Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹30.7 L+₹1.4 L (4.87%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest. |
| Sl No | Description | Qty | Unit | M/s Ranaji Construction Co L1 | Tulsi Enterprises L2 |
|---|---|---|---|---|---|
| 1.00 | Cleaning of semi underground sump of capacity 2,50,000 gallons capacity two compartment at pump house by the following process complete all as specified:-
(a) Draining out water and evacuation of internal surfaces including floor and ceiling with mechanical pressure machine by applying solution of H2 02 (Hydrogen peroxide) all as directed by Engr-in-charge
(b) Dislodging the dirt layers with high-speed water jet including scrapping the surface with wire brush and draining out the sludge water.
(c) Cleaning the internal surfaces complete with Mechanical Scrubber and washing the surfaces with high-pressure water jet.
(d) Filling the chambers with clear water and washing out prior to refill after complete process. | 2 | Each Job | 15,000 ₹30,000 | 14,000 ₹28,000 Lowest |
| 2.00 | All as per Srl item No 01 here in before but capacity of Semi under Ground Sump 1,00,000 Gallons in two compartment | 3 | Each Job | 10,000 ₹30,000 Lowest | 10,000 ₹30,000 Lowest |
| 3.00 | All as per Srl item No 01 here in before but capacity of Semi under Ground Sump 50,000 Gallons in three compartment | 3 | Each Job | 6,000 ₹18,000 Lowest | 8,000 ₹24,000 |
| 4.00 | All as per Srl item No 01 here in before but capacity of Semi under Ground Sump 25,000 Gallons | 1 | Each Job | 5,000 ₹5,000 Lowest | 7,500 ₹7,500 |
| 5.00 | M & L for Cleaning of Over head water reservoir of capacity 75,000 gallons including staging/scaffolding up to 21 M height by the following process complete all as specified:-
(a) Draining out water and evacuation of internal surfaces including floor and ceiling with mechanical pressure machine by applying solution of H2 02 (Hydrogen peroxide) all as directed by Engr-in-charge
(b) Dislodging the dirt layers with high-speed water jet including scrapping the surface with wire brush and draining out the sludge water.
(c) Cleaning the internal surfaces complete with Mechanical Scrubber and washing the surfaces with high-pressure water jet.
(d) Filling the chambers with clear water and washing out prior to refill after complete process. | 1 | Each Job | 5,000 ₹5,000 Lowest | 6,000 ₹6,000 |
| 6.00 | All as per Srl item No 05 here in before but Over Head reservoir of capacity 50,000 Gallons
(Note for Srl Item No 01 to 06 here in before : (i) The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc.(ii) The unit rate quoted deemed to be include all safety precautions which shall be taken while working on RCC over head tank / underground sump during execution of the job.(iii) Lighting arrangements if required to be provided by the contractor temporarily at his own arrangements.(iv) Contractor will not be allowed more than one day to do the work inside the each OH Tank / UG sump to prevent interruption of water supply to the users. (v) The details of tanks like date of cleaning, capacity of tanks etc shall be written on the out side of the tank with synthetic enamel white paint on black back ground all as specified and directed by Engr-in-Charge (vi) The unit rate quoted deemed to be including stagig/scaffolding up to 21 m height for over head reservoir. | 2 | Each Job | 5,000 ₹10,000 Lowest | 5,000 ₹10,000 Lowest |
| 7.00Dismantling the power supply of electric motor 3 phase, any type including dismantling from pump and taking to workshop with necessary transportation and opening the complete motor and rewinding the rotor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of following capacity including painting and marking MES/SM No complete all as specified. | |||||
| 7.01 | (a) Capacity 50 HP electric motor any type. | 1 | Each Job | 20,000 ₹20,000 | 15,000 ₹15,000 Lowest |
| 7.02 | (b) Capacity 30 HP electric motor any type. | 1 | Each Job | 15,000 ₹15,000 | 12,000 ₹12,000 Lowest |
| 7.03 | (c) Capacity 7.5/10HP electric motor any type. | 2 | Each Job | 8,500 ₹17,000 | 8,000 ₹16,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Jul 2025, 6:00 pmClosed
GE Bharatpur
GE Bharatpur
REPAIR REPLACEMENT OF UNSERVICEABLE PUMP MOTOR RO PLANTS CONTROL VALVES CLEANING OF OH TANKS UG SUMPS INCLUDING DISINFECTANT CHEMICALS AND ALLIED SERVICES UNDER GE BHARTPUR
2025_MES_712891_1
8478/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE Bharatpur
₹90,000
Yes
23 Aug 2025
6 Jun 2025
9 Jul 2025
6 Jun 2025
7 Jul 2025
21 Jun 2025
6 Jun 2025 - 20 Jun 2025
Amount
Cleaning of semi underground sump of capacity 2,50,000 gallons capacity two compartment at pump house by the following process complete all as specified:- (a) Draining out water and evacuation of internal surfaces including floor and ceiling with mechanical pressure machine by applying solution of H2 02 (Hydrogen peroxide) all as directed by Engr-in-charge (b) Dislodging the dirt layers with high-speed water jet including scrapping the surface with wire brush and draining out the sludge water. (c) Cleaning the internal surfaces complete with Mechanical Scrubber and washing the surfaces with high-pressure water jet. (d) Filling the chambers with clear water and washing out prior to refill after complete process.
All as per Srl item No 01 here in before but capacity of Semi under Ground Sump 1,00,000 Gallons in two compartment
All as per Srl item No 01 here in before but capacity of Semi under Ground Sump 50,000 Gallons in three compartment
All as per Srl item No 01 here in before but capacity of Semi under Ground Sump 25,000 Gallons
M & L for Cleaning of Over head water reservoir of capacity 75,000 gallons including staging/scaffolding up to 21 M height by the following process complete all as specified:- (a) Draining out water and evacuation of internal surfaces including floor and ceiling with mechanical pressure machine by applying solution of H2 02 (Hydrogen peroxide) all as directed by Engr-in-charge (b) Dislodging the dirt layers with high-speed water jet including scrapping the surface with wire brush and draining out the sludge water. (c) Cleaning the internal surfaces complete with Mechanical Scrubber and washing the surfaces with high-pressure water jet. (d) Filling the chambers with clear water and washing out prior to refill after complete process.
All as per Srl item No 05 here in before but Over Head reservoir of capacity 50,000 Gallons (Note for Srl Item No 01 to 06 here in before : (i) The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc.(ii) The unit rate quoted deemed to be include all safety precautions which shall be taken while working on RCC over head tank / underground sump during execution of the job.(iii) Lighting arrangements if required to be provided by the contractor temporarily at his own arrangements.(iv) Contractor will not be allowed more than one day to do the work inside the each OH Tank / UG sump to prevent interruption of water supply to the users. (v) The details of tanks like date of cleaning, capacity of tanks etc shall be written on the out side of the tank with synthetic enamel white paint on black back ground all as specified and directed by Engr-in-Charge (vi) The unit rate quoted deemed to be including stagig/scaffolding up to 21 m height for over head reservoir.
Dismantling the power supply of electric motor 3 phase, any type including dismantling from pump and taking to workshop with necessary transportation and opening the complete motor and rewinding the rotor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of following capacity including painting and marking MES/SM No complete all as specified.
(a) Capacity 50 HP electric motor any type.
(b) Capacity 30 HP electric motor any type.
(c) Capacity 7.5/10HP electric motor any type.
(d) Capacity 5 HP electric motor any type.
(e) Capacity upto 03 HP electric motor any type.
Dismantling centrifugal pumping set of 50HP capacity DSM after disconnecting electric supply complete to carry out the repair/replacement of UNSV/worn out spare parts, nuts bolts, washer etc and re-assembling the pump sets on its original position and testing for its proper functioning.Note : Spare parts for repairing and making functional shall be measured and paid separately against respective items.
(a) Supply only coupling CI (set of 02 Nos).
(b) Supply only bearing DE/NDE for 50 HP pump set.
