Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹23.5 LAccepted-AOC | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹30.7 L+₹4.0 L (14.8%)Rejected-AOC | 2 | Rejected-AOC 2nd |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
PETTY REPAIR AND DAY TO DAY COMPREHENSIVE MAINTENANCE TO BANI CAMP VSB AND TECH AREA AT 12 BRD AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2022_MES_563612_2
GE/TKD-58/2022-23
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹500
GE AF TUGHLAKABAD
₹60,000
Yes
27 Jun 2023
27 Dec 2022
25 Jan 2023
27 Dec 2022
23 Jan 2023
27 Dec 2022
Amount
S&F in repair of existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-charge.
Labour only in adjustment of the float valve or ball valve or lever or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-charge.
S&F in repair of float valve of PTMT with polythene ball for 15mm dia pipe complete all as specified and directed by Engr-in-charge.
All as per above item No 3 but for 20 mm bore pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of polythene ball of existing 15mm dia Valve dia complete all as specified and directed by Engr-in-charge.
S&F in repair of polythene ball of existing 20mm dia Valve dia complete all as specified and directed by Engr-in-charge.
S&F in repair of 45cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge.
Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture , wall mixture, concealed etc of any description any size by changing washer/ jumper wall etc complete all as specified and directed by Engr-in-charge.
S&F in repair of brass face spindle of existing 15mm dia bore concealed stop cock complete all as specified and directed by Engr-in-charge.
S&F in repair of brass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basic mixture and wall mixture of any description complete all as specified and directed by Engr-in-charge.
S&F in repair of 32 mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all as specified and directed by Engr-in-charge.
S&F in repair of 40 mm waste coupling of PTMT (half or full threaded) Minimum weight 40mm-60gms complete all as specified and directed by Engr-in-charge.
S&F in repair of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified and directed by Engr-in-charge.
S&F in repair of 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.
Petty repairs low level flushing cisten any size/description for repair of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cisten functional complete all as specified and directed by Engr-in-charge.
Removal of air lock/blockage of water in G I and PPR Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.
Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.
Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.
S&F in replacement Sink with drainage board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460 mm, bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110mm bore) including flat iron claim for proper fixing complete all as specified and directed by Engr-in-charge.
All as per item No 22 above but refixing only including taking down existing old pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC (SWR) bends of 110mm dia complete all as specified and directed by Engr-in-charge. Make - Supereme /Kisan
Taking up or down PPR/GI tubing 15 mm bore pipe complete all as specified and directed by Engr-in-charge.
Taking up or down PPR/GI tubing 20 mm bore pipe complete all as specified and directed by Engr-in-charge.
S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.
All as per sl item No 27 above but for 20mm dia complete all as specified and directed by Engr-in-charge.
S&F in repair of 75 mm bore sand cast iron drain waste/vent pipes fixed to wall, floor jointed with cement joints incl dismantling of old cast iron drain,waste, vent pipe of any description complete all as specified and directed by Engr-in-charge.
S&F in repair of 100 mm bore sand cast iron drain waste/vent pipes fixed to walls or floor jointed with lead joints incl dismantling of old cast iron drain,waste, vent pipe of any description complete all as specified and directed by Engr-in-charge.
M&L for cast iron door bends of 75 mm dia complete all as specified and directed by Engr-in-charge.
M&L for cast iron door bends of 100 mm dia complete all as specified and directed by Engr-in-charge.
M&L for cast iron branch pieces, tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified and directed by Engr-in-charge.
M&L for cast iron branch pieces of 100 mm dia complete all as specified and directed by Engr-in-charge.
S&F in repair of 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-charge.
S&F in repair of vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repair of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge. Note: Pillar tap shall be measured and paid separately under respective item.
S&F in repair of PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.
S&F in repair of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.
S&F in repair of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.
S&F in repair of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repair of water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.
Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and directed by Engr-in-charge.
M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.
M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in cm (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in cm (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L for rendering 5mm thick in cm (1:3) on fair faces of ceiling surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engr-in-charge.
All as per item No 50 above but on ceiling complete all as specified and directed by Engr-in-charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC flush pipe of 32mm dia pipe for connecting low level flushing cisten inclulding jointing to WC complete all as specified and directed by Engr-in-charge.
Taking down and refixing of old steel tubing in new or old position (wall etc) including cleaning for refixing bore of pipe 15mm dia complete all as specified and directed by Engr-in-charge.
All as per Srl Item No 54 above but for 20mm bore of pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc of any size for 15mm bore GI (ISI marked) complete all as specified and directed by Engr-in-charge.
All as per Srl Item No 56 above but for 20mm GI fittings (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in repair of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge.
S&F in repair of ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge.
S&F in repair of 150 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair of 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair of mild steel presssed handle 150 mm long oval types stove enamelled black complete all as specified and directed by Engr-in-charge.
S&F in repair of 75mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge.
S&F in repair of single legged Alu floor door stopper 140mm long with alloy body and tongue anodised with hard drawn steel spring complete all as specified and directed by Engr-in-charge.
Easing of wooden door shutters/Almn door/PVC door shutter/Almn window (One unit shall comprising of one window/CB/Showcase/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc. complete all as specified and directed by Engr-in-charge.
M&L in replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrouoght for glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed by Engr-in-charge.
Taking down cement plaster in patches on brick work, racking out joints, hacking for dey scrubbing down with water etc complete and removing the spoil to a distance of not exceeding 100m & depositing where directed all as specified and M&L for 15 mm thick cement plaster in cement mortar (1:4) on brick work/concrete surface finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note: The area of patches should not be more than 3 Sqm.
S&F in repair of 3.00mm thick figured coloured glass pin head type & fixed with aluminum beads. The rates includes taking down of old glass from metal frame & refixing the beading, PVC packing complete of any type complete all as specified and directed by Engr-in-charge.
M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4) 20mm graded stone agg. & finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-charge. Note: The area of patches should not be more than 2.00 sqm each. The rates includes demolition of cement concrete.
S&F in repair of MS rat tail rod pattern spring including roller & roller plate complete fixed complete all as specified and directed by Engr-in-charge.
Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge. Note:- (i) One unit shall be comprising of one window irrespective of no of leaves/shutter. (ii) The work shall be carried out up to 12m height.
S&F in repair of pillar tap 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
All as per Sl item No 72 above but for PTMT 15mm dia pillar cock complete all as specified and directed by Engr-in-charge.
S&F in repair of bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repair complete all as specified and directed by Engr-in-charge.
S&F in repair of angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC Corner bracket golden colour suitable for drapery rod As per sample complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC knobs golden colour suitable ISI markedAs per sample complete all as specified and directed by Engr-in-charge.
S&F in repair of M S Bracket suitable for drapery rod with nuts & bolts. As per sample complete all as specified and directed by Engr-in-charge.
S&F in repair of Fancy alumimum powder coated Drapery rod 25mm dia fancy powder coated. As per sample complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system.The frame to be fixed with tank by 4 nos pvc nut bolts and arolite complete all as specified and directed by Engr-in-charge. Note: The cover to be provided for 500/1000 ltrs capacity.
S&F in repair of 100 mm butt hinges extruded brass, with mild steel hing pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-charge.
S&F in repair of 75mm butt hinges extruded brass, with mild steel hing pin, bright polished and fixed, type B-12 complete all as specified and directed by Engr-in-charge.
S&F in repair of mortice lock brass 4 levers vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-charge.
S&F in repair of MS baby lock 100 mm long As per sample complete all as specified and directed by Engr-in-charge.
S&F in repair of Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.
labour only fixing of soap dish/towel rod/towel rack/glass shelf/looking mirror/towel ring/plate rack/ etc complete all as specified and directed by Engr-in-charge.
S&F in repair colour venition blind 100mm width of strip complete all as specified and directed by Engr-in-charge.
S&F in repair of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of Basin mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
Supply only Birla white cement complete all as specified and directed by Engr-in-charge.
S&F in repair of black glass, 5.5mm thick and glazing complete with beads fixed with brass screws including hacking out glass from wooden/ms/Aluminium section complete all as specified and directed by Engr-in-charge.
S&F in repair of Mirror Cabinet Multi utility (355x 455mm) complete all as specified and directed by Engr-in-charge.
S&F in repair of 15mm dia bore gun metal ball valve complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC PTMT stop cock 15mm dia pipe with crutch or butterfly handle screwed iron pipe or for brass ferrule complete with check nuts 15mm complete all as specified and directed by Engr-in-charge.
S&F in repair of stainless steel kitchen plate rack of size 24" x30" on walls, complete all as specified and directed by Engr-in-charge.
S&F in repair of Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
S&F in repairs of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-charge.
S&F in repair of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheets complete all as specified and directed by Engr-in-charge.
S&F in repairs of corner glass shelf of 12" complete all as specified and directed by Engr-in-charge.
M&L for coloured chequered tile glass moulded glossy finished of size 300x300x25mm thick set and jointed in neat cement slurry and pointed with white cement mixed with pigments including and over 20mm thick screed bed in cement mortar (1:4) including and over 75mm thick PCC (1:3:6) type C2 by using 20mm gradded stone aggregate as in sub base complete all as specified and directed by Engr-in-charge. Note: The rates includes dismantling of old tile/cement concrete surface and removing dismantling material out of defence land.
M&L glazed ceramic colour tile 300mmx200mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4) complete in patches n.exc 3 sqm each including dismantling of skirting (terrezo/PCC/Tiles of any description) complete all as specified and directed by Engr-in-charge.
S&F glazed ceramic (non skid) joint free edge cut coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400mmx400mmx8mm thick ) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete in patches n.exc 3 sqm each including dismantling/demollition floor/tile (terrezo/ PCC/Tiles of any description) complete all as specified and directed by Engr-in-charge.
S&F in repair of brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.
S&F in repairs of soap dish brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.
M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.
S&F in repair of false ceiling of approved (ISI marked) make with 4mm thick HPS board fixed to galvanised iron steel angled grid 600x600mm size suspended system fixed to MS framed work of approved make and section as specified in SSR Part I with suitable hook/fasteners and GI/almn suspenders not less than 3mm dia @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag and dismantling old ceiling board with frame complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete in fround floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engr-in-charge.
M&L for 75 mm thick PCC (1:4:8) type D2 by using 40mm graded aggregate fininshing the concrete surface even and fair complete all as specified and directed by Engr-in-charge.
M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.
M&L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.
M&L for precast machine pressed concrete interlocking pave blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness, M 35 grade. wirh grey cement and pigment complete all as specified and directed by Engr-in-charge.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engr-in-charge.
M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.
S&F aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) doors shutters aluminium saction weighing not less than 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engr-in-charge.
S&F aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) windows and ventilator shutters, with aluminium grill, side hung type, without sash bars aluminium saction weighing not less than 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engr-in-charge.
S&F in repair of double action floor spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge.
S&F door seal of aluminium for doors of aluminium and wooden complete all as specified and directed by Engr-in-charge.
Note for complete work: One plumber with one helper, one carpenter with one helper and one mason with helper (minimum 6 person) shall be deployed by the contractor and they shall be present on all working days from 0830 hrs to 1700 hrs for attending the complaints. The persons will be detailed by JE/Engineer-in-charge concerned every morning for attending complaints on daily basis.
M/s R P Enterprises
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .