SPECIAL REPAIR TO OFFICERS MARRIED ACCOMMODATION P 225 01 TO 04 AT HAPPY VALLEY UNDER GE I GOS

Amount

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L for Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

M&L for Treatment of soil using emulsion for Post construction Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

M&L for Post construction Anti termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45° @ 150mm centre to centre and sealing the same complete all as specified and directed

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqm, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in skirtings/ vertical surfaces, not exceeding 0.36 sqm, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L Machine cut Kota stone slab flooring 18-20mm thick as in riser, steps & skirting, over cement mortar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing, polishing & rounding to edges complete incl 10mm thick plaster in CM 1:4 complete all as specified and directed.

Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc all as specified and directed.

M&L preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drawing SSR Part-II 2020 complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II 2020 complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)

S&F in repairs 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including magnetic catcher wherever required as Cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.

S&F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S&F 50 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 complete all as specified and directed

S&F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F Hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

M&L Second class hard wood (Sal) plain, solid, straight chowkhat & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed.

M&L Second class hardwood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S & F 35 mm thick second class hard wood rail and style plain, framed, factory made panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stiles are as per IS – 1003 (Part – I), kiln seasoned & chemically pressure treated complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Aluminum alloy anodised sliding door bolts with hasp & staple (Bolt type) and fixing clips of sheet, cast extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed..

S&F Floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered walls surfaces making absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair Stainless steel fancy type curtain rod 25 mm dia including side holder and brackets as approved complete all as specified and directed

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in fixed completed all as specified and directed.

S&F 5 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 5 mm thick sheet glass ordinary quality and gazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F 1000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old u/s water tank and removing to store complete all as specified and directed.

S&F Ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply complete to walls, ceilings or in floors complete all as specified and directed.

S&F in repair PP-R globe or gate valves screwed both ends for PPR Pipes of 20 mm bore dia of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or alumnised hinging device complete all as specified & as directed.

S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified & as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.

S & F in repair 15 mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair Stainless steel and Soap dish, with fancy type fixed with brass screws mm complete all as specified and directed.

S & F in repair Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair Angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

Demolition of Reinforced Cement Concrete in of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs, Platforms etc and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(WPC will be paid separately)

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering, slightly rounded or chamfered angles and throating including necessary form work etc all complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with CP grating, jointing with solvent cement as per site requrement all as specified and directed.

Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore with access door complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore without access door complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.

M&L Vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.

S&F in repair of Stainless steel kitchen plate rack of size 900x900x250mm complete all as specified

S&F in repair Bib taps 15 mm bore, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repair Bottle trap chromium plated for WHB as per approved quality all as per specified and directed.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed.

S&F in repair Toilet Paper Holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair Mild Steel Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed.

S&F in repairs CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm

(ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed.

(iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.

(iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/ kerbs/ sunken slab etc complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately).

S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair 100 mm fancy type SS handle for kitchen cabinets, Cup boards and Crockery Shelves, Drawers fixed with not and screw complete all as specified and directed.

S&F in repair stainless steel of AE-SS 316 Grade Tubular Towel Ring including pair of CP Brass Brackets complete all as specified and directed.

S&F in repair 15mm dia chroium plated miser for mising hot and cold L bend 3-in-1 pattern fixing and connecion to pipes complete all as specified and directed

S&F 4mm thick pin headed glass panes for louvers and ventilators complete all as specified and directed.

S&F in repair 7mm thick aluminium grill of make Decogrill model DG 104 surrounded by aluminium’C’ channel with mesh size 75 x75 mm all as specified and directed

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

M&L for Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe com plete all as specified and directed.

M&L for salt glazed stoneware (SGSW) drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed in CM 1:1 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L in repairs salt glazed stone ware gully traps size 150 x 150mm, square or round mouthed, type ‘P’ including setting and jointing to drains with CM 1:1 including demolition of existing traps complete all as specified and directed. (Note: CI grating will be meaured separately).

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without andulations complete all as specified and directed.

Material and labour for one light point controlled by one switch, point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 unsheathed, multi stranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc flush mounting MS box with top, bottom, side / back wall knockout for conduit entry from any direction made out of 1.60mm thick, suitable for fixing of and including white / silver / Dark bronze colour modular blanking plate as per number of switch modules for fixing of modular switches, sockets, fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including with inner frame suitable as per switch modules and including PVC 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box, top cover plate, inner frame, blank plate, GI sunken boxes, screws, washers and all modular electrical fixtures are used same make/brand only) Make for item No 2 to 10 :- (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab (2) PVC conduit (MMS)/PVC Casing & Caping & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd

All as per item No.148 above, but one fan point controlled by one switch and one regulator.

All as per item No.148 above, but one exhaust fan point controlled by one switch

All as per item No.148 above, but one 5 pin 6 amps socket point controlled by one 06/10 amps switch on independent board .

All as per item No.148 above, but one 5 pin 6 amps socket point controlled by one 06/10 amps switch on same board .

All as per item No.148 above, but one bell/buzzer point controlled by onebell push.

All as per item No.148 above, but one light point controlled by 2 way Switches.

All as per item No.151 & 152 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for one 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent boardcomplete all as specified and directed .

All as per item No.151 & 152 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for one 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.151 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type full flat switches with indicator, 10 Amps, single pole, 1way,1 module, 240V, AC, ISI Marked complete all as specified and directed. (Make :- Crabtree code No CMSPXW101 or equivalent in Legrand / Schneider

Supply & fixing modular type full flat switches with indicator, 10 Amps, single pole, 2way,1 module, 240V, AC, ISI Marked complete all as specified and directed. (Make :- Crabtree code No CMSPXW102 or equivalent in Legrand / Schneider

Supply & fixing modular type bell push 10 Amps, 1 module single pole, 240V,with embossing bell simble & indicator, ISI Marked complete all as specified and directed.

Supply & fixing modular type full flat switches with indicator, 16/20 Amps, single pole, 1way,1 module, 240V, AC, ISI Marked complete all as specified and directed. (Make :- Crabtree code No CMSPXW101 or equivalent in Legrand / Schneider)

Supply & fixing modular type socket with shuttered type 6/10 Amps, 2/3 Pin combined 2 modules, 240V, AC ISI Marked complete all as specified and directed. (Make :- Crabtree code No ACUKXW063 or equivalent in Legrand / Schneider)

Supply & fixing modular type socket with shuttered type 16/20 Amps, 2/3 Pin combined 2 modules, 240V, AC ISI Marked complete all as specified and directed. (Make :- Crabtree code No ACUKXW253 or equivalent in Legrand / Schneider)

Supply & fixing modular type step fan speed regulator 120W, 2 module, 230volts, AC, 360 degree rotation 0 to 8 steps, ISI Marked complete all as specified and directed. (Make :- Crabtree code No ACURFHB008 or equivalent in Legrand / Schneider)

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed. (Make :- Crabtree code No ACUIIIW060 or equivalent in Legrand / Schneider)

Supply & fix call bell AC, 230Volts single pole, multi music type best and superior quality, ISI marked as approved type complete all as specified and directed.

Supply & fix angle lamp holder insulated body with back plate for batten fittings latest model complete all as specified and directed. (Make :- Crabtree or equivalent in Legrand / Anchor / Havells)

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed. (Make :- Crabtree or equivalent in Legrand / Anchor / Havells)

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design, extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficiency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. (Make:- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton / Philips)

Supply and fixing LED 20 watt, 6500K, Pride plus inverter batten, decorative type light fitting white lighting, with square profile and polycarbonate channel, lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design, extruded aluminium housing enhances safety, high quality PC diffuser, easy to install, efficiency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. (Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips)

Supply and fixing 20 watts LED Austra mirror smart light fitting one feet long, contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install, PC diffuser, high quality materials, pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. (Make:-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips)

Supply and fixing 20 watts LED batten nicolas glamtube integrated design, easy to install, efficiency 125lm/w, PC diffuser and robust housing high quality materials, pre-wired including providing PVC round / PVC square blocks -02 Nos and connected with LED fitting to celling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. (Make:- Havells ordering code.LHEWAJPGPV1B020 or equivalent make in Crompton / Philips)

Supply and fixing 36 watts LED supernova light fitting high wattage complete LED lighting with high lumen output, environmental friendly, energy efficient, integrated design. easy to install, PC diffuser and robust housing, high quality materials, pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. (Make: - Havells ordering code.LHEWAJPGPV1C036 or equivalent make in Crompton/Philips)

Supply and fixed in repairs LED bldg security light fitting of capacity 45 Watt LED street ight fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose / looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:- Havells cat No.LHETACU7PA7J045 OR equivalent make in Crompton / Philips as approved

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners, nuts, bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. Make of GI pipe:- Jinadal/Tata/Surya Prakash

Supply and fixing decorat1ve LED 9 watt decorative, globe type, high quality polycarbonate materials suitable for 9 watt LED Iamp B22, 220 Volts AC with high efficiency, soft glare iree nght complete with L.ED lamp, holder suitable for wall surface and connected with LED lifting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make:-Havelis Cat No. LHFOGBE1TZ1WO35 or equivalent make in Crormpton/Philips.

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. HEXAFT10WLED857SSYMBOPC or equivalent make in Crompton/Philips

Supply and fixed energy saving, environmental friendly long life aesthetic consistency in multipurpose application with SiviD LEDS as light source with driver included, suitable for highlighting architural features or area lighting, light fitting of capacity 60-70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:- Havells cat No.JETAQUANTOPLUSFLP60WLED757SYMLENS or equivalent in Crompton / Philips any approved make

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way, 8+12 modules, flush mounting with 200amps copper busbar, 2 neutral / earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5077 30 4 way or equivalent make in Hagar/Schneider. Note for item No.22 to 32- MCCBIMCB DBs and MCBs/MCCBs both are used same make only

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC, SPN, DB, 8 way, flush mounting with 100amps copper busbar, neutral bar, earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection and including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells

Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 12 way for flush mounting with 100Amps copper busbar, neutral bar, earth bar suitable for MCB incomer of rating upto 100Amps, MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat No. 5076 22 12 way or equivalent in Hagar/Schneider

Supply and fix mini MCB,32 A,DP 'C and motor starter including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliances including protection and including removing old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. (Make: - 32A C DP Mini MCB Crabtree code No.DCVNCDPA032, 32A Motor starter Crabtree code No. ACVSMXW321or equivalent in Legrand / Schneider)

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply 8& fix and MCB SPN 40 to 63 Amps 10 KA,"C" series, AC, 240Volts, 50Hz ISI marked and including removing old unsv items complete all as specified and directed. Make:- Legrand/Hager/Havelis or as approved make

Supply and fix MCCB, 100 Amps,4 pole 415 Volts, 16/18KA thermal magnetic type with necessary lugs, thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed. Make:- Legrand / Hager/Havells or as equivalent approved

M &L for sub main wiring complete with 2 run of 10 sgmm single core copper conductor (ISI marked) cable 1100 volts grade, ISl marked, FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend, Tee, Elbow, Short peices etc concealed in wall/roofs/floors and including one run of 10 sgmm single core copper conductor cable flexible, PVC insulated, unsheathed, multi stranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sgmm single core copper conductor cable and one run of 10 sqmm Single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked, FRLSH type (conforming to IS-694 / 1990 as amended) PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend, Tee, Elbow, Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M&L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, ISI marked, FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend, Tee, Elbow, Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multi stranded, 1100 volts grade, ISI marked, FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note:- Two run of 4 sqmm singie core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit Make for item No 34 to 36- (1) PVC Copper conductor cable FRLSH type -Finolex / Havells / RR Kabel / Polycab.(2) PVC conduit (MMS)/PVC Casing & Caping & Accessories IS! Marked:- Presto Plast/ Finolex/ Kalinga Gold/ Plaza/ AKG Plastics Pvt Ltd

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed. Make:- Legrand / Hager/ Havells or as equivalent approved make

Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 1200mm sweep brushless direct current smart and decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit, LED down lights, metallic finish dust resistant and connected accessories, Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current copper winding motor, colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paint complete all as specified and directed Make:-Atomberg (Renesa) or equivalent in Havells/Orient as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with blades and frame, with louvers complete all as specified and directed complete all as specified and directed. Make:- Havells ventil Air DB SKU Code-FHWEMTDBB12 or equivalent in Orient/ Kaithan as approved make.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz, rpm 1200 copper winding of sweep 250 mm. Make- Havells ventil Air DX SKU Code:-FHVWEDXOWH10 or equivalent in Orient / Kaithan as approved make

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos, holefasterns 04 Nos and necessary accessories as per site requirement etc. complete all as specified and directed. Make:-Havells Fabia SP SKU Code:-GHWAFATWBO25 whiteblue or equivalent in Orient/ Kaithan as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh, including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing smart electric meter single phase four wire energy meter as per BIS -16444 2015 (Reaffirmed 2020), ISI marked in existing board/floor panel having current range 10-60 Amps, 240 Volts, accuracy class 1.0 and including providing necessary items for functioning complete all as specified and directed.

Supply and fix in repairs thermoplastic box of size 217 mm X 253 mm X115 mm(L X BX H) confirming to IP -65 with transparent lid hinged door, mounting plate, DIN rail with fastening screws and other necessary accessories complete and fixing on wall for housing KHW meter compete all as specified and directed by Engineer-in-charge. Make:- Hensel, cat No.KG 9003 or equivalent any ISI Mark

S&F for PVC non-metallic rigid conduit incl boxes, junctions boxes 1 to 4 way & terminals but incl of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles, pipes hookes etc ISI marked heavy duty of size 20/25mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed. Make of PVC conduit (HMS)/ & Accessories ISI Merked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd

Supply and fixing TV sockets one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed. Make:-Havells (crabtree) or equivalent in any approved make.

Supply and fixing Telephone socket(RJ11) one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed. Make:-Havells (crabtree) or equivalent in any approved make.

M/S SIWALIK AND CO

M/S S.K GHOSE

R K Traders

M/s Bapujee Builders and Traders

V.Venkata Ramaiah

DHABALESWAR ENGINEERING WORKS

M/S. KISHAN ENGINEERING