(c) Supply only impeller CI suitable for 50 HP pump set
(d) Supply only impeller ring suitable for 50 HP pump set
(e) Supply only rubber bush tapper/barret type ISI marked.
(f) Supply only shaft for pump stainless steel.
(g) Supply only shaft GM sleeves for pumps.
(h) Supply only bearing housing.
(i) Supply only key for impeller MS.
(j) Supply only vent valve brass.
Dismantling centrifugal pumping set of 30 HP capacity DSM after disconnecting electric supply complete to carry out the repair/replacement of UNSV/worn out spare parts, nuts bolts, washer etc and re-assembling the pump sets on its original position and testing for its proper functioning complete all as specified. Note : Spare parts for repairing and making functional shall be measured and paid separately against respective items.
(a) Supply only coupling CI (set of 02 Nos).
(b) Supply only bearing DE/NDE for 30 HP pump set.
(c) Supply only impeller CI suitable for 30 HP pump set
(d) Supply only impeller ring suitable for 30 HP pump set
(e) Supply only rubber bush tapper/barret type ISI marked.
(f) Supply only shaft for pump stainless steel.
(g) Supply only shaft GM sleeves for pumps.
(h) Supply only bearing housing.
(i) Supply only key for impeller MS.
(j) Supply only vent valve brass.
Dismantling centrifugal monoblock pumping set of 10 HP capacity after disconnecting electric supply complete to carry out the repair/replacement of UNSV/worn out spare parts, nuts bolts, washer etc and re-assembling the pump sets on its original position and testing for its proper functioning complete all as specified. Note : Spare parts for repairing and making functional shall be measured and paid separately against respective items.
(a) Supply only bearing DE/NDE for 10 HP pump set.
(b) Supply only impeller CI suitable for 10 HP pump set
(c) Supply only rubber bush tapper/barret type ISI marked.
(d) Supply only shaft for pump stainless steel.
(e) Supply only shaft sleeves for pumps.
(f) Supply only bearing housing.
(g) Supply only key for impeller MS.
(i) Supply only vent valve brass.
(j) Supply only mechnical seal
Dismantling centrifugal monoblock pumping set of 05 HP capacity after disconnecting electric supply complete to carry out the repair/replacement of UNSV/worn out spare parts, nuts bolts, washer etc and re-assembling the pump sets on its original position and testing for its proper functioning complete all as specified. Note : Spare parts for repairing and making functional shall be measured and paid separately against respective items.
(a) Supply only bearing DE/NDE for 05 HP pump set.
(b) Supply only impeller CI suitable for 05 HP pump set
(c) Supply only shaft for pump stainless steel.
(d) Supply only shaft sleeves for pumps.
(e) Supply only key for impeller MS.
(f) Supply only vent valve brass.
(g) Supply only mechnical seal
Taking out submersible pumping set of any capacity including suction pipe of any length and any dia from base well of any dia and lowering the same after necessary repair including water supply and electric supply connection and including transportation from site to work shop & testing complete all as specified. Note : Repairing of pump set will be measured and paid separetely.
Supply and fix spare parts for submersible pump sets capacity up to15 HP as under :- (a) Shaft bush.
(b) Coupling
(c) Thrust plate.
(d) Neck ring.
(e) Impeller distance bush.
(f) Impeller key.
(g) Impeller.
(h) Thrust bearing.
(j) Bush Stainless steel for impeller.
(k) Bush GM for Rotter.
(l) Shaft stainless steel for pump
(m) Guide/distance bush GM.
(n) Nipple stainless steel flange type for NRV
(o) Sand guard.
Taking out the unseviseable CI pipe lines including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead and cleaning the pipes internal/external for reuse the following bore of pipes:-
(a) 100 mm bore
(b) 150 mm bore
(c) 250 mm bore
Refixing and laying only CI/DI pipe with spigot end socketed any class in available length obtained from item No.13 tested complete in trenches all as specified for the following bore of pipe:-
(a) 100 mm bore
(b) 150 mm bore
(c) 250 mm bore
Supply, laying in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 standard length of K-7 specification complete including necessaary rubber gasket joints complete of the following sizes : Note :- (i) Excavation and earth work will be measured and paid separately. (ii) Rubber gasket joints shall be deemed to be included in quoted rate.
(a) 100 mm bore
(b) 150 mm bore
(c) 250 mm bore
S&F in replacement of sluice valve and class PN-I with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified.
(a) 100 mm bore
(b) 150 mm dia bore
(c) 250 mm dia bore
M & L for Ductile Iron bends, tapers, Tee pieces, cross, collers, caps and plugs any type, radius & angle for pipes upto 250 mm bore all as per ISI marked complete all as specified.
Excavation in trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out / laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified.
Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified.
Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr above starting point complete all as specified.
M&L of PCC 1:2:4 type B-2, using 40mm grade stone aggregate filling and mass concrete, road finishing, trust/protection blocks for pipe lines/ installation damaged PCC paths concrete all as specified.
Dismantling the submersible motor from pump set and rewinding the motor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of capacity 15/12.5 HP including painting complete all as specified.
Dismantling the submersible motor from pump set and rewinding the motor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of capacity 5.0/7.5 HP including painting complete all as specified.
Dismantling the submersible motor from pump set and rewinding the motor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of capacity 2.0/3.0 HP including painting complete all as specified.
Supply and laying of High density poly- ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 for column pipe to bore well of size 75 mm dia including necessary arrangements for coupling arrangement on top and bottom of HDPE pipe with pump and delivery pipe complete all as specified.
S&F in replacement of PVC insulated submerssible cable water proof flate type 3 core with standed copper conductor cable, 6 Sqmm, 1100 volts grade including cable lugs/joints, connection to submerssible motor and other end to aluminium armoured cable including jointing complete all as specified.
S&F in repairs fully automatic star Delta starters in sheet metal enclouser suitable for 12.5 to 15 HP capacity, 415V, 50Hz, complete all as specified.
S&F in repairs pressure gauge, 100 mm size, fitted on delivery side of pump set , including dismantling the old one complete all as specified.
Servicing of RO filteration plant of capacity 5000 LPH by techinicial expert including dismantling and checking of prefilter and RO memberane and cleaning of all the filter and RO membrane by using suitable chemical and checking of all booster pump sets and cleaning all the electrical and pump accessories replace with water seals and pipe line leakage as required and replacement of defective parts complete all as specified. Note : - supply of various parts of RO plant will be measured and paid separetely.
(a) Supply only micro catridge Filter (5 micron) for 5000 LPH capacity. Make : ION Exchange india ltd or equivelents.
(b) Supply only RO plant INDION New generation Multigrade filter (NGMF) media for 5000 LPH capacity.ION Exchange india ltd or equivelents.
(c) Supply only RO plant INDION New generation Multigrade filter (NGMF) Top Stunner 5000 LPH capacity. Make : - ION Exchange india ltd or equivelents.
(d) Supply only RO plant Low pressure Switch for 5000 LPH capacity Make : - ION Exchange india ltd or equivelents.
(e) Supply only RO plant Antiscalant 8211 chemical for 5000 LPH capacity make : ION Exchange india ltd or equivelents. Make : - ION Exchange india ltd or equivelents.
(f) supply only RO mebrane HM 8040/4040 BW- 400 suitable for 5000 LPH capacity. Make : ION Exchange india ltd or equivelents.
(g) Supply only Multiport valve of filter for Ro plant 5000 LPH capacity. Make : ION Exchange india ltd or equivelents.
Taking water sample in suitable bottle for testing of bio and chemical each test as per ISO 10500 for the following locations as and when required all as specified.
(a) Semi underground sump 100000 Glns capacity at Mallah pump house
(b) Overhead reservoir of 50000 Glns capacity at sewar Fort
(c) Semi underground sump 50000 Glns capacity at KLP Area
(d) Perimeter area Tube Well No 06/07
(e) Semi underground sump 100000 Glns capacity at Madoni hills
(f) Overhead reservoir of 75000 Glns capacity at kanjoli line
(g) Semi underground sump 50000 Glns capacity at MES IB Pump house
Supply only Water treatment Calcium hypo Chloride 65%-70% chlorine content (calcium based granular disinfectant for water treatment, packed in 45 kg drum complete all as specified.
Servicing of RO filteration plant of capacity 500 LPH by techinicial expert including dismantling and checking of prefilter and RO memberane and cleaning of all the filter and RO membrane by using suitable chemical and replace if found unserviceable and checking of all booster pump sets and cleaning all the electrical and pump accessories replace with water seals and pipe line leakage as required and replacement of defective part complete all as specified. Note : - Supply of various parts of RO plant will be measured and paid separetely.
(a) Supply only micro catridge Filter (5 micron) for 500 LPH capacity. Make : ION Exchange india ltd or equivelents.
(b) supply only RO mebrane Model 8040/4040 BW400 Max operating pressure 300 PSI for 500 LPH capacity. Make : ION Exchange india ltd or equivelents.
(c) Supply only RO plant INDION New generation Multigrade filter (NGMF) media for 500 LPH capacity.ION Exchange india ltd or equivelents.
(d) Supply only RO plant INDION New generation Multigrade filter (NGMF) Top Stunner 500 LPH capacity. Make : - ION Exchange india ltd or equivelents.
(e) Supply only RO plant Low pressure Switch for 500 LPH capacity Make : - ION Exchange india ltd or equivelents.
(f) Supply only RO plant Antiscalant 8211 chemical for 500 LPH capacity make : ION Exchange india ltd or equivelents. Make : - ION Exchange india ltd or equivelents.
(g) Supply only RO plant chemical tank 100 ltr for 500 LPH Capacity Make : - ION Exchange india ltd or equivelents.
(h) Supply only RO plant Antiscalant dozer matric pump for 500 LPH capacity Make : - ION Exchange india ltd or equivelents.
(j) Supply only Multiport valve of filter for Ro plant 500 LPH capacity. Make : ION Exchange india ltd or equivelents.
Supply and replacement of following spare parts / Accessories of RO of Cap - 20/25 Ltrs Per Hour : -
(a) Diaphragm Pump of RO Cap - 20/25 Ltrs
(b) RO Membrane of RO Cap - 20/25 Ltrs
(c ) Primary Filter of RO Cap - 20/25 Ltrs
(d) SMPS Adapter input voltage 120 - 300VAC, output = 24VDC, 2.5 Amps complete
Supply, fixing of replacement contactor 22 to 32 Amps capacity 1 NC, AC 3 phase 415 Volts, 50 HZ complete all as specified.
Supply, fixing of replacement Contactor ML 6, 2 NO+2NC, 3 pole, AC 3 phase 415 Volts, 50 HZ complete all as specified.
Supply, fixing of replacement thermal over load relay of range 66 to 110 Amps complete all as specified.
Supply,fixing of replacement thermal over load relay of range 15 to 32 Amps complete all as specified.
S&F in replacement of Unplasticised PVC pipe including fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.of size 25 mm dia all as specified.
S&F in replacement of Unplasticised PVC pipe including fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., size 40 mm dia all as specified .
S & F PVC gate valve 25 mm dia bore all as specified.
S & F PVC gate valve 40mm dia bore all as specified.
Supply only Chlorine test kit with all testing fitment and solution complete all as specified.
Supply only pH test kit with all testing fitment and solution complete all as specified.
Supply only TDS test kit complete all as specified.
Taking up or down G.I. tubing and connection of size 80 mm bore complete all as specified.
Cleaning and refixing of old GI tubing obtained form Item No. 45 of Sch. - A above and connections in new or old position (walls, trenches, ceiling and floors etc.) of size 80 mm bore all as complete all as specified.
S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 80 mm bore complete all as specified.
M&L for Development of bore well with high pressure compressed air by using air compressor and pumping muddy water continuously 8 Hrs or as directed by Engineer-In-charge without break including lifting and lowering of submersible pump motor set complete all as specified. (Note:- Compressor, T & P and fuel shall be arranged by contractor.)
Tulsi Enterprises (BID ID -3342016)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .