Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹4.0 L+₹48,550 (13.9%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹4.4 L+₹87,100 (25.0%)Rejected-AOC | L3 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | rameshwar sharma L3 | SHANKER BOREWELLS AND ENGINEERS L1 | SRIDARSHAN ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck/ tractor where only road available, DTH & ODEX/ Percussion Calyx/RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in- Charge. | 1 | Each | 5,200 ₹5,200 | 4,500 ₹4,500 Lowest | 5,000 ₹5,000 |
| 2.00Drilling bores of 165mm dia as per IS:2800-1979 using DTH from ground level in the over burden as per directions of Engineer-in-Charge/ Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sand stone, limestone, dolomites, conglomerate, silt, clay or any other type of sedimentary, metamorphic and igneous rock including cost of attachments, consumable stores, bits, water, POL etc. complete in all respect as detailed below:- | ||||||
| 2.01 | From 0m to 20m depth | 20 | P/Rmt | 1,000 ₹20,000 | 700 ₹14,000 Lowest | 1,000 ₹20,000 |
| 3.00Drilling bores of 152 mm dia as per IS : 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate, boulder, pebble,gravels, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0 mm thick MSERW fincut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directions of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | ||||||
| 3.01 | Non Trible Area | 70 | P/Rmt | 2,000 ₹1,40,000 | 1,600 ₹1,12,000 Lowest | 1,800 ₹1,26,000 |
| 4.00Drilling bores of 115mm dia as per IS: 2800-1979 from bottom of overburden to required depth in conglomerate, collapsible strata and rocky formations complete in all respect as per direction of Engineer-in-Charge/ Hydrogeologist. | ||||||
| 4.01 | Non Trible Area | 10 | P/Rmt | 1,000 ₹10,000 | 700 ₹7,000 Lowest | 1,000 ₹10,000 |
| 5.00Supplying and lowering of IS Marked 125 mm dia N.B. 5mm thick fincut MSERW casing pipes as per IS : 4270-2001 and requirement of ODEX attachement from approved manufacturers complete in all respect as per direction of Engineer-in-charge. | ||||||
| 5.01 | Non Trible Area | 90 | P/Rmt | 2,000 ₹1,80,000 | 1,600 ₹1,44,000 Lowest | 1,800 ₹1,62,000 |
| 6.00Prividing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer-in- Charge. | ||||||
Tender Value
₹3.5 L
EMD Value
₹6,950
Closing Date
29 Aug 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Solan
SH Drilling by DTH/ ODEX percussion/ Calyx/ RC portable rigs 90 metres deep.
2025_HPIPH_112471_1
11613-11712 dated 19.08.2025
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Item Rate
7 days
GP Nagali kandaghat
Please refer tender notice
8 documents required · 8 mandatory
₹500
Executive Engineer
₹6,950
25 Nov 2025
20 Aug 2025
29 Aug 2025
20 Aug 2025
29 Aug 2025
20 Aug 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .