CA NO GE S U 25 2022 23 REPAIR TO JOINERY FLOORING CEILING PLASTERING SANITARY FITTINGS AND ALLIED SERVICES AT NC PRO UNIT 297 MED REGT SAPPERS AND GOLF VIEW 10 EW BN GE P 574 ENGR PARK B MESS C MESS AND MES GURUDWARA MD OTM ACCN UNDE GE SOUTH UDH

Amount

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n.exc 4 sqm each and making good the disturbed plastered surfaces with 10 mm thick plaster in CM 1:6 and final finish as per existing complete all as specified and as directed.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each and making good the disturbed plastered surfaces with 10 mm thick plaster in CM 1:6 and final finish as per existing complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed.

All as per item 3 above but n exc 1.5 Sqm each complete all as specified and as directed.

Refixing of shutter of any description exc 1 sqm and n.exc 2 Sqm in same opening complete all as specified and as directed.

Refixing of shutter of any description n exc 1 sqm in same opening complete all as specified and as directed.

2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and as directed.

Dismantling structural steel any description including door steel gates etc complete all as specified and as directed.

Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm thick plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling, of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified, directed and shown in the relevant SSR

Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm including bottom of each chowkat complete all as specified and as directed.

Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm including bottom of each chowkat complete all as specified and as directed.

35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and as directed.

Supply and fixing 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I; supplied and fitted to chowkats complete all as specified and as directed.

Flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels but one face is covered with decorative laminate face veneer with lipping complete all as specified and as directed. Make : Century Plywood/Kit Ply/Archidply or equivalent

Supply and fixing 30 mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bed blocks for hold fasts including necessary form works complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in filling of pressed steel door frame complete all as specified and as directed.

Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 290 Gde E165 complete all as specified and as directed.

Supply and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repairs 100mm size butt hinges, medium weight, cold rolled complete all as specified and as directed.

Supply and fixing in repairs 75mm size butt hinges, medium weight, cold rolled complete all as specified and as directed.

Supply and fixing in repairs 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing in repairs 75mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing in repairs 100mm powder coated aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing in repairs 100 mm door handle, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing in repairs 75mm door handle, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F in repairs Mortice lock, brass, vertical type, size 100 mm 4 levers with 02 Nos keys complete all as specified and as directed.

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 50mm long, articles n.exc 200 Cu cm each of Ist class soft wood complete all as specified and as directed.

300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and as directed.

5.5 mm thick sheet glass ordinary quality and glazing with rubber beading exc 0.5 Sqm each pane complete all as specified and as directed.

Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 Sqm in each pane complete all as specified and as directed.

Supply and fixing 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n.exc 0.50 sqm complete all as specified and as directed.

Material and labour 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in pelmet box with nails to timber frame work in repair complete all as specified and as directed.

S&F in repair pre-laminated particle board of 18/19mm, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work complete all as specified and as directed.

S & F in repairs 0.90mm Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

6 mm thick teak wood lipping to 12 mm thick particle board complete all as specified and as directed.

6 mm thick teak wood lipping to 18/19 mm thick particle board complete all as specified and as directed.

100 mm size Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs continuous (piano ) hinges ,mild steel, bright finish or electro galvanised width of flap 30 mm complete all as specified and as directed.

S&F in repairs 40 mm dia cub board knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6. but except bricks complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified and as directed.

All as per Srl item No 54 above but except stones complete all as specified and as directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.

Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed.

Material and labour for preparation of new plastered wall surfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed.

Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed.

Preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and as directed.

Preparation of old decorated surfaces of wall by complete removing of existing treatment and applying roller application two coats Oil bound distemper including applying with 3 mm thick wall care Putty over a coat of primer of surfaces filing or cracks, holes on wall by putty etc complete all as specified and as directed.

S & F in repairs 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. Make Saint Gobain or equivalent

S & F in repairs double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and as directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified and as directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fixing powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed.

Supply and fixing powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.

Rubber beading to aluminium window/doors of best quality for securing glass panes including removal of glass from the existing aluminium frame carefully and refixing in the same opening complete all as specified and as directed.

Plain Fillets n.exc 3 sq.cm of 2nd class hardwood in Square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

Solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified and as directed. (Make :- Gareware or equivalent)

S & F in repair 0.71 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in crumple joint, ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Material and labour for greasing of all parts of steel rollings, gear operated or manual operated shutter, at any height, including guide channels and replacement of weared parts, springs, laths etc, crank handle, bearings, crank shaft etc suitable sizes including any welding required (replacement parts measured seperately) complete all as specified and as directed.

Providing and fabricating mild steel 1. 0 mm thick black sheet as in top cover of rolling shutter fixed to wall in proper size ,shape & position suitable for rolling shutter complete all as specified and as directed.

S&F in repairs MS spring for rolling shutter size of spring 300mm long inner dia not less than 65 mm and MS wire 6mm complete all as specified and as directed.

All as per item No 77 but size of spring 450 mm long inner dia not less than 65mm and dia of MS wire 8 mm complete all as specified and as directed.

S&F in repairs MS pipe heavy duty of 40 mm dia as in shaft of rolling shutter complete all as specified and as directed.

Lath section formed from cold rolled strip 1.25mm thick and width as required complete all as specified and as directed.

S&F guide channel 25mm width, depth of channel 65mm not less than 1.0mm thick as required complete all as specified and as directed.

S & F in repair Mild steel 125mm handles for steel window, stove enamelled black complete all as specified and as directed.

S & F in repair Mild steel peg stay for steel window, stove enamelled black complete all as specified and as directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item No 84 as above here in before but without glazing bar complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing ) and rubbish off the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

75 thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

25mm thick PCC 1:2:4 type B-0 (using 20mm graded crushed stone aggregates) as in sub base for laying floor finishes complete all as specified and as directed.

Material and labour joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item No 94 above but in vertical surfaces over 10 mm thick back coat in CM 1:3 complete all as specified and as directed.

Coloured glazed ceramic tiles (300mm x 600mm x 7mm/ 450mm x 300mm x 7mm thick ) set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments in vertical surfaces over 10 mm thick back coat in CM 1:3 complete all as specified and as directed.

Vitrified Ceramic double charged coloured tiles dark shade 10 mm thick double charged (square/rectengular) polished, area of each tile exc 0.36 sqm but n.exc 0.42 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Vitrified Ceramic double charged coloured tiles light shade 10 mm thick double charged (square/rectengular) polished, area of each tile n. exc 0.36 sqm as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10mm thick screed bed in CM 1:3 complete all as specified and as directed.

Durastone heavy duty vitrified tiles 10 mm thick Square/rectangular tiles area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Pre-glazed cloured chequered glossy finished cement concrete tiles 300mm x 300 mm x 20 mm thick, machine pressed; set, jointed and pointed in neat cement slurry, with grey cement and pigment in floors over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated sheets 0.60 mm thick of any colour having tensile strenght of 550/MPa as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

All as per Srl item No 109 above but plain sheets as in ridges complete all as specified and as directed.

6mm thick asbestos cement corrugated sheets as in roof covering fixed with L or J hooks complete all as specified and as directed.

All as per item No 111, above but fixing only complete all as specified and as directed.

6mm thick 2 piece serrated ridge for corrugated or semi corrugated sheets fixed with L or J hooks complete all as specified and as directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed.

AC designer composite ceiling board 4 to 6mm thick in 600mm x 600mm panel confirming to IS-14682 type-B category-3 including powder coated aluminium frame, holdfast & suspenders complete all as specified and as directed. Make- Everest or equivalent

Taking up or down steel tubing 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

All as per item No 116 above but 20mm Bore complete all as specified and as directed.

Steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and as directed.

All as per item No 118 above but 20mm bore complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

Brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and as directed.

Providing, cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cement with WPC at the rate of 3% by weight of cement complete all as specified and as directed.

Material and labour for cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof complete all as specified and as directed.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed. Note :- Water proofing treatment will be done specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat complete all as specified and as directed.

Providing cement concrete in steps, seismic and other similar bands,pad parapating concrete, etc and railings up to 60 cm in hieght, coping, kneelers apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Supply only (LW+) water proofing liquid solution complete all as specified and as directed. Make :- Dr fixit / sikka or equivalent.

Taking down soil / waste and rainwater pipes (any size or pattern) including all fittings and cleaning complete all as specified and as directed.

110 mm bore PVC (SWR) pipe single socketed, in any length with rubber joints fixed to walls complete all as specified and as directed.

75 mm bore PVC (SWR) pipe single socketed, in any length with rubber joints fixed to walls complete all as specified and as directed.

110mm bore PVC (SWR) bend any radius complete all as specified and as directed.

110mm bore PVC (SWR) bend any radius complete all as specified and as directed.

Dismantling water tank of capacity exc. 250 ltr but n.exc. 500 ltr complete all as specified and as directed.

All as per item No 134 above but exc. 500 ltr but n.exc. 1000 ltr complete all as specified and as directed.

Rotational moulded (three layered as per IS 12701) polyethylene water storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR Part -I of capacity 500 litre complete all as specified and as directed. (Make- Sintex /Rotex Five Star)

All as per item No 136 above but 1000 ltrs capacity complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash down water closet pedestal pattern white including trap connections to drain and to flush pipe anti-syphonic pipe etc. complete all as specified and as directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580mm x 440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet including provision of PCC bedding type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) and connection pipes (excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC) complete all as specified and as directed.

Single Lever Basin Mixer without Popup waste and 450mm Long Braided Hoses,Make : Jaquar or equivalent including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs fancy type Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make : Jaquar/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and as directed. Make : Jaquar/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F in repairs 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed. Make Prayag/Parryware or equivalent

S & F 15mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and as directed. (Make Jaquar /Cera or equivalent )

Supply and fixing in repairs health faucet (hand shower) with 1.0 metre long tube with wall hook, chromium plated complete all as specified and as directed.

S &F in repair sheet glass shelf assembly 500mm x 125 mm consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

CP soap dish fancy type chromium plated fixed with brass screws and wooden/plastic cleats complete all as specified and as directed. Make Jaquar/CERA or equivalent make of Prayag Cat Part No BA-05

S&F in repairs CP Towel ring square with round flange complete all as specified and as directed. Make Jaquar/CERA or equivalent Make of Prayag Cat Part No BA-02

S&F in repairs chromium plated Toilet paper holder complete all as specified and as directed. Make Jaquar/CERA/Prayag or equivalent

S&F in repairs 300 mm corner glass shelf with chromium plated rails including brackets complete all as specified and as directed. (Make- Jaquar /Cera)

S&F in repairs 15mm bore wall mounted tap swivel joint with flange cast copper alloy chromium plated screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs Brass CP shower rose 125mm size with arm complete all as specified and as directed.

S & F 20mm bore brass float valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule "as in repair " complete all as specified and as directed.

S & F 75mm bore cast iron floor trap with grating including jointing to waster pipe fixed in cement concrete type B-1 1:2:4 "as in repair " complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches "as in repair " complete all as specified and as directed.

S & F Sand cast iron 'P' or S trap 100mm bore for Ind type W/C complete all as specified and as directed.

Vitreous china urinal, half stall type white (excuding flushing cistern, flush pipe) but including PVC waste pipe, providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified and as directed. Make Parryware/Cera

Supply and fixing in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed. Make Parryware/ Cera

Supply and fixing in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed.

S&F in repair plate rack made of stainless steel 785mm x 760mm x 250mm x 0.63mm including fixing as per manufacturers instruction complete all as specified and as directed.

M/S ASHOK KUMAR PACHIALA

khajuria builders

RAMAN CONSTRUCTION CO