||
| Supply , fixing & cable termination of 20 pair Krone make Krones tools. INSPECTED BY CONSIGNEE | — | — | — | 72,842.22 | |
| — | 4.00 | — | — | ||
| Supply of PC based network health and diagnostic system with report generating facility as per specification. INSPECTED BY CONSIGNEE | — | — | — | 3,40,117.32 | |
| — | 8.00 | — | — | ||
| Supply of GSM 4G FCT phone with 4G connectivity (Fixed Cellular phone) with built in battery and extendable battery charger as per specifications attached. Make - Visiontek, Beetel, Binatone or similar or latest. Accepted Make: Beetal Model F-3-4G. INSPECTED BY CONSIGNEE | — | — | — | 40,460.72 | |
| — | 4.00 | — | — | ||
| Supply of optical dual LASER source (1550nm/1310nm) as per TEC GR No. GR/SLS- 01/03 Feb-2005 Type C (Dual Wavalength) or latest Amdt.. INSPECTED BY CONSIGNEE | — | — | — | 3,28,681.92 | |
| — | 20.00 | — | — | ||
| Supply of 24 U rack/12 port LIU(Data rack-DR-SS-6024-06) for housing of amplier, charger and battery.. INSPECTED BY CONSIGNEE | — | — | — | 2,45,830 | |
| — | 117.00 | — | — | ||
| Supply & installation of maintenance free earth consisting as per RDSO specification No. RDSO/SPN/197 (version 3.1 or latest) or consisting of single earth pit which includes supply of 35 mm²/16 mm²/10 mm² multistrand single core PVC insulated copper cable as per IS 694 for connecting main earth electrode to MEEB in the equipment room in duplicate as per manufacturers recommendations and as per RDSO specifications as follow: (1) Copper bonded steel electrode of 3.0 meters long, 17 mm diameter with copper bonding thickness of minimum 250 microns and UL listed and marked: 1 No. (2) Earth enhancement compound of RDSO approved brand supplied in sealed bag of minimum 10 KG: 3 Nos. (3) Copper strip of 200mm X 25 mm X 6 mm to terminate earth rod: 1 No. (4) Copper strip of 300mm X 25 mm X 6 mm (MEEB): 1 No. (5) Copper strip of 200mm X 25 mm X 6 mm (MEEB): 1 No. Installation of maintenance free earth includes:Digging/auguring/boring of single earth pit of 100 mm to 125 mmdiameter to the depth of approximately 2.8 meters. Insertion of three meters electrode and penetrating it atleast 0.2 meters by pushing gently with sledge hammer where the neutral soil is assumed. Filling of earth pit with earth enhancement compound (EEC) in slurry form and back filling. Carrying out exothermic weld connection of single earth electrode to a copper tape of 200 mm X 25 mm X 600 mm. Carrying out exothermal weld connection on the copper tape of 200 mm X 25 mm X 6 mm on earth electrode for connecting two 35 mm² cable for redundancy. The exothermal welding material for bonding the earth system shall be procured from RDSO approved firms which includes graphite moulds, clamps, weld metal powder. 400 mm X 400 mm X 400mm(inside dimension) concrete earth pit with a concrete lid approximately 50 mm thick with pulling hooks shall be provided to cover the pit. Back side of the cover will be painted in black and date of testing and average earth resistance value shall be written. SUPPLY PORTION INSPECTION BY RDSO | — | — | — | 41,86,788.84 | |
| — | 70.00 | — | — | ||
| Supply of Single Mode Patch Cord length 3 meters (LC-SC/SC-SC/LC-LC/FC-LC) as per site requirement. INSPECTED BY CONSIGNEE | — | — | — | 13,818.7 | |
| — | 24.00 | — | — | ||
| Supply of fire extinguisgher 4.5 Kgs,Co2 gas ISI make with test certificate make ,Minimax or VINTAX or similar. INSPECTED BY CONSIGNEE | — | — | — | 1,85,337.36 | |
| — | 2.00 | — | — | ||
| Supply of cable avoider tool (cable location equipment) of make 3m/C-scope/RIDGID suitable for detecting & route tracing of buried equipments as per specification mentioned in the tendder documents given by Railways when survey of the repute is to be done this tool should be utilized to avoid the path of existing cables, pipes buried under the ground. The line marking should be taken from railway supervisor accordingly before starting the trenching work. Each set shall containing cale locations unit 01 no. clamp complete with wires etc. 01 no. INSPECTED BY RITES | — | — | — | 5,85,201.86 | |
| — | 20.00 | — | — | ||
| Supply of 30 MBPS FE on 4w/2w high through put Ethernet Extender configurable 2w/4w unit to support stand alone with four ETH ports ( 10/100 Mbps) and internal power supply supporting AC/DC ( 48VD & 110 VDC) form a single socket as per RDSO Spec RDSO/SPN/TC/82/2020 Rev.2.0. Make/Brand - TEAMLINK/VAYU or similar with latest Amdt.. INSPECTED BY CONSIGNEE | — | — | — | 5,01,364.4 | |
| — | 8.00 | — | — | ||
| Supply of 48 Mbps or higher OFDM outdoor TDM Redundant Backup (4xE1) Radio Equipment with Ethernet plus 4xE1 future capable capacity in unlicensed frequency band of 5.8 Ghz for back-up RF link (Automatic Change-over to wireless in case of wireline failure and vice versa) alongwith DC power supply arrangement and accessories as per enclosed specifications. The unit consist of 01 no. outdoor unit (ODU) + 01 no. indoor unit (IDU) as per RDSO spec no. RDSO/SPN/TC/91/2012 Rev-1 or latest amendment wireless backup system consisting of : (a) IDU E1 indoor unit for E1 back-up, 2 Ethernet interface, supporting wide range DC input (20 to 60 VDC). (Make: RADWIN/Cambium/RAD or equivalent). (b) ODU/F58 Outdoor unit for external antenna for 5.8 GHz band INDIA unlicencsed. (Make: RADWIN/Cambium/RAD or equivalent). (c) 5.8 GHz external antenna with gain of 28 dbi or higher along with mounting arrangement. (c) 5.8 GHz external antenna with gain of 28 dbi or higher along with mounting arrangement. (d) STP cable as per requirement. (e) STP RJ-45 connectors.(f) Site survey. (g) application software on CD-ROM contains installation & operational manual and link budget calculator. Work will be carried either by OEM or his authorized representative. Note-1 Contractor will supply all the document in 2 hard copy and 1 CD along with each equipment. In case the distance of tower is more than 45 meter from the indoor units, necessary modem/repeater/amplifier should be provided by vendor. INSPECTED BY RITES | — | — | — | 18,78,811.68 | |
| — | 8.00 | — | — | ||
| "Supply of Control IP telephones without hands free and gooseneck operation for way side stations as per clause 11 of RDSO specification No.RDSO/SPN/TC/99/2023 Rev.3.0 or latest Amdt. INSPECTED BY RDSO | — | — | — | 1,96,936.32 | |
| — | 4.00 | — | — | ||
| Supply, Installation, testing and commissioning of ASM Room equipment as per RDSO specification No. RDSO /TC /49 /2020 Ver1.0 (Part A) rev. 1 or latest RDSO specification (1) control Equipment with voice logging & GSRP. (2) Power supply 12V DC/15p. of reputed Make (3) Battery12V, 120 AH make Exide or equivalent(4) Solar panel 70 watts, 12 V Nominal voltage Make BP,CEL or equivalent. INSPECTED BY RDSO | — | — | — | 16,32,024.16 | |
| — | 22.00 | — | — | ||
