Renovation and Repair works to Type 3 Quarters Block No. 4 and 14 to enhance the stability and aesthetic environments of the quarters building at Analmin Nagar

Providing two legged scaffolding for works above 3m height, using 13 to 15 cm dia casuarina props to a distance between the two rows are being 1.25m and the spacing of posts being 2m in both the rows with horizontal posts with 0.50m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., including cost of all materials, labours, lead, lift, safety measures, etc. complete.

Dismantling the existing damaged RCC for the required width & depth as per the instructions of engineer in charge and disposing the debris 1km away from the site including cost of all materials, labours, lead, lift, curing, etc. complete.

Chipping the existing concrete and roughening the surface for future bonding and thorough cleaning the surface including cost of all materials, labour, lead, lift, curing, etc., complete.

Clean removal of cracked cement plaster from walls including cost of all materials, labour, lead, lift, curing, etc., complete.

Providing centering and shuttering using steel structures & props 10 to 13cm dia, including cost of all materials, labours, lead, lift, etc. complete.

Providing RCC 1:11/2:3 using OP/PP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying & providing RTS/ MS rod including cutting, bending, tying and fixing in position as per specification including binding wires, cost of all materials, labours, lead, lift, etc. complete.

Painting one coat of Nitozinc primer (or) equivalent mixed with Hardener in the ratio 3:1 after thorough cleaning the rust in the old reinforcement rods including cost of all materials, lead, lift, tools, etc., complete.

Plastering with CM 1:3, 10mm thick for concrete surface including cost of all materials, labour, lead, lift, curing etc. complete.

Plastering with CM 1:5, 12mm thick for brick wall surface including cost of all materials, labours, lead, lift, curing, etc., complete.

Dismantling of existing brick wall including cost of materials, labours and cleaning away from the work spot lead lift, curing, etc. complete.

Brick work in CM 1:5 using fly ash bricks including cost of all materials, Labours, lead, curing, etc. complete.

Dismantling the damaged Terrace tiles and disposed away from the site as directed by the engineer in charge including cost of labour, Lead lift, T & P etc., complete.

Providing Terrace tiles of single 200 x 200 x 20mm tiles using CM 1:3, mixed with crude oil 1% by weight of cement and pointing with same oiled mortar etc., including cost of all materials, lead, labours, lift curing etc., complete.

Providing plinth P.C.C 1:4:8 using OP cement with 20mm to 12mm chips machine crushed HBG metal including cost of all materials, labour, lead, lift, Curing, etc., complete.

Supplying and fixing Western Water closet of approved quality and colour and size with 'P' or 'S' trap with double flapped seat & seat cover with brass hinges and 10 lit capacity PVC low level flushing tank with all internal fittings including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying laying and jointing in position of 15mm & 20mm dia GI pipes ('B' Class) as instructed by the site Engineer rate, including cost of all materials, labour, lead, lift, with necessary scaffolding etc., complete. a) 15mm dia GI Pipe

B) 20mm dia GI Pipe

Supplying, laying and jointing 110mm dia. PVC pipes of 4 kg/cm2 of approved best quality conforming to I.S.S. and with I.S.I mark, including cutting and fixing with PVC specials and fixing to wall with necessary teakwood plugs, PVC clamps and screws making grooves the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges including cost of all materials, labour, lead, lift, T&P etc., complete.

Supplying, laying and jointing 75mm dia. PVC pipes of 6kg/cm2 of approved best quality conforming to I.S.S. and with I.S.I mark, including cutting and fixing with PVC specials and fixing to wall with necessary teakwood plugs, PVC clamps and screws making grooves the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges including cost of all materials, labour, lead, lift, T&P etc., complete.

Supplying and fixing GM Wheel valve of approved quality including cost of all materials, labour, lead, lift etc., complete a) 32mm Wheel valve

B) 25mm Wheel valve

NSR AND COMPANY