ADDN ALTN TO MD ACCN OF OFFICERS, JCO AND ORs AT MALHOTRA ENCLAVE, VIKRAM ENCLAVE AND GOLCONDA ENCLAVE AT AURANGABAD

Amount

Taking down chowkat or frames (wooden /steel) with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed including making good disturbed wall surfaces/jambs with cement plaster in 1:4 of thickness as required at site or disturbed masonry, if any, in PCC 1:3:6 type C-1 using 20 mm graded stone aggregates finished even & smooth using extra cement all as specified and directed.

Taking down chowkats or frames (wooden/steel) with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed including making good disturbed wall surfaces/jambs with cement plaster in 1:4 of thickness as required at site or disturbed masonry, if any, in PCC 1:3:6 type C-1 using 20 mm graded stone aggregates finished even & smooth using extra cement all as specified and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced.

Dismantling floor hearth or wall tiling in cement mortar bedding (but not backing) removing serviceable tile & rubbish off the premises.

Dismantling stone slab/tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, Apron etc

Taking up or down carefully steel tubing and connections including cleaning for refixing of size 15mm bore.

Taking up or down carefully steel tubing and connections including cleaning for refixing of size 20mm bore.

Taking down rain water pipe and eaves gutter (any size & pattern), including all fittings, heads, shoes, bends, sawn-necks,etc including cleaning or refixing or removal to store (Measured overall as fixed along the centre lineover fittings & accessories).

Dismantling of cast iron or PVC pipe incl all fittings & accessories, 100/75mm dia and in any position all as specified.

Disconnecting existing tank exc 250 ltr & n.exc 500 ltr capacity, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required, reconnecting & refixing in position (cleaning, repairing etc measured separately).

Disconnecting existing tank exc 500 ltr & n.exc 1000 ltr capacity, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required, reconnecting & refixing in position (cleaning, repairing etc measured separately).

Demolition of cement concrete unreinforced of roofs, floors (other than ground floors), beam, staircases, lannding, chajjas and similar suspended work.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete.

Demolition of brick of any type built in cement mortar in foul condition etc complete all as directed.

Demolition of reinforced cement concrete (other than ground floors), beams, staircase, landings, Chajjas and other similar suspended works.

Dismantling existing water tanks of capacity exc. 250 ltr but n.exc 500 ltr and removing to store etc. complete all as directed.

Dismantling existing water tanks of capacity exc. 500 ltr but n.exc 1000 ltr and removing to store etc. complete all as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

S&F 100mm, butt hinges, type B-21,extruded aluminium alloy with galvanised mild steel hinge pin.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S & F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S&F for pressed steel frames of size 75 X 60 mm for Cupboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm)all as specified.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone agg as in coping, on top of wall, bed blocks for hold fast, lintel band upto 1.5 mtr span and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work.

S & F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated.

S & F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc. (without sash bars), edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated.

S & F 30mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panells commercial type on both faces incl 6mm thick Ist class HW (Teakwood) beading all around on edges.

S & F 25mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panells commercial type on both faces incl 6mm thick Ist class HW (Teakwood) beading all around on edges.

S&F 20mm thick medium density flat pressed 3 layered particle board exterior grade quality with 5mm thick teak wood edging all around as in cup board shelves complete including dismantling of old particle board shelves all as specified and as direcetd.

Supply, fabrication and fixing of kitchen cabinet back sides, partition and shelves made out of 18 mm thick PVC board plain fitted with necessary arrangement fixed with screwes/adhesives complete all as specified and as directed.

M&L for providing kitchen cabinet with shutters in required size at site made out of 18 mm thick PVC board one side laminated and other side plain fitted to wall. The panels shall be fabricated using adhesive, screwed and secure as required. All edges shall be covered with 1.5mm thick edges leaping tapes or 90 degree edge bent finish as per manufactures instructions complete all as specifed and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm & fixed with stainless steel wire staples all as specified.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm & fixed with stainless steel wire staples all as specified.

S & F 300mm, Mild Steel ordinary rat tail rod pattern spring including roller and roller plate complete.

S & F butt hinges 100mm size MS cold rolled medium weight all as specified.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.

S&F aluminium handles, anodised, cast type, of size 100 mm

S&F aluminium handles, anodised, cast type, of size 150 mm

S&F Hasp and staple safety type aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws of 100mm size.

S&F continuous (Piano) hinges, mild steel bright finished or electro galvanised width of flap 30mm

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 150mm size overall.

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.

S&F sheet glass ordinary quality, 4mm thick and glazing with oil putty in square n.exc. 0.50 Sqm in each pane.

S & F figured glass pin head type, 4mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane.

M&L for cutting holes in brick walls built in cement mortar including making good dismantled portion in CM 1:3 or cement concrete 1:2:4 Type B-1 exc half brick work but n.exc one brick complet all as directed

M & L for preparation of old painted steel surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed.

M & L for preparation of old painted wooden surfaces of any descrition n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint.

M & L for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed.

(a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc.

(b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt).

(c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner.

(d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.

(f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2.

(g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete;

M&L for chequered cement concrete tiles 25cm x 25cm x 22 mm thick, with grey cement and pigment, set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6).

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), 25mm thick, finished surface even and fair.

M&L full body Vitrified coloured tiles of light colour shade 10 mm thick polished, size of tile 600mmx600mm/595mmx595mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

M&L full body Vitrified coloured tiles of dark shade 10 mm thick polished, size of tile 600mmx600mm/595mmx595mm , as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.

M&L for Non skid coloured ceramic tiles, joint free, coloured tiles 9mm to 10mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for Non skid coloured ceramic tiles, joint free,7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450x300x7mm thick of approved colour as in skirting/dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete over & including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of dado all as specified and directed.

M&L 20mm thick granite(of any type) work (table rubbed & polished ) in window door cills/jambs ,steps, pillars, cooking platform like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite over & including 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-charge.

M&L hand cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor, treads etc including rubbing and polishing laid over and including screed bed 10mm thick in CM 1:4 complete all as specified and directed.

M&L for prepolished machine cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in treads of steps etc laid over and including screed bed 20mm thick in CM 1:6 complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 600mm

S&F in repair 15mm bore brass chromium plated angular stop valve, screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated shower rose with or without swivel joints, any size including fixing to a steel pipe or union of size 125mm size.

S&F in repair stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe of 15mm bore.

S&F 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete fixed in repairs.

S&F for Soap tray, brass chromium plated any type & fixed to plugs on wall with chromium plated brass screws all as directed.

S&F in repairs 15mm bore bib taps fancy type, brass chromium plated, cast copper alloy with crutch or butter fly handle, , screwed down, screwed for iron pipes or for brass ferrule complete all as specified & directed.

S&F brass CP mixer 15mm bore for mixing hot & cold water, screwed down for iron pipe for wash hand basin complete all as specified & directed.

S&F brass CP wall mixer Non-telephonic shower arrangement with connectimg legs & wall flanges conforming to cat part No. CON-219KN of 'Jaquar' or of equvivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F sink mixture with regular swining spout wall mounted ) with connecting legs &wall flanges conforming to cat part No. LYR-38309 of 'Jaquar' or of equvivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F stainless steel plate racks of size 31" x 36" x 10" (or nearest size) conforming to cat part No. SSKPR-314 of Silver Shine or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F stainless steel plate racks of size 31" x 30" x 10" (or nearest size) conforming to cat part No. SSKPR-315 of Silver Shine or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F Sinks with Drainage board made of stainless steel 1mm thick, glossy, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm, bowl size 410mmx352mmx200mm {or nearest size} conforming to cat part No. SBSD 05(RR) of Jayna or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F for mirror cabinet PTMT of 400x500mm (or nearest size) with magnetic locking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs complete conforming to cat No. 554 of Prayag or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors,complete all as specified.

Refixing only 15 mm dia old steel tubuing and connections in new or old possition (wall,ceiling and floors etc)

Refixing 20 mm dia old steel tubuing and connections in new or old possition (wall,ceiling and floors etc)

S&F GI tubing 25 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors,complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 100 mm diameter of outlet, all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F PVC(SWR) pipes double socketed, 75mm bore in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified & directed.

