Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹24.6 L+₹12,395.50 (0.51%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹25.0 L+₹56,330 (2.31%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹25.2 L+₹78,857.50 (3.23%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹27.9 L+₹3.5 L (14.3%)Rejected-Finance FLAT NO 2 AMEYA APARTMENT SHIV COLONY NEAR PANDAV NAGARI INDIRA NAGAR NASHIK 422009 | NASHIK | NASHIK | MAHARASHTRA | 422009 | L5 | Rejected-Finance Not lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2022_MES_572266_1
GE/NRC/8951/E8
Open Tender
Civil Works
Item Rate
210 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹60,000
Yes
9 Feb 2023
30 Dec 2022
30 Jan 2023
30 Dec 2022
28 Jan 2023
6 Jan 2023
Amount
Taking down shutters exc 1 Sqm but n exc 2Sqm complete all as specified and directed
Taking down shutters n exc 1 Sqm complete all as specified and directed
Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.
Taking down chowkat or frames with shutters (without taking off shutters from the frame) but n exc. 1.5 Sqm
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints
M&L for 2nd class hardwood exc 13 Sqcm and n exc 25 Sqcm Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed
S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed
S&F IInd class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.
M&L for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of new wooden surfaces all as specified and directed by EIC.
S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and directed
S&F Aluminium alloy anodised barrel tower bolts 200mm long complete all as specified and directed
S&F MS butt hinges 100mm size medium weight complete all as specified and directed
S&F aluminium alloy barrel tower bolt 150 mm long complete all as specified and directed
S&F 150 mm extruded aluminium alloy handels complete all as specified and directed
S&F 75 mm long medium weight, cold rolled mild steel Butt hinges. complete all as specified and directed
S&F 75 mm extruded aluminium alloy handels complete all as specified and directed
S&F in repairs 1st class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed
M&L for Washing, rubbing down and stopping of old preparation of old distempered surfaces of walls including cornices plaster and applying two coats of oil bound distemper on walls in patches all as specified and directed.
M&L for painting with one coat of synthetic enamel paint on old wooden/steel surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by EIC.
Supply & Fixing in repairs stainless steel curtain rails of 25mm dia metre stops, rollers etc all as specified and directed.
Supply & Fixing in repairs stainless steel brackets for curtain rod of 25mm dia metre stops, rollers etc all as specified and directed.
S&F 35 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed
S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed
S&F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed
S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), 75mm thick as in sub base all as specified and directed.
M&L fo Machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade laid over and including 30 mm thick stone dust cushion.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed
M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smooth including taking down old cement plaster complete all as specifed and directed
M&L for preparation of plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer prepatory to distemper on walls.
M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement including taking down old cement plaster complete all as specifed and directed
M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed
M&L for rendering 05 mm thick (1:3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement
M&L three coat of white wash including preparation of new surfaces on ceilings
Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed
M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc incl dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately
M&L for glazed ceramic tiles coloured size 450 x 300 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed
M&L for rendering 15mm thick in CM 1:3 as in backing coat plaster on surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed
M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed
NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 73,250.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
Kaushalya Buildcon
A V S Builders
Vishal Constructions
UNITED ENTERPRISES
M/S SAMEER SUBHASH PATANI
Bidder Name
Vishal Constructions
A V S Builders
M/S SAMEER SUBHASH PATANI
UNITED ENTERPRISES
L.K.R.TIWARI CONSTRUCTION
Kaushalya Buildcon
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .