CERTAIN REPAIRS AND MAINTENANCE OF JCO ORS MD ACCN AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

M&L for petty repairs to easing of door shutters, window shutters, wooden cupboard shutters, including fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

M&L for petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, shower, concealed stop cock, low level flushing cistern, cPVC/GI pipe fittings including replacing and providing of good quality rubber washer check nuts plunges, taflon tape, M-seal, brass spindles (specific type), GI/ brass/CPVC fittings etc or any other minor accessories/ repairs to make the system functional and leak proof, ensure smooth water supply without any wastage and stop water leakage complete all as specified and directed.

S&F of 3mm thick plain sheet glass fixed with oil putty, ordinary quality, n.exc. 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

S&F of 3mm thick figured glass with oil putty, ordinary quality, n.exc. 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

M&L for granite 18-20 mm thick of approved colour and texture (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite including dismantling of old stone slab complete all as specified and directed.

M&L for 20-25mm thick machine cut, single piece kota stone slab in step and riser with anti-skid thread marking as required fixed over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry including rubbing and mirror polishing including dismantling of old stone slab complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab in flooring and skirting over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry including rubbing and mirror polishing and dismantling of old stone slab complete all as specified and directed.

M&L for light shade vitrified ceramic tiles of approved shade and design, area of each tiles n.exc 0.36 Sqm, as in floors and skirtng, etc. set and jointed in neat cement slurry and pointed with white cement including 15mm thick screed bed in CM (1:6) including dismantling of old tiling fixed in any mortar complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.11sqm but not exc 0.18 sqm) in floors and skirting set and jointed in neat cement slurry over screed bed 15cm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed.

M&L for glazed ceramic colour tiles with matching highlighter in vertical surfaces of size not less than 450x300 x 7-8mm thick set and jointed in neat cement slurry fixed over and including 10mm thick rendering in CM (1:4) as in backing coat and pointed in white tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below/above ground level) including floor finishes complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-1 using (20mm graded stone aggregate) 75mm thick as in plinth protection/path etc finished fair and even laid in bays n.exc 2m in length and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen mastic 1:3 complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete to be laid in required slope complete all as specified and directed.

S&F of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and fixing including dismantling of old steel doors/gates etc complete all as specified and directed.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of red oxide, zinc chrome primer complete all as specified and directed.

S&F of GI tubing of dia 15 mm dia 'medium weight' and all fittings on walls/ ceilings or laying in floors including taking down old water tubing fixed in any positions complete all as specified and directed.

S&F of GI tubing of dia 20 mm dia 'medium weight' and all fittings on walls / ceilings or laying in floors including taking down old water tubing fixed in any positions complete all as specified and directed.

Cutting channels, grooves or rebates n.exc 15cm girth, and trimming surface complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron or cpvc pipe and fixed complete all as specified and directed.

S&F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tank 500 ltrs capacity cylindrical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I including dismantling of old broken water storage tank complete all as specified and directed.

S&F in repairs PVC water tank cover (black/white) suitable for size 250 ltr to 500 ltr capacity etc complete all as specified and directed.

S&F in repairs 20mm ball (float) valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed (minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs for vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm PTMT waste coupling and 32mm corrugated waste pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified directed.

S&F in repairs vitreous china squatting pan 'Orissa pattern', size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and directed.

S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink length not less than 80 `cm upto floor trap complete all as specified and directed.

S&F in repairs 10 ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with 32 mm dia PVC flush pipe complete all as specified and directed.

S&F in repairs fancy type, 15 mm bore, chrominium plated, Pillar cock tall height, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, complete all as specified and directed.

S&F in repairs 15mm bore, fancy type, chrominium plated, bib tap, long body, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs chrominium plated, two way bib tap 15mm dia complete all as specified and directed.

S&F in repairs 15mm dia chrominium plated, stop valve/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 15 mm bore, chrominium plated, concealed, stop valves fancy type with long shank and cup, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, complete all as specified and directed.

S&F in repairs chrominium plated, shower rose with swivel joint of 125mm size complete all as specified and directed.

S&F in repairs chrominium plated, SS Soap dish premium quality, fixed to wall with plugs and screws complete all as specified and directed.

S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified and directed.

S&F in repairs chrominium plated, Health faucet (ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs brass chromium plated kitchen sink waste coupling comperising of four parts chrominium plated, brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel, towel ring fixed with and including SS screws and wooden/plastic plug complete all as specified and directed.

S&F in repairs chrominium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs glass shelf with chrominium plated bracket 55cm (min) long including necessary fixing screws and PVC rawl plugs complete all as specified and directed.