S&F PVC(SWR) pipes double socketed, 110mm bore in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified & directed.

S&F PVC (SWR) bends any radius 110mm bore provided with access door.

S&F PVC (SWR) bends any radius 75mm bore provided with access door.

S&F PVC (SWR) Tee any radius 110 mm bore provided with access door.

S&F PVC (SWR) Tee any radius 75 mm bore provided with access door.

S&F PVC (SWR) junction, (Double Tee) equal or unequal 110mm bore

S&F PVC (SWR) vent cowl of 110mm bore

S&F PVC (SWR) vent cowl of 75mm bore

S&F in repairs 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting chases in concrete block or slab walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc.,and making good, cutting not exc 10 cm girth

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orissa pattern cat part No. CALINA S3010102 of CERA or of equivalent model in makes as specified in Appx 'C' with P or S trap of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.

S & F in repairs Wash down water closet (Pedestal pattern) cat part No. S1053101 of CERA or of equivalent model in makes as specified in Appx 'C' with P or S trap , white in colour complete including PVC white seat cover Cat part No B1510123 of CERA or of equivalent model in makes as specified in Appx 'C' (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe and connection to antisyphonage pipe etc complete all as specified and directed.

S & F in repairs PVC low level flushing cistern of 10 ltrs capacity cat part No. S1010110 of CERA or of equivalent model in makes as specified in Appx 'C' inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make.

S&F corner glass shelf, size 225mmx225mmx8mm thick including brackets complete all as specified and directed.

S&F in repair wash hand basin of size 515 x 410x195 mm vitrous China white flat back conforming to cat part No. S2040121 of CERA or of equivalent models in makes specified in Appx 'C', including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

Taking down carefully existing bituminous felt including plastered lime or cement concrete of any thickness and cleaning of the surface of roof treanches including flushing and junction parapets kerb walls PCC fillets beanching etc with wire brushes and removing of the rubbish to a distance not exc 500mtrs and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified.

Cutting out cracks to V-section in existing roofs or terracing, cleaing out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight)

M&L Water proofing treatment to RCC roof slab and shall be carried out as specified below all as specified and directed :-

(a) M&L laying 25mm thick PCC type B-0,(1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC as per manufacturers instructions. (Water proofing compound shall be measured & paid separately).

(b) The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projection washed dried up and cleaned of all foreign matter and dust to receive primer.

(c) M&L Applying bituminous primer on cleaned surface @ 0.40 Lit/sqm.

(d) M&L Providing APP polymer modified approved membrane 3mm thick, non woven, polyster,weighing not less than 3.6 Kg/Sqm and laying on roof surface and parapets with laps, overlaps and sealing joints as specified and applied completely by torch application method, the overlap of membrane while torching shall be kept 100mm on length wise and 100 mm width wise; all as specified & directed.

(e) M&L Carrying out test by flooding water for 24 hrs for leakages & seepages and rectifying the leakages / seepages / defects, if any, to the entire satisfaction of GE.

(f) M&L Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 liter/Sqm on the top of membrane surfaces complete all as specified & directed.

(g) The treatment shall be carried out as per manufacturers instructions and through authorised applicator of manufacturer.

(h) Notes:- The contractor shall furnish the following before and during progress of water proofing work:- (i) Quality confirmation from the manufacturer of the product alongwith quantity supplied. (ii) Manufacturer test certificate. (iii) The result, if tested in any of the independent laboratory or testing if ordered by GE, the testing charges shall however shall be borne by the contractor.

Supply only liquid water proofing compound

M&L for cement concrete PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shpe complete all as specified (Water proofing compound shall be measured & paid separately).

M&L for rendering 12mm thick in cement mortar 1:6 on on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

M&L for rendering 15mm thick in cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound as per manufacturers instructions.(Water proofing compound shall be measured & paid separately).

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling finished even and fair.

Material and labour Brickwork using old size fly ash bricks, straight or curved on plan to any radius in half brick thick wall, built in CM (1:4) complete all as specified & directed.

Material and labour Brickwork using old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for 75mm cement concrete type C1 1:3:6 (20mm graded stone aggregate) as in plinth protection including necessary joints and formwork all as directed.

