For required places construction of brick work,plastering,coloring,water proofing,coping,Dismantaling, P.O.P, Rain water Harvesting for Bhusawal Municipal Council

Item No.01 : - Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. DSR Page No./ Item No.46.09

Item No. 02 :- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. DSR Page No./ Item No.46.19

Item No. 03 :- Conveying materials obtained from road cutting inluding all lifts,laying in layers of 20cm.to30cm.breaking clods,dressing to the required lines,curves,grades and section,watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. SSR2020-23 Page No./Item no 2.26

Item No. 04 :- Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with natural sand) DSR Page No./ Item No. 11.04

Item No.05 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete DSR Page No./ Item No.27.13

Item No. 06 :- Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm DSR Page No./ Item No.39.56

Item No. 7 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. DSR Page No./ Item No.39.09

Item No. 8 Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjag, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken ) DSR Page No./ Item No.26.33

Item No. 9 Providing sand faced plaster extemally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. DSR Page No./ Item No.32.11

Item No. 10 Providing intemal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. DSR Page No] Item No.32.04 Spec No. : Bd. L.2 Page No. 368