REPAIR/MAINT OF EXTERNAL WATER SUPPLY DISTRIBUTION NETWORK OF PUMP HOUSE NO 2 INCLUDING FILTRATION PLANT PUMP MOTORS STARTER AND CLEANING OF OHT AND UG SUMPS AT FARIDKOT MIL STN

Amount

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation/pipe lines etc and getting out in soft/loose soil complete all as specified and directed .

Returning, filling in including spreading, leveling, watering & and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed .

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed .

Detection of leakage in main water line by necessary excavation in any type of soil & in any situation/depth including bailing out leakage water by suitable measures, repair to CI/DI /HDPE pipe of 300mm bore by opening the joint and fixing new fittings as required at site including cutting, threading for addition & alternation etc complete all as specified and directed. Note: (i) Quoted rate shall be deemed to include for earth work, making good the disturbed surfaces matching with existing surfaces with the necessary T&P as required. (ii) Lead joints and fittings shall be measured and paid separately.

All as per Ser item No 04 here in before but bore of pipe 200/150mm complete all as specified and directed .

All as per Ser item No 04 here in before but bore of pipe 100/80mm complete all as specified and directed .

Detection of leakage in water main on walls, floors or in trenches by necessary excavation in any type of soil & in any situation including bailing out leakage water by suitable measures, repair to PVC/GI / HDPE pipes of bore upto 25mm by opening the joint and fixing new fittings as required at site including cutting, threading for addition & alternation etc complete all as specified and directed. Note: (i) Quoted rate shall be deemed to include for earth work, making good the disturbed surfaces matching with existing surfaces with the necessary T&P as required. (ii) Fittings shall be measured and paid separately.

All as per Ser item No 07 here in before but bore of pipe 40mm complete all as specified and directed .

All as per Ser item No 07 here in before but bore of pipe 50mm complete all as specified and directed .

Supply only GI elbow 20mm bore

Supply only GI elbow 25mm bore

Supply only GI elbow 40mm bore

Supply only GI elbow 50mm bore

Supply only GI union 20mm bore

Supply only GI union 25mm bore

Supply only GI union 40mm bore

Supply only GI union 50mm bore

Supply only GI socket 20mm bore

Supply only GI socket 25mm bore

Supply only GI socket 40mm bore

Supply only GI socket 50mm bore

Supply only GI niple 20mm bore of length 15cm

Supply only GI niple 25mm bore of length 15cm

Supply only GI niple 40mm bore of length 15cm

Supply only GI niple 50mm bore of length 15cm

Supply only GI Tee 20x20x20mm bore

Supply only GI Tee 25x25x25mm bore

Supply only GI Tee 40x40x40mm bore

Supply only GI Tee 50x50x50mm bore

Taking up or down GI water tubing of bore 15mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 20mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 25mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 40mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 50mm including all fittings complete all as specified and directed .

M&L for Steel water tubing of 15 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

M&L for Steel water tubing of 20 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed.

M&L for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

M&L for Steel water tubing of 40 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed.

M&L for Steel water tubing of 50 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 15 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 20 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 25 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 40 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 50 mm dia of pipe complete all as specified and directed.

Supply , laying & testing cast iron pipes of 80mm bore with spigot and socket ends, centrifugally cast, class LA ,laid in trenches including taking down existing one complete all as specified and directed.

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 100mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-7 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking down existing pipes complete all as specified and directed .

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 150mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-7 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking down existing pipes complete all as specified and directed.

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 200mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-7 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking down existing pipes complete all as specified and directed.

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 300mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-9 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking down existing pipes complete all as specified and directed .

S&F in replacement of cast iron sluice valve of size 300mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 200mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 150mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 100mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 80mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F rubber gasket joints for water mains of bore 300mm including bolts,nuts,washers & white lead or mineral oil complete all as specified & directed .

S&F rubber gasket joints for water mains of bore 200mm including bolts,nuts,washers & white lead or mineral oil complete all as specified & directed .

S&F rubber gasket joints for water mains of bore 150mm including bolts,nuts,washers & white lead or mineral oil complete all as specified & directed .

S&F rubber gasket joints for water mains of bore 100mm including bolts,nuts,washers & white lead or mineral oil complete all as specified & directed .

S&F rubber gasket joints for water mains of bore 80mm including bolts,nuts,washers & white lead or mineral oil complete all as specified & directed .

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerbs/coping/bed plates and the likes including weathering, slightly rounded or champhered angles with necessary formwork for pipe support , finishing even and smooth without using extra cement complete all as specified and directed

Dismantling existing mild steel sheet cover of any thickness with frame work from existing valve pit and providing new cover of 3.0mm thick mild steel sheet with new frame work of angle iron 40x40x6mm duly welded with locking arrangement, butt hinges, handles including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for construction of Valve pit of size 1050mmX1050mmX1050mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed.

M&L for construction of Valve pit of size 900mmX900mmX900mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed.

M&L for construction of Valve pit of size 450mmX450mmX450mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed.

Cleaning of RCC Overhead reservoir of capacity 1.0 Lakh gallon and at approx 18 mtr to 21.35 mtr staging by scrapping the bottom surface & side walls by brooming with hard wire brush, removal of sludge/mud/silt and other foreign materials from the bottom with the help of buckets & rope manually, brought down to the ground level, preliminary washing properly, thereafter washing with concentrated bleaching powder solution (10 :1) of water and bleaching powder respectively and disposal of collected sludge/ mud material to a distance exc. 50 m but not exceeding 100 m from the site including applying a coat of cement base primer and making water supply system functional. Date of cleaning shall be written with white paint on the black strip approx size 30"x24" all as specified and directed

All as per item No 65 here in before but RCC Overhead reservoir of capacity 0.50 Lakh gallon complete all as specified and directed.

Cleaning of RCC Under ground sump of capacity 2.5 Lakh Gallon by scrapping the bottom surface & side walls by brooming with hard wire brush, removal of sludge/mud/silt and other foreign materials with the help of buckets etc , dewatering the entire sump and finally washing with concentrated bleaching powder solution (10 :1) of water and bleaching powder respectively and disposal of collected sludge/mud material to a distance exc. 50 m but not exceeding 100 m from the site including applying a coat of cement base primer and making water supply system functional. Date of cleaning shall be written with white paint on the black strip approx size 30" x24" complete all as specified and directed.

Removing/cleaning of mud & sludge upto the bottom of raw water receiving basin of dia 12.0 and 2.75 m deep including cleaning of weeds, bushes and vegetation etc inside the tank and upto 3 m distance in surrounding area of raw water basin and disposal of the removed silt/spoil to a distance not exc 50 m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and directed

Removal of mud and sludge from the jack wells including cleaning of internal side of jack well / fluculator with proper cleaning material complete all as specified and directed.

Site clearance and surface dressing by cutting and removing of elephant/wild grass (sarkanda) from all around the periphery of raw water reservior and removing from site to a distance not exc 50 m complete all as specified and directed.

S&F in replacement chlorine dosing pump of capacity 0.05 HP,dosing pressure upto 7 Kg/cm² with flow rate 0-10lph including all fixture complete all as specified and directed.

S&F flexible type coupling containing tread inside, of size TC-15 complete all as specified and directed.

S&F flexible type coupling containing tread inside, of size TC-17/TC-19 complete all as specified and directed

Chemical examination of raw water of the plant at water point No 01 from authorised laboratory complete all as specified and directed. Note:- Report to be submitted in triplicate.

Bacteriological examination of clear water of the plant at water point No 01 from authorised laboratory complete all as specified and directed. Note:- Report to be submitted in triplicate.

Supply only pig lead in slab form suitable for jointing different sizes of pipe lines complete all as specified and directed.

Supply and fix in replacement CI foot valve (Flanged) 300mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed

Supply and fix in replacement CI foot valve (Flanged) 200mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed

Supply and fix in replacement CI foot valve (Flanged) 150mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed

Supply and fix in replacement CI foot valve (Flanged) 100mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed

Supply and fix in replacement CI foot valve (Flanged) 80mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed

M&L for prepration of old metallic , treated irregular and curved surfaces of pipes , valves, motor, pumps , electric panels , steel railing , agitators of flocculators including removing existing treatment by scrapping, burning and painting with two coats of synthetic enamel paint complete all as specified and directed

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity.triple layered, hoisted and fixed in position complete all as specified and directed

Supply only spun yarn of different sizes suitable for water supply works complete all as specified and directed. Note : Required size of yarn will be provided by contractor during execution of work.

M&L for preparation of old painted steel surfaces of pump & motor set of capacity 1 to 1.5 HP and painting with one coat of synthetic enamel paint complete all as specified and directed .

M&L for preparation of old painted steel surfaces of pump & motor set of capacity 7.5 to 15 HP and painting with one coat of synthetic enamel paint complete all as specified and directed .

M&L for preparation of old painted steel surfaces of pump & motor set of capacity 30 to 40 HP and painting with one coat of synthetic enamel paint complete all as specified and directed .

M&L for preparation of old painted steel surfaces of pump & motor set of capacity 75 to 100 HP and painting with one coat of synthetic enamel paint complete all as specified and directed .

Supply only vinegar suitable for spraying on grass at water supply installations complete all as specified and directed

M&L for desilting of clay and mud deposited at the bottom of raw water storage sedimentation tank of size 119 x 48 x 4.6 m deep including removing of weeds, bushes and vegetation etc inside the tank and upto 5 m distance in surronding area of storage tank and disposal of the removed silt / spoil depositing to a distane not exc 50 m where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. Note : - Dewatering of tank shall be carried out through gravity/ pumping by the contractor at his own arrangement alongwith silt by means of pumping or any other approved means without damanging the surface, floor, walls of storage tank, the cost of which shall be deemed to be included in the quoted unit rate of the item

S&F shock treatment chart of size 3 x 2 sqm complete all as specified and directed

S&F gland packing of size 9mm to 13mm to be used for motors, pumps, valves etc complete all as specified and directed

Repair and servicing of fluculators assembly, oiling, greasing of rotating and fixed arms, replacement of central thrust bearing , slip ring assembly , repair servicing of flocculator shaft including MS stirrers and blowers complete all as specified and directed

Supply and inject grease through grease gun of good quality suitable and withstand the high temperature during functioning for motor and pump complete all as specified and directed

Supply and fixing Submersible flat copper conductor cable of size 35 sqmm x 3 Core suitable for 75/100 HP motor complete all as specified and directed

Supply and fixing mild steel nuts, bolts & washers of different size complete all as specified and directed. Note : Required size of nuts, bolts & washers will be provided by contractor during execution of work.

Taking proper shut down in writing, disconnecting all the electrical connections, dismantling the motor from the base plate and transporting the same for repair to workshop for rewinding, dismantling the motor/rotor, cutting and removing the old heated up/burnt winding of the stator/rotor, cleaning the slots,bearing,bushes etc ,rewinding the motor stator/rotor with super enameled copper winding wire of existing size , gauge and turns etc including all the insulating materials ie.varnish ,china glass paper,'F' class paper, insulating paper etc and transportation back the same after winding , reassembling at original position and testing complete of electric motor 75 HP to 100 HP,3 phase,415 volts,AC supply all as specified and directed . Notes:- (a) The contractor shall return the motor within week’s time after handing over for repairs to contractor otherwise a penalty of Rs. 1000/- per day will be charged from the contractor. (b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, nuts bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (c)The contractor shall arrange a visit of Engr-in-Charge to workshop for each job and cutting of complete burnt winding of motor shall be done in presence of Engr-in-Charge.

All as per Ser item No 97 here in before but of capacity 30 to 45 HP, 3 phase 415 volts AC supply complete all as specified and directed .

All as per Ser item No 97 here in before but of capacity 10 to 20 HP, 3 phase 415 volts AC supply complete all as specified and directed .

All as per Ser item No 97 here in before but of capacity 3 to 5 HP, 3 phase 415 volts AC supply complete all as specified and directed .

All as per Ser item No 97 here in before but of capacity 1 to 2 HP, 3 phase 415 volts AC supply complete all as specified and directed .

M&L disconnecting/dismantling , strip opening and overhauling of pumping set of any make and capacity of 75/100 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes,tyre coupling,slip, impeller grinding, rusted nut bolts and washer,seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed .

All as per item No 102 here in before but of capacity 30 to 45 HP, complete all as specified and directed .

All as per item No 102 here in before but of capacity 10 to 15 HP, complete all as specified and directed .

All as per item No 102 here in before but of capacity 5 to 7.5 HP, complete all as specified and directed .

S&F in repair Star Delta Starter,fully automatic, suitable for 15 HP, 415 volts complete all as specified and directed.

S&F in repair Star Delta Starter, fully automatic, suitable for 30 HP, 415 volts complete all as specified and directed.

S&F in repair Star Delta Starter ,fully automatic, suitable for 125 HP, 415 volts complete all as specified and directed.

M&L for dismantling existing foundation alongwith angle iron frame work after taking down motor pump and providing new foundation with PCC 1:2:4 type B-1 and angle iron frame as per existing size & dimensions including placing motor pump by grouting with nuts & bolts of required size and numbers complete all as specified and as directed.

S&F in repair HDPE pipes of dia 110mm ,conforming to IS- 4984/95, PE-100 and maximum permissible working pressure 1.00 Mpa or 10 Kgf/cm2 complete all as specified and directed.

S&F in repair HDPE pipes of dia 50mm ,conforming to IS- 4984/95, PE-100 and maximum permissible working pressure 1.00 Mpa or 10 Kgf/cm2 complete all as specified and directed

S&F in replacement DOL starter, push button type, suitable for 7.5HP, 3 phase 415 V,AC electric motor complete all as specified and directed.

S&F in replacement DOL starter, push button type, suitable for 3HP, 3 phase 415 V,AC electric motor complete all as specified and directed.

S&F in repair of power contactor 4 pole with AC coil, 415 volts, 50 Hz, suitable for 100/125 HP motor starter with all connections complete all as specified and directed.

S&F in repair of power contactor 4 pole with AC coil, 415 volts, 50 Hz, suitable for 30/40 HP motor starter with all connections complete all as specified and directed.

S&F in repair of power contactor 4 pole with AC coil, 415 volts, 50 Hz, suitable for 10/15 HP motor starter with all connections complete all as specified and directed.

S&F in repair of power contactor 4 pole with AC coil, 415 volts, 50 Hz, suitable for upto 7.5 HP motor starter with all connections complete all as specified and directed.

Supply ,fixing, testing and commissioning of digital type water level indicator system to indicate minimum five level of water with LED's and alarm at 100% level of water in RCC Overhead reservoir at approx 18 mtr to 21 mtr height and UG sump including wiring from level sensor inside over head tank or UG sump to display panel on ground level up to 20 meter as required at site complete all as specified and directed.

S&F in replacement 80 mm bore, cast iron, air release valve, flanged type with two air out lets including jointing with nuts, bolts, washers and rubber sheet etc complete all as specified and directed .

S&F CI/DI fittings upto 300mm bore pipe line for reducing/ Bends (any type, radius and angle) tapers any type,(straight, bend, increasing,decreasing or double socket etc.)Tee pieces single branch. "Y"junction, double branch, cross(all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

Supply only Aquafit (Calcium Hypo chlorite) 65% - 70% chlorine content (Calcium based) granular desinfectant for water treatment plants packed in 45 Kg drum confirming to the relevent IS (ISI marked) complete all as specified and directed. Notes : (i) RV shall be prepared for supply & consumption duly verified by audit authority. (ii) The contractor shall produce PV & test certificate of Aquafit (Calcium Hypo chlorite) .

M&L for repair/rewiring of motor starter of any capacity including connection with motor by new copper lugs and testing of motor at site complete all as specified and directed.

Taking proper shut down in writing, disconnecting all the electrical connections, dismantling the motor from the base plate and transporting the same for repair to workshop for rewinding, dismantling the motor/rotor, cutting and removing the old heated up/burnt winding of the stator/rotor, cleaning the slots,bearing,bushes etc ,rewinding the motor stator/rotor with super enameled copper winding wire of existing size , gauge and turns etc including all the insulating materials ie.varnish ,china glass paper,'F' class paper, insulating paper etc and transportation back the same after winding ,reassembling at original position and testing complete of electric motor upto 10 HP,3 phase,415 volts,AC supply all as specified and directed . Notes:- (a) The contractor shall return the motor within week’s time after handing over for repairs to contractor otherwise a penalty of Rs. 1000/- per day will be charged from the contractor. (b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, nuts bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (c)The contractor shall arrange a visit of Engr-in-Charge to workshop for each job and cutting of complete burnt winding of motor shall be done in presence of Engr-in-Charge. Note :- A Sum of Rs. 1,42,695.00.00 will be deducted on account of credit for dismantling/demolished/taking down material. Please refer detail on srl page No 26 & 27 (Schedule of credit) of Tender Documents.

NAV DURGA CONSTRUCTION CO

M/S BSS AND SONS