M & L for RCC 1:1.5:3 type A-1 Nominal mix (20mm graded stone aggregates) in Chajjas

M&L for reinforced cement concrete type A1 1:1.5:3 type (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified

M & L for precast cement concrete 1:2:4 type B-1 using 20 mm graded stone agg for cover slab of manholes set in cement mortar 1:4

S & F MS TMT bars 10mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns and binding with mild steel annealed wire of dia not less than 0.9 mm or securing with clips complete all as specified and directed .

S&F MS TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

Use and waste form work to soffits of suspended slab such as roof slab n.exc. 200 mm thick for rough finished surfaces of concrete.

Use and waste of form work to edge of concrete flat, treads, breaks in floor, window cills, concrete railling, opening in concrete walls, floor & roofs n.exc 20 cm wide and side of RCC bands in walls, horizontal/sloping and similar works exc 10 cm but n.exc 20 cm wide for roughed finished surfaces of concrete.

Use and waste of form work to Chajjas, troughs and similar items including edges for rough finished surfaces of concrete.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F 20 mm ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated aluminium rod & high density plastec ball screwed for iron pipe and fixed. etc complete.

Removal of vegetations including roots etc from wall/roof area n.exc 1.00 sqm each by applying suitable chemical and making good the surface by grouting the holes and matching the plastered surfaces 15 mm thick in cement mortar (1:3) complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scraping, sand papering or by using mechanical sander and preparing plastered surfaces and applying two coats of acrylic emulsion distemper over a coat of acrylic primer of approved tint on walls by using roller/spray complete all as specified and as directed.

M&L for preparing new plastered surfaces applying two coats of acrylic emulsion distemper over a coat of acrylic primer of any description of approved tint.

Complete removal of existing treatment on Old Internal wall surfaces of any desciption , preperation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and M&L for the following : :- (a) Applying not less than 1.5mm thick wall care putty in two coats (Total thickness in two coats shall not be less than 1.5mm) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified (b) applying two coat of acrylic emulsion distemper of approved tint over a coat of acrylic primer on prepared surface as (a) above by using Airless spray / Roller over complete all as specified complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of using of Mechanical equiment are not posiible

Prepration of new plastered Internal wall surfaces complete all as specified and M&L for the following :- (a) Applying not less than 1.5mm thick wall care putty in two coats (Total thickness in two coats shall not be less than 1.5mm) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified (b) two coat of acrylic emulsion distemper over a coat of acrylic primer by using Airless spray / Roller over prepared surface as (a) above. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of use of Mechanical equiment are not posiible.

Preparation of new plastered surfaces of wall and applying three coats of white wash on wall all as specified

Preparing newly plastered surfaces and applying three coats of white wash in ceiling.

Complete removal of existing treatment and applying two coats of white wash on ceiling all as specified and directed

Material and labour scrapping and removing old paint, lease material and algae fungus then cleaning of surface with water using pressure washer machine, then crack filling with acrylic based textured crack filler and then applied with one coat of primer/ primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ratio 5:4:1 followed by application of two coats of modified acrylic apex exterior emulsion paint of approved shade having silicon additives in paint which shall give 5 year of performance warranty, (Make : Burger/Nerolac/Asian paint) complete all as specified & directed.

M&L Preparation of new plastered surfaces of walls & applied one coat of primer/ primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ratio 5:4:1 followed by application applying two coats of modified acrylic apex exterior emulsion paint which shall give 5 year of performance warranty, (Make : As per Appendix 'C').

Preparation of old painted wooden surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed.

S&F in repair Brass Eye door viewer (magic eye) of Standard pattern fixed in position for door shutters

M&L for rubber sheet 50mm wide and of thickeness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complete all as specified.

M&L for stainless steel fancy type peg set of four and fixed in position with steel screws complete all as specified and directed.

M & L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified

M & L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 cement : 2 coarse sand) to match the existing floors complete all as specified.

M&L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole at 300 mm intervals incl drilling holes at 45 degree and replugging them with CM 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified

M&L for providing precast cement concrete type B0 1:2:4 (12.5 mm graded agg.) louvres and jallies 25mm thick (measured solid) incl all moulding but excl frames set in CM 1:4 complete all as specified. (Pre cast frame shall measured and paid separately).

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded agg) as in bressumers, steps quoin blocks (for use with maronry) and set in CM 1:4 complete all as specified.

S&F factory made solid PVC moulded Particle board core door/cupboard shutters 28 to 30 mm thick (stiles) designed with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specified.

M&L for griding and polishing existing kota flooring all as specified and as directed.

S&F stainless steel toilet paper holder of suitable size all as specified and as directed

M&L for welding in repair n.exc 2.5 cm in length to metal of any thickness to be welded all as specified and as directed.

S&F for 0.56 mm plain aluminium sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing all as specified anddirected.

M&L for 25 mm thick pre-formed filler board for expansion joints.

Taking down trusses etc., above 4 mtr up to 8 mtr for renewal of any defective members (timber renewed to be measured separately) and reassembling.

S&F for rolled mild steel sections conforming to grade E-250 (Fe-410W, quality A) as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee angle channel or flat sections) including distance pieces, nuts & bolts, etc. complete.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in plates (plain or chequered) channels, square cuts or notched (ordinary and counter sunk) forming holes, without any attachment.

Supply and fixing Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed.

Providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including GI powder coated frame angle /tee grid frame work for ceiiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottoam tee as in cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling incul fixing to ceiling fasteners manufacturers instructions complete. MAKE: VINYL TOUCH of LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBBAIN)/INDIAN GYPSUM.

S&F chicken wire mesh having 10 mm aperture and 0.63 mm dia fixed to wall surfaces with nails all as specified and as directed.

Removing the loose spalled concrete portions, cleaning thoroughly by making it free of dirt, rust etc. and applying one coat of DR. FIXIT Epoxy Zinc Primer to the reinforcement bars, applying 1 coat of bonding agent (DR. FIXIT Pidicrete MPB) mixed with cement (ratio 1:1) and finally levelling with DR. FIXIT Polymer Mortar PX etc complete.

M & L for clean sawn second class hard wood in scantling to repairs, replace old decayed timber (including Piecing, scarfing etc of old & new timbers if required), complete all as specified & directed

Dismantling structural steel work as in purlins, rafters etc but excluding framed strusses, complete all as specified & directed.

S & F stainless steel hinges of size 35mm fixed to kitchen cabinets with SS screwes complete all as specified & directed.

S & F 100mm size brass chromium plated handles for kitchen cabinet doors complete all as specified & directed.

S & F magnetic catch of size 36mmx28mmx10mm, stromg holding strength to hold constantly opening cabinet doors complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as specified

Taking down carefully by unscrewing from the boards, out lets boxes/ceiling/walls the fittings and fixtures such as switches,sockets,ceiling rose, lamp shades lamp holders, tube light, bulk head fittings etc of any type/size and capacity

M & L for point wiring complete with and including single core FRLS (H) PVC insulated unsheathed flexible bright annealed multi stranded copper conductor cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC casing and caping on walls/ceiling including all accessories/fittings/ etc; , ISI marked with and including factory made terminal boxes with cover plates suitable for modular type switches, sockets, fan regulators etc including 1.5 Sqmm (22/0.30 mm) 1100 V grade FRLS (H) PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end, all as specified & directed for :-

(a) One light point or one fan point controlled by one, one way switch

b) One bell / buzzer point controlled by one push button on the same board with other or independent

(c) One 3/5 pin 5 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals.

(d) One 5 pin 5 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals

(e) One light point controlled by two way switches

(f) All as per item No 174 here-in-before but with 2.5 Sqmm cables for one 15A, 6-Pin socket outlet point on independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete all as specified and directed by Engr in Charge.

M & L point wiring complete with and including single core PVC insulated unsheathed flexible bright annealed multi stranded copper conductor FRLS (H) cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/fittings/junction boxes/inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets fan regulates etc; including 1.5 Sqmm (22/0.30 mm) 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLS (H) cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & directed for One light point controlled by one switch 6 amps. (Note: Rate quoted is deemed to be inclusive for cutting chases in wall for concealed wiring & making good disturbed surfaces to match existing)

(a) One light point or one fan point controlled by one, one way switch

(b) One light point controlled by two way switches

(c) One bell / buzzer point controlled by one push button on the same board with othter or independent

(d) One 3 pin 5 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals.

(e) One 3 pin 5 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals.

(f) All as per item No 175 here-in-before but with 2.5 Sqmm cables for one 15A, 6-Pin socket outlet point on independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete.

(g) All as per item No 175 here-in-before but with 4 Sqmm cables for one 20A,SPN MCB socket outlet point on independent board with & including 4 Sqmm FRLS (H) cable as earth wire complete.

S&F switch modular type 6 Amps one way one module 230 volts white /ivory finish all as specified and as direcrted

S&F switch modular type15/16 Amps one way one module 230 volts white /ivory finish all as specified and as directed

S&F switch modular type 6 Amps two way one module 230 volts white /ivory finish all as specified and as directed

S&F bell push modular type 6 Amps one module 230 volts white /ivory finish all as specified and as directed

S&F socket outlet modular type 6 Amps, 2/3 pin combined two modules suitable for 3 pin/2 pin 5 Amp plug tops, complete all as specified and directed.

S&F switches modular type 16 Amps one way one module 230 volts white /ivory finish all as specified and as directed

S&F Bell Ding Dong AC 230 Volts single pole complete all as specified and directed.

S&F ceiling rose surface PVC 50 mm dia 3 terminals including PVC mounting block white/ ivory /urea finish complete all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip including inverter emergency LED bulb white colour of capacity 10watt with 5 to 6 hrs back up & one year warranty complete all as specified & directed conforming to cat part No. 10WB22CWIP of Halonox or equivalent model in list of makes specified in Appendix 'C'.

S&F modular type fan regulator 120 W, 2 module, step type, complete all as specified and directed.

S & F LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Makes: Cat part No. HEXAFT10WLED857SSYMBOPC of Havells or of equivalent model in other makes specified in Appx 'C'.

Supply, installing, connecting, testing and commissioning of electric water Heater storage type capacity 25 Liters 5 star rated with precaliberated thermostat, safety valve, preset thermal cut out, fire retardant power cord, ABS outer body, colour changing indicator, copper heating element with rated voltage 2 KW, 230 volt, 50 Hz of temperature range 35 to 75 degree Celsius, horizontal or vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with water and electric connections including hot and cold connection pipes complete all as specified and as directed. Make as listed in Appendix 'C'.

S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size 16 mm .

Supply and fix Stop valves, cast copper alloy ,chromium plated screwed for iron pipe and fixed of size 15 mm bore

Supply & fix Ceiling fan, 1400 mm sweep with BLDC motor, energy saving, after assembling the same with the fan/hook/box and connecting up complete with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan complete all as specified and as directed. Make : Havells Cat No ES-60 efficiency Neo/ Atomberg (Naveo) or equivalent in makes listed in Appendix 'C'.

Supply and fix Exhaust fan made of sturdy engineering plastic complete with louvers shutter 230 volt 50 HZ RPM 1200 copper winding of sweep 250 mm and fixing the exaust fan in the space provided in window shutters of toilets & bathrooms including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to exaust fan all as specified and as directed. Makes as listed in Appendix 'C'.

Supply and fix Exhaust fan metal body exhaust fan 300mm sweep, 1400 RPM single phase light, one number of speed set, fixing by means of rugged bolts, nuts and washers etc on round hole cut in wall, including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC,SP 230 v electric supply complete all as specified and directed.. Makes as listed in Appendix 'C.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10Amp 240 V ( AC and Geyser ) complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Makes : Cat part No. LUMILINEPLUSBS20WLED865SPCSS of Havells or of equivalent model in other makes specified in Appx 'C'.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Makes : Cat part No. LUMILINEPLUSBS10WLED865SPCSS of Havells or of equivalent model in other makes specified in Appx 'C'.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Makes : Cat part No. ENDURACITYLITEPLATPLUSSL 35W LED757SASYBOPC of Havells or of equivalent model in other makes specified in Appx 'C'.

S&F MCB SP 6-32 Amps, "C" series , 240 V complete .

S&F MCB SPN 6-32 Amps, "C" series 240 V complete .

S&F MCB DP 40 - 63 Amps, "C" series , 240 V complete .

S&F MCB DP SPN 63 Amps, "C" series , 240 V complete .

S&F MCB TPN 63 Amps, "C" series, 415 V complete .

S&F MCB TPN 100 Amps, "C" series , 415 V complete .

S&F sheet metal enclouser for DB SPN 4 way with 200 Amp Rated Bus bar 240v. Double door suitable for housing MCB,s and isolator complete .

S&F sheet metal enclouser for DB SPN 8 way with 200 Amp Rated Bus bar 240v. Double door suitable for housing MCB,s and isolator complete .

S&F sheet metal enclouser for DB SPN 12 way with 200 Amp Rated Busb ar 240v. Double door suitable for housing MCB,s and isolator complete .

S&F sheet metal enclouser for DB TPN 4 way with 200 Amp Rated Bus bar 415. Double door suitable for housing MCB,s and isolator complete .

M &L for sub main wiring with 2 single core FRLS (H) PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4.0 Sqmm drawn through & including concealed PVC conduit heavy grade with and including 1 single core 4.0 Sqmm 1100 V grade FRLS (H) PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note 1: 3 runs ( 2+1) of single core FRLS (H) PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC conduit heavy duty shall be measured as one unit. Note 2: Rate quoted is deemed to be inclusive for cutting chases in wall for concealed wiring & making good disturbed surfaces to match existing.

M &L for sub main wiring with 2 single core FRLS (H) PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6.0 Sqmm drawn through & including concealed PVC conduit heavy grade with and including 1 single core 6.0 Sqmm 1100 V grade FRLS (H) PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note 1: 3 runs ( 2+1) of single core FRLS (H) PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC conduit heavy duty shall be measured as one unit. Note 2: Rate quoted is deemed to be inclusive for cutting chases in wall for concealed wiring & making good disturbed surfaces to match existing)

Supply, laying, testing and commissioning of UG LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminium conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete of following sizes :-

(a) 25 sq mm x 3.5 core

(b) 35 sq mm x 3.5 core

(c) 16 sq mm x 4.0 core

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, wells, manholes, pier holes, laying of cable & pipes etc not exceeding 10 sq m on plan not exceeding 1.5m in depth and getting out in soft/loose soil.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick as in soil complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50 m and depositing where directed at a level not exceeding 1.5 m from the starting point complete all as specified & directed.

M&L dry river sand cushioning for cable protection in trenches complete as per the process specified in SSR Part-I 2009, all as specified and directed. Note. Punned thickness of the sand shall be measured and paid.

M&L for GI tubing 40 mm bore light grade for protection of cable with all necessary fittings accessories such as MS 40x3mm clamps of suitable length , nuts, bolts and washers and fixed complete tp wall/ceiling or laid under floors complete all as specified & directed by Engr in Charge.

Supplying and laying un-reinforced precast concrete cable cover factory made, ISI marked of class LV type 1, flat of size 250 mm x 150 mm x 40 mm, complete all as specified and directed by Engr in Charge.

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bats at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site all as specified and directed by Engineer-in-charge. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)

M &L for sub main wiring with 2 single core FRLS (H) PVC insulated, unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4.0 Sqmm drawn through & including heavy grade PVC casing and caping on walls/ceiling including all accessories/fittings etc with & including 1 single core 4.0 Sqmm 1100 V grade FRLS (H) PVC insulated, unsheathed, multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note 1: 3 runs ( 2+1) of single core FRLS (H) PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC casing and caping heavy duty shall be measured as one unit.

M &L for sub main wiring with 2 single core FRLS (H) PVC insulated, unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6.0 Sqmm drawn through & including heavy grade PVC casing and caping on walls/ceiling including all accessories/fittings etc with & including 1 single core 6.0 Sqmm 1100 V grade FRLS (H) PVC insulated, unsheathed, multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note 1: 3 runs ( 2+1) of single core FRLS (H) PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC casing and caping heavy duty shall be measured as one unit.

SOOD ASSOCIATES PVT LTD

nhsaluji and associates

M.R.Mutha Engineers