S&F in repairs 5mm thick corner glass shelf (CP bracket) of size not less than 225x 225mm with SS railing fixed with SS screws and PVC rawl plug complete all as specified and directed.

Taking down and refixing shutters in same opening after adjusting the size, of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

M&L for pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed

M&L for cement concrete 1:3:6, type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including plastering, painting and finishing the surfaces to match with existing surface complete all as specified and directed.

S&F of 35mm thick second class hard wood, factory made, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium density, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991 complete all as specified and directed.

S&F of 35mm thick second class hard wood, factory made glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24(a).

S&F of 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F of solid PVC door frame (approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed.

S&F of factory made, solid panel PVC door shutter (approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges and necessary SS screws shall be paid separately.

Supply and fixed of galvanised mild steel wire clothes 0.63 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed.

S&F of 100mm size, butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and directed.

S&F of aluminum tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F of 150 mm size extruded aluminium alloy handles, fabricated type, anodised handles complete all as specified and directed.

S&F of 300mm size, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of double body floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters overall length of cover plate 140mm complete all as specified and directed.

M&L for preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and directed.

S&F in repairs aluminum tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised handles complete all as specified and directed.

S&F in repairs 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs double body floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters overall length of cover plate 140mm complete all as specified and directed.

S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete all as specified and directed.

S&F of 16-17mm thick prelaminated particle board, interior grade, but prelaminated both sides with decorative choice laminations, fixed to frame work with hinges including dismantling of old boarding of any description complete all as specified and directed.

M&L for extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F of 2nd class hard wood plain fillet square, rectangular and triangluar in section, clean swan, secured with nails, sectional area exc 13 but n.exc 25 sqcm complete all as specified and directed.

S&F of 100mm size, hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F of 30mm width of flap, continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F of magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved sample complete all as specified and directed.

S&F in repairs SS kitchen plate rack made out of 1mm thick sheet of type SS 304 grade of size min 750x600x250mm of best quality of approved make complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store complete all as specified and directed. Note:- Measured overall as fixed along the centre line over fittings and accessories.

S&F of 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor or fixed to walls complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors or fixed to walls complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door complete all as specified and directed.

S&F of 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door complete all as specified and directed.

S&F of 75 mm bore PVC (SWR), bend in any radius complete all as specified and directed.

S&F of 110mm bore PVC (SWR), bend in any radius complete all as specified and directed.

S&F of 75 mm bore PVC (SWR), coupler in any radius complete all as specified and directed.

S&F of 110mm bore PVC (SWR), coupler in any radius complete all as specified and directed.

S&F in repairs PVC(SWR) floor trap, plain with grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete of sunken floors including removing debrish outside MD land complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sqm mixed with WPC @ 3% by weight of cement as per manufacturer's instruction for fill all hole and crack of sunken floor including and testing for water tightness for24 hours complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for PCC(1:1.5:3) type A-0 using 12.5 mm graded stone aggregate using integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout complete all as sspecified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for 15 mm thick rendering on vertical sides and top surface in CM (1:3) using water proofing compound as per manufacturer instructions in sunken portion finished even and smooth without using extra cemenrt complete all as specified and directed. Notes: (i) Plaster shall be dome over PCC coving when the same is green. (ii) Water proofing compound will be measured and paid separately.

M&L for applying two coats of Dr. Fixit krystalline water proofing coating compound of Make: Pidilite or of equivalent in other make as approved shall be applied after laying sewage/ plumbing pipes with fixtures in position in sunken floor complete all as specified and directed. Note : Water tightness testing should be done after applying water proofing compound, by ponding water for 72 hours & rectify defects.

M&L for filling the sunken floor with PCC ( 1:5:10) type E-2 using brick aggregate over the treated surface.

M&L for providing spouts of 50mm dia GI pipe light grade n exc 1 m and projecting 450mm clear of face outer wall with PVC mosquito proof cap on inner face of pipe shall be provided to drain out seepage water, if any.

Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 250 lt but n.exc 500 lt each and from mouths of circulating pipes etc of service water/loft tanks in/over roof buildings at different locations of capacities as under: Note: 1. The contractor will write date of cleaning and next due date of cleaning on Tank as directed by the Engr-in-Charge. 2. At the time of cleaning disconnected pipes/fittings shall be reconnected as per existing to make it leak proof complete all as specified and directed.

M&L for 10 mm thick rendering in cement plaster 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in two layers (10mm in cement mortar 1:6 as backing coat, 5mm in cement mortar 1:4 finish coat with WPC) on fair faces of bricks or concrete surface finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. Note:- WPC shall be measured and paid seperately.

M&L for 5mm thick rendering in cement plaster 1:3 as in ceiling on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement including taking down old plaster and raking out joints complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of 1 mm thick complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces as in ceilings and applying three coats of white wash complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 10mm thick cement plaster over PCC in CM 1:4 finished even and smooth (without using extra cement) and using WPC of approved make per manufacturers instruction including taking down old plaster from roof complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for preparation and cleaning of newly plastered surface and applying two coat of Dr fixit Roof seal classic as per following direction:- 1. Marking of 2x2 m area on roof surface. 2. Apply 1st coat on ready surface in one direction using 1.5 ltr/ 4 sqm area 3. Apply 2nd coat using 1.0 ltr/ 4 sqm after 12 hrs in perpendicular direction of 1st coat application 4. Removal of all unwanted material and debris outside MD land.

M&L for priming surfaces with applying evenly a coat of hot industrial bitumen VG-10 grade @ 1.20 Kg/Sqm including cleaning of newly plastered surface complete all as specified and directed.

M&L for applying APP based polymeric membrane minimum weighing not less 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M&L for preparation of newly fixed APP surfaces and evenly applying with roller brush two coat of aluminum paint complete all as specified and directed.

S&F of heat resistant terrace tiles (300 mm x 300 mm x 10 mm minimum) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps, copings, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including neccessary formwork complete all as specified and directed.

M&L for preparing of old decorates surfaces wall and applying Dr. Fixit rain coat of make Pidilite or equivalent make in following steps as appended below:- (1) Existing substrates cleaned and removed all scale dirt, algea moss, fungal growth with using mechanical wall sander (having mechanical vaccum mechanism) with RPM not less than 1500, sanding pad of 80 grit of dia 7"/ 9"on walls (external surface). All loose plaster will be repaired with polymer modified mortar using Dr. Fixit pidicrete URP and norrow cracks upto 5mm shall be repaired with crack X-paste and the larger cracks upto 10mm with Dr. fixit crack-X shrink free. The surface shall be made dry completely for upto 4-6 days for application of primer. (2) Applying one coat primer Dr. Fixit prime seal diluted with 2:1 with water (prime seal:water) maintaining spreading rate @ 8 to 10 sqm / ltr complete all as specified and directed. (3) Applying two coats of Dr. Fixit raincoat without any dilution for coverage 3.5 sqm/ltr and second coat of Dr. fixit rain coat without any dilution for coverage 7 sqm/ltr complete all as specified and directed. Note :- (i) Second coat must be applied after of 6 to 8 hours application of first coat. (ii) The application of Dr Fixit raincoat must be avoided at temperature below 10˚C more than 35˚C and in direct sunlight.

M&L for preparation of old decorated plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying one coat of wall care white putty 1mm thick over two coats of oil bound distemper including a coat of compatible wall priming paint complete all as specified and as directed.

M&L for preparing of old distempered surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and welding of damaged parts of MS gates, windows, grills i.e. handle, sliding bolts, tower bolts, hinges, stoppers and alike complete all as specified and directed.

Welding in repairs of gates, windows and other MS items size of welding exc 2.5cm but n.exc 5cm in length (thickness of metal n.exc 6mm) complete all as specified and directed.

S&F of roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A including dismantling of old structural steel complete all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (AZ 150) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (AZ 150) of approved colour having tensile strength of 550 Mpa in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling of old sheets fixed at any location complete all as specified and directed.

S&F of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to walls complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in post hole complete all as specified and directed.

M&L for Cement concrete 100 mm thick type D- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all all as specified and directed

Taking out settled Bricks/ Interlocking paver blocks any thickness (laid flat or on edge) in path, floors, channels, kerbs, aprons, etc. (each layer) laid dry and refixing at same location over sand cushioing complete all as specified and directed.

S&F of Providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 23-25mm thick, set, jointed and pointed in neat cement slurry in floors including over 20mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L for heavy duty Parking /outdoor tiles minimum 10mm thick (square/rectangular) area of each tiles not exc 0.11 sqm, in floors set and jointed in neat cement slurry and fixed over 15mm thick screed bed in CM 1:6 incl demolition of old tiles complete all as specified and directed.

M&L for brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of old brick masonary complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 45-50mm thick sand stone slab in as in gully trap/ manholes cover stone etc set and pointed in CM 1:4 complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 52343.00

City buildcom builders & devlopers (BID ID -3364915)

AJIT ENTERPRISES (BID ID -3372715)

SHIV SHANKAR MISHRA (BID ID -3364876)