| Supply of Single Mode Single Fibre Managed Media Converter (Ethernet and E1 to Optical and vice-versa) pair compatible up to 20 Km and all the accessories for their installation with -48V DC to 230V AC converter, as per RDSO specification No. RDSO/SPN/TC/103/2013 Rev.3 or with latest Amdt. INSPECTED BY RDSO | — | — | — | 4,28,186.88 | |
| — | 11000.00 | — | — | ||
| Supply of 12 core metal strengthened outdoor unarmoured OFC Cable (ITUTG-652- D)or with latest Amdt and all the accessories required for installation. INSPECTED BY CONSIGNEE | — | — | — | 1,57,850 | |
| — | 16.00 | — | — | ||
| Supply of 2LAN/ (8x2) Mbps WAN port routers -48v DC operated with required connecting cables and connectors to connect the Ethernet devices and with rack mounting as er specification attached. Make: CISCO/3-COM/HP/NORTEL/MROTECH or with latest Amdt or equivalent. INSPECTED BY CONSIGNEE | — | — | — | 18,47,582.72 | |
| — | 16.00 | — | — | ||
| "Supply of Modem Leased line 2 Mbps Digital modem(nx64Kbps) upto 2Mbps (Line Driver).RDSO/SPN/TC/80/2020 Rev. 2.0 or with latest Amdt. Make Teamlink/MROTEK or equivalent. INSPECTED BY CONSIGNEE | — | — | — | 2,36,889.6 | |
| — | 8.00 | — | — | ||
| Supply, installation of 19" 24U/27U (as per site requirement) 600mm depth rack with standard accessories (closed type Telecom rack) with front door glass door type, all doors should be removable type, two exhaust fans, two horizontal tray removable type, one AC Multiple (6 Nos. of 6 Amp socket), Earthing strip copper, with fastener - 2PAC Rack Mountable DCDB Panel with one copper strip and 4 MCB 06Amp +02 MCB 16 Amp. INSPECTED BY CONSIGNEE | — | — | — | 2,58,840.08 | |
| — | 8.00 | — | — | ||
| Supply, installation of 19" 12U rack wall/pole mount with front door glass door type, all doors should be removable type with all accessories like two exhaust fans, one horizontal tray removable type, one AC Multiple (6 Nos. of 6 Amp socket), Earthing strip copper etc.. INSPECTED BY CONSIGNEE | — | — | — | 95,306.4 | |
| — | 18.00 | — | — | ||
| Supply, installation of 19" 9U rack wall/pole mount with front door glass door type, all doors should be removable type with all accessories like two exhaust fans, one AC Multiple (6 Nos. of 6 Amp socket), Earthing strip copper etc. INSPECTED BY CONSIGNEE | — | — | — | 1,57,514.76 | |
| — | 35.00 | — | — | ||
| Supply and Termination at Wall/Rack Mountable of 12 Fibre FDMS 12 SC type FDMS loaded with SC '0' DB and adaptor SC/SM pigtail 1.5 meters, all accessories required for installation suitable for splicing and front patching of 12 fibre cable with all accessories and terminating the optical fibre with splicing and front patching in the equipment room or places as required by the Railway representative (OFC Patch cord and all other materials required for splicing are to be supplied by the contractor. INSPECTED BY CONSIGNEE | — | — | — | 3,25,689.35 | |
| — | 10.00 | — | — | ||
| Supply of 2 TB surveillance Hard Disk of Segate / Toshiba /WD or Similar make. INSPECTED BY CONSIGNEE | — | — | — | 56,287.9 | |
| — | 6.00 | — | — | ||
| Supply, Installation, testing and commissioning of LC gate equipment as per RDSO specification No. RDSO/TC/49/2020 Ver 1.0 (Part A)rev.1 or latest with (1) Control equipment (2) Power supply 12VDC/15 Amp (3) Battery 12 V,120AH. (Inspection Authority RDSO) | — | — | — | 17,54,721.78 | |
| — | 330.00 | — | — | ||
| Supply of self support mast/Complete Triangular 11" or higher Lattice (Guyies) Mast assembly along with mast mounting unit consists of: (a) Supply of Triangular 11" or higher Lattice (Guyies) Mast/ Self Supported Mast Assembly with sections of approx 03 mtr. each (b) MS pipes with IS certification of outer diameter of 1" or higher should be used. As per attached drawing. . INSPECTED BY CONSIGNEE | — | — | — | 4,33,085.4 | |
| — | 5.00 | — | — | ||
| "LENOVO,DELL, HP and similar(All-in-One 24,13th Gen Intel Core i7- 1355U,23.8inch(61 cm) ,FHD,Anti-Glare,16 GB DDR4,512GB SSD, 710 White Wireless Keyboard and MouseCombo,Windows 11,Shell White, 5.53kg,24- cr0037in along with UPS ZEBRONICS Zeb-U725 600VAUPS for Desktop/PC/Computers (not for Routers) with Automatic Voltage Regulation,BlackBrandZEBRONICS Battery Cell CompositionLead Acid Product Dimensions28D x 10W x 14.2HCentimeters Voltage230 Volts ColourBlack About this item it is generator compatible. Output voltageregulation (Batt.mode):+/- 10% Protects from overloading. Input voltage rage : 140-300VAC. SurgeProtection : Yes micro controller based sleep mode charging LED indicator Capacity 600VA Transfertime Typics4-8 ms Recharge time 6 hours to 90% after complete discharge The ups is not compatible with router INSPECTED BY CONSIGNEE | — | — | — | 4,56,010.05 | |
| — | 8000.00 | — | — | ||
| Supply of 2 Core PVC insulated shielded wire PA cable 24strand copper conductor of0.20 mm(24/0.20 mm). Make-Brimson/ Deltron/Network or equivalent . INSPECTED BY CONSIGNEE | — | — | — | 1,51,760 | |
| — | 5.00 | — | — | ||
| "HP, EPSON, CANON,Brother ( MFC-T4500DW) and similar All-in-One Colour InktankRefill System Printer with Wi-Fi and Auto Duplex Printing,Black BrandBrother ConnectivityTechnologyWi-Fi Printing TechnologyInkjet Special FeatureAuto Duplex ColourBlack ModelNameMFC-T4500DW Printer OutputColour Maximum Print Speed (Colour)27 ppm Max Print speedMonochrome35 ppm Item Weight20.5 Kilograms See less About this item Printer Type - Ink Tank ;Functionality - All In One (Print, Scan, Copy, Fax) ; Printer Output - Color Connectivity - USB, Wi-Fi,Wi-Fi Direct Genuine Ink Bottles - BTD60BK, BT5000 C, M, Y; Page Yield - 13000 pages (Black), C, M,Y - 5000 pages each (Colour) Ink Color : Black, Cyan, Magenta and Yellow A4, Letter, Legal, MexicoLegal, India Legal, Folio, Executive, A6, Envelopes (C5, Com-10, DL, Monarch), Photo (4"" x 6"")/(10 x15 cm), Photo 2L (5"" x 7"")/(13 x 18 cm), Index card (5"" x 8"")/(13 x 20 cm) Page Yield - 13000pages (Black), C, M, Y - 5000 pages each (Colour) 1 year On-Site warranty; Operating Temperature -10 to 35 Degree Celsius INSPECTED BY CONSIGNEE" | — | — | — | 2,72,924.5 | |
| — | 12.00 | — | — | ||
| Augmentation of above setup at Sr.No. 77 for the capacity enhancement of 48 Mbps Radio to 200 Mbps Radio with fully functional 4XE1 Auto Changeover System.(Make: RADWIN/Cambium/RAD or equivalent) | — | — | — | 15,12,357.48 | |
| — | 13.00 | — | — | ||
| Supply of 25 Watt VHF Digital Radio Set as per RDSO/SPN/TC/107/2018 Ver. 2.1, complete with microphone, antenna, 30 m antenna cable, 13.5V DC 10A power supply and 12V 100AH VRLA battery. Make-Convey C1-DM with battery. INSPECTED BY RDSO | — | — | — | 5,28,463 | |
| — | 40.00 | — | — | ||
| Supply of 5 watt VHF Digital Walkie Talkie Set without Keypad and without Display as per RDSO Specification No. RDSO/SPN/TC/107/2018 Ver.2.1 or latest .Each set will consist of:- (1) One [1] no.VHF Set with OEM Battery of IP 67 rating + Battery Charger + Antenna + suitable Belt Clip in complete Box packing. (2) One [1] no. spare Battery of OEM with IP 67 rating to the VHF Set as per RDSO Specn. No. RDSO/SPN/ C/107/2018.Ver. 2. 1 or latest. NOTE 1 : Requirements of para 10 of above RDSO specification. NOTE 2 : Type of battery should be Li-ion. NOTE 3 : 45 sets of pendrive with programming software and compatible connecting cable for programming the VHF sets should be supplied with complete lot. (1 set consisting of 1 no pendrive and 1 no connecting cable) NOTE 4 : The OEMs overall Warranty period should be for 5 years from the date of supply for the Radio Set and minimum 1 year for the VHF set Battery, Spare Battery, Battery Charger and Antenna. INSPECTED BY RDSO | — | — | — | 9,81,760 | |
| — | 10.00 | — | — | ||
| Supply of UPS capacity of 1 KVA, having MOSFET-PWM technology rated output of single phase 230 V AC,50 Hz inbuilt battery with 30 minutes backup. Make- Scientech, Luminious, Sukam, APC, Uniline, Mrotec or similar. INSPECTED BY CONSIGNEE. | — | — | — | 29,789.5 | |
| — | 2.00 | — | — | ||
| Digital Transmission Measuring Set complete with in built rechargeable battery, tone generator, DB meter & testing leads, as per RDSO spec. IRS:TC- 43/87. (Warranty Period : Upto 30 months from the date of supply) FIRM OFFER MAKE/BRAND:Bentron Power Systems, Model - AFT- 999A ( Warranty Period : Upto 30 months from the date of supply) INSPECTED BY CONSIGNEE | — | — | — | 49,560 | |
| — | 2.00 | — | — | ||
| Cross Talk Measuring Set Type378-A - as per IRS TC-45/88 orlatest - Anu vidyut or superior, asapproved by Engineer-in-charge. INSPECTED BY CONSIGNEE | — | — | — | 7,527.9 | |
| — | 4.00 | — | — | ||
| Digital Insulation Tester - as approved by Engineer-in-charge -Make Fluke /Megger /Meco / Hioki. INSPECTED BY CONSIGNEE | — | — | — | 1,14,525.72 | |
| — | 10.00 | — | — | ||
| Supply of 4Wire/2Wire Portable Emergency Control Telephone. Spec No- IRS-TC-75-99 Amdt-4 or with latest Amdt. INSPECTED BY CONSIGNEE | — | — | — | 26,580 | |
| — | 2.00 | — | — | ||
| Earth Resistance Meter - as approved by Engineer-in-Charge. Make: Fluke /Benning/ Megger/Kyoritsu. INSPECTED BY CONSIGNEE | — | — | — | 26,641.18 | |
| — | 2.00 | — | — | ||
| Supply of Master Unit for VHF simplex system as per RDSO specifications No. RDSO/SPN/TC/109/2023 Ver 1.0 with latest Amendment/Revision, to be provided at each station and/or in between two tunnels (wherever isolation is available to provide coverage in between tunnels if required). The Master Unit will consists of (a) Off Air Channelised repeater (Bi- Directional Amplifier) for VHF simplex system and (b) Supply of Optical converted unit of Master Unit for VHF simplex system having suitable number of ports to connect required number of remote units through optical fibres.Note:Railway Envisaged One Master Unit for each station which should be able to cover all the tunnels of one block section in redundant mode.Contractor is free to use as any number of optical units to provide sufficient number of ports for complete section for complete Radio overage as mentioned in scope of work. Master unit can be either single unit or separate units of OMU and Off Air Channelized repeater. INSPECTED by RDSO | — | — | — | 83,26,785.7 | |
| — | 30.00 | — | — | ||
| Supply of Optical Remote Unit for VHF Simplex system with Main and Standby Master Unit connections as per RDSO specification No .RDSO/SPN/TC/109/2023 Ver 1.0 with latest amendment/Revision. One ORU should be able to connect minimum three OMUs (two at stations and one at in between tunnels or as per site requirement.). INSPECTED BY RDSO | — | — | — | 4,53,71,249.1 | |
| — | 1.00 | — | — | ||
| Supply, Installation and Configuration of Network Monitoring system for VHF (Simplex) Communication System, including all hardware and software as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY RDSO | — | — | — | 4,48,902.3 | |
| — | 30.00 | — | — | ||
| "Supply of 7/8"" Leaky Radiating Cable Fire Retardant Low Smoking Zero Halogen (FRLSZH) rated as per Specification No. RDSO/SPN/TC/109/2023 Ver 1.0 with latest amendment/revision technical specification attached in Chapter - 2 of Part - II in tender document.INSPECTED BY RDSO | — | — | — | 1,87,95,302.4 | |
| — | 6.00 | — | — | ||
| Supply of 1/2" RF Feeder Cable as per technical specification attached in Chapter - 2 of Part - II in tender document . INSPECTION BY CONSIGNEE | — | — | — | 10,57,274.16 | |
| — | 300.00 | — | — | ||
| Supply of N-Type Connectors for 1/2" RF Cable as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY CONSIGNEE | — | — | — | 65,784 | |
| — | 50.00 | — | — | ||
| Optical/CAT6 Patch cords with connectors as per OEM requirement- 10 Mtrs. INSPECTION BY CONSIGNEE | — | — | — | 1,41,474 | |
| — | 500.00 | — | — | ||
| Supply of N-Type Connectors for 7/8" Radiating cable as per OEM requirement or compatible with item No. 4 as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY CONSIGNEE. | — | — | — | 1,09,640 | |
| — | 10000.00 | — | — | ||
| Supply of Stainless Steel Clamps for 7/8" Radiating Cable anchored using SS Bolts and SS Anchor Fasteners (Stainless steel" shall be a Cr Ni-Mo alloy or Cr-Ni-Mo-Ti alloy, material No. 1.4404 or 1.4571 according to EN 10088 resp. 316 S 11 or 320 S 31 according BS) as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY RITES | — | — | — | 35,24,200 | |
| — | 3.00 | — | — | ||
| Supply of Voice Recording equipment as per RDSO RDSO/SPN/TC/038/2002 with latest Amendment/Revision . INSPECTED BY RDSO | — | — | — | 10,10,496.54 | |
| — | — | — | Specification | ||
| — | 15000.00 | — | — | ||
| Supply of Nylon Clamps for 7/8" Radiating Cable using Stainless Steel Self-Anchoring Expansion Bolts as per technical specification attached in Chapter - 2 of Part - II in tender document . INSPECTED BY RITES | — | — | — | 41,11,500 | |
| — | 300.00 | — | — | ||
| Supply of Jumper Cables 1 mtr in 1/2"SF Cable with N-N /DM NM terminations as per OEM of approved make as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY CONSIGNEE | — | — | — | 2,84,985 | |
| — | 160.00 | — | — | ||
| Supply of 2 way splitter for leaky cable connection/Adjustment as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY RDSO. | — | — | — | 21,12,716.8 | |
| — | 30.00 | — | — | ||
| Supply of 30 db coupler for coupling of Rf feeder cable as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY CONSIGNEE | — | — | — | 3,96,134.4 | |
| — | 20.00 | — | — | ||
| Supply of RF lighting and Surge Arrestor protection . INSPECTED BY CONSIGNEE | — | — | — | 1,50,895 | |
| — | 8.00 | — | — | ||
| "Supply of Log-Periodic Antenna in VHF Frequency Band as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY CONSIGNEE | — | — | — | 1,56,627.52 | |
| — | 50.00 | — | — | ||
| 10W Termination Load (PIM<=-150) for termination of leaky cable.as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY CONSIGNEE | — | — | — | 1,41,474 | |
| — | 2.00 | — | — | ||
| The system Architecture/Technical Design document conforming to the Functional, Technical and System requirements outlined in the technical specifications and documentation along with the project team/interfacing and client discussions will be created and the design document will be formall approval of Railways. (Block section is per master unit.) | — | — | — | 3,56,810.02 | |
| — | 6100.00 | — | — | ||
| Supply of Armoured LSZH Cat 6A S/FTP Cable complete broadly conforming to RDSO standard RDSO/SPN/TC/65/2019 Rev.5 or latest. INSPECTED BY CONSIGNEE | — | — | — | 96,868 | |
| — | 10000.00 | — | — | ||
| Supply of 3 core 2.5 Sq.mm multi strand copper conductor, of reputed make (Finolex/polycab/Havells or similar). . INSPECTED BY CONSIGNEE | — | — | — | 4,22,500 | |
| — | 1.00 | — | — | ||
| Supply of Emergency Call, Service Telephone and PA system Hardware controller, with all required accessories as per technical specification attached in Chapter - 2 of Part - II in tender document. The System should function as one network giving redundancy to server provided at other station Per Unit = Each Tunnel. INSPECTED BY RDSO | — | — | — | 45,08,007.84 | |
| — | 2.00 | — | — | ||
| Supply of Desktop Call Station, full IP based handset and microphone, functional keys as per technical specification attached in Chapter - 2 of Part - II in tender document etc all complete. INSPECTED BY RDSO | — | — | — | 2,10,374.6 | |
| — | 2.00 | — | — | ||
| Supply of Emergency Audio & Video call station with two buttons rugged industrial grade suitable for tunnel applications as per technical specification attached in Chapter - 2 of Part - II in tender document. INSPECTED BY RDSO" | — | — | — | 2,62,483.2 | |
| — | 200.00 | — | — | ||
| Supply of IP Horn Type PA Speaker, with mounting arrangement and all accessories etc all complete as per technical specifications attached in Chapter - 2 of Part - II in tender document. The material should be corrosion free. INSPECTED BY RDSO | — | — | — | 1,23,43,734 | |
| — | 7.00 | — | — | ||
| Supply of High power PA Amplifier 250 Watts/AC & 24 V DCoperation with 6 Mic & 2 Aux. Input of Ahuja make modelSSA- 250 M or equivalent. . MAKE : Hitone Boss or similar. INSPECTED BY CONSIGNEE | — | — | — | 97,447.42 | |
| — | 500.00 | — | — | ||
| Supply of Surge protection device (including all accessories) RJ45 POE- ODR (outdoor) Suitable for use with surveillance cameras, access points, and other Ethernet-equipped device.The device should be suitable for outdoor use. Module- JMV/RJ45 POE- ODR or similar. INSPECTED BY CONSIGNEE | — | — | — | 6,93,840 | |
| — | 3.00 | — | — | ||
| Supply of server rack front door glass with lock key and perforated metel door covered 19'' 42 U Racks of size Length-2200 mm X Width-800 mm X Depth-1000 mm, Make: WQ/Vero President/Rittal/APC/Saraswat or similar or better, complete with all fittings including DC Fans (48 V) -2 Nos, LED lights, seperator sheet/plate to keep testing equipments - 1 No and AC Power distribution panel (Vertical fitting ) with power sockets and fuse/MCB protection (minimum 12 Nos of 230V- 15A/5A. combined) and other accessories. Rack should have compatibility with all equipment conforming to EIA/ISO/EN standard, Manufacturer must certify that products are compied with EIA/IISO/EN/CEA/UL standards.INSPECTED BY CONSIGNEE. | — | — | — | 1,18,464.21 | |
