Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAccepted-AOC PLOT NO 76 CIV SOCIETY MUKUND NAGAR AHMEDNAGAR 414001 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414001 | L1 | Accepted-AOC Awarded Being Lowest Bidder | |
| 2 | L2₹27.8 L+₹1.6 L (6.05%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹28.1 L+₹1.9 L (7.14%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹29.1 L+₹2.9 L (11.0%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹29.8 L+₹3.6 L (13.9%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Comprehensive Repair / Maint works for Md JCOs / ORs Accn at JK Road and FAFA Qtrs in the area of AGE B/R I under GE (N) Ahmednagar.
2022_MES_534315_1
8654 / E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer North Ahmednagar
₹60,000
Yes
5 Aug 2022
28 Jun 2022
1 Aug 2022
28 Jun 2022
30 Jul 2022
11 Jul 2022
Amount
Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortar etc complete all as specified and directed by Engineer-in-Charge
Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge
Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge
Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge
Material and labour for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiels etc complete all as specified and directed by Engineer-in-Charge
Material and labour for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
Material and labour for light shade vitrified ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tile exc 0.11 Sqm but not exceeding 0.38 sqm, in floors etc. laid over and including 15 mm thick screed bed in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
All as per item No 08 (here-in-before) but as in skirting laid over and including a backing coat 10mm thick cement and sand mortar (1:4)
M&L for machine cut kota stone slab florring 20-25 mm thick laid over and including 15 mm thick screed bed in cement and mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing etc complete all as specified and directed by Engineer-in-Charge
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed in cement and sand mortar (1:4) and jointed with cement slurry mixed with pigment to match the shade etc complete all as specified and directed by Engineer-in-Charge
Material and labour in repairs for granite slab, 18-20 mm thick laid over and including 15 mm thick screed in cement and sand mortar (1:6), jointed and pointed with coloured cement to match on kitchen platform and shelves including grinding and polishing the exposed edges etc complete all as specified and directed by Engineer-in-Charge
Material and labour machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and directed by Engineer-in-Charge
Demolition of plain cement concrete solid block /brick masonary built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge
Material and labour for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge
Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement all as specified and directed.
Material and labour for rendering, 10 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge
Dismantling of plain or corrugated steel sheeting and asbestos cement (corrugated semi corrugated) any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting of any colour, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs vitreous China white wash down water closet pan (pedastal pattern) including plastic water closet seat (black), closed pattern with flat bottom and cover, aluminium hinged device, connecting to 'P' or 'S' trap, flushing and ante syphonage pipe etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern,low level including all accesories etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge
M & L for Complete removal of existing treatment on plastered surface and applying 2 mm thick wall care putty (birla) including crack filling and applying two coats of Oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint on wall/roof etc complete all as specified and directed by Engineer-in-Charge
M&L for Preparing old painted surfaces of wall and applying one coat of cement paint etc complete all as specified and directed by Engineer-in-Charge
M&L for preparation of newly plastered / unplastered surface and applying three coats of white wash on wall etc complete all as specified and directed by Engineer-in-Charge
M&L for preparation of new plastered / unplastered surface and applying three coats of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge
Taking down chowkhats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge
Taking down shutter exceeding 1.00 sqm but not exc 2 sqm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-Charge
Material and labour for filling in door frames in plain cement concrete, (1:2:4) type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge
M&L for Welding in repairs n. exc 2.5cm in length and thickness of metal to be welded up to 6mm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix Flush shutters, solid core construction, with block board core and plywood face panels, commercial. kiln seasoned if one face is covered with decorative face veneer with lipping/frame to match the shade etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 35 mm thick skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2 mm prelam PVC Sheet on back face as an Doors and cupboard shutter etc complete all as specified and directed by Engineer-in-Charge
Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres and removing old beads etc complete all as specified and directed by Engineer-in-Charge
Taking down aluminium doors / windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.
S&F in repars concealed star lock powder coated for aluminium window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. etc complete all as specified and directed by Engineer-in-Charge.
S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.25 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified (Note : Glass will measured and paid separately)
S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.25 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass will measured and paid separately)
M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge
Supply and fix galvanised mild steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge
Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge
Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair stainless Steel 25 mm dia curtain