| — | 15000.00 | — | — | ||
| Supply of 1 x 6 Sqmm (Red/Black/Green) multi strand copper power wire as per IS:694:2010 or latest, 84 conductor each dia 0.30 +/- 0.01 with insulation thickness of 0.8 mm and nominal conductor resistance of 3.3 ohms/km and test parameters as per RDSO Specn.No.IRS:S- 76/89 (Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge. . INSPECTED BY CONSIGNEE | — | — | — | 3,62,400 | |
| — | 40.00 | — | — | ||
| Supply of 6U, 19" covered Rack with (1) front side transparent door with lock arrangement(2) cable organizer (3) provision of one no. of power supply (each consists of 6 Nos x 15A/15A multipin sockets with ON/OFF switch and fuse arrangement) strip HCL or Rittel or APW or President od D-Link or Similar) INSPECTED BY CONSIGNEE | — | — | — | 1,63,856.4 | |
| — | 1.00 | — | — | ||
| Supply of PC WorkStation for Viewing, Monitoring and System Management as per RDSO Spec No.RDSO/SPN/TC/65/2021, Rev 6.0 or with latest Amdt. INSPECTED BY RDSO | — | — | — | 2,00,895.72 | |
| — | 32.00 | — | — | ||
| Supply of Power Backup provision for Master unit & Optical Remote unit as per RDSO specification No.RDSO/SPN/TC/109/2023 Ver 1.0 with latest amendment. . INSPECTED BY RDSO | — | — | — | 20,28,105.92 | |
| — | 30.00 | — | — | ||
| Supply & installation of 5 KVA On-Line UPS with isolation transformer suitable for single phase AC output, Floor Mounted Type with sealed maintenance free batteries complete one hour backup. (Attached DATA sheet) INSPECTED BY CONSIGNEE | — | — | — | 18,51,832.8 | |
| — | 40.00 | — | — | ||
| """Supply of 8 port Layer 2 managed network switches. 8 ports PoE L-2 switch of 10/100/1000 MBPS with 2 nos.10/100/1000 Base-T/SFP port with supply of 02 nos. SFP module and - 48V DC operated as per clause 13.0 of RDSO/SPN/TC/83/2020, Rev 2.1 or with latest Amdt 1.0 or latest. INSPECTED BY RITES | — | — | — | 5,32,236.8 | |
| — | 350.00 | — | — | ||
| Supply of Material,fabrication,and installation of frame & door for Horn, speaker,CCTV camera,6U/9U rack & other safety equipment. Size 0.7 meters(L)x0.45 meters(W)x0.45 meters (H) (Side Angle thickness 0.3 mm, Mesh ( 0.1 m x 0.1 m), Mesh rod gauge 0.3 mm) or as per site requirement. INSPECTED BY CONSIGNEE | — | — | — | 11,85,408 | |
| — | 50.00 | — | — | ||
| Supply of Material, fabrication, and installation of frame & door for SOS Phone & other safety equipment. Size 0.350 meters(L)x0.140 meters(W)x0.450 meters (H) (Side Angle thickness 0.3 mm, Mesh (0.1 m x 0.1 m) rod gauge 0.3 mm ) or as per site requirement. INSPECTED BY CONSIGNEE | — | — | — | 1,16,659 | |
| — | 30.00 | — | — | ||
| Supply of Material, fabrication, and installation of safety door for VHF Set Power supply unit with dimensions of 2.87 meter in height, 1.99 meter in width and length 0.60 meter ( Side Angle thickness 0.5 mm (Inside Mesh (0.1 m x 0.1 m), (rod gauge 0.8 mm) or as per site requirement. INSPECTED BY CONSIGNEE | — | — | — | 7,05,600 | |
| — | 60.00 | — | — | ||
| — | 1.00 | — | — | ||
| — | 80.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument-139.pdf
ATTACHMENT
Annexure and drawings
ATTACHMENT
Annexureanddrawings-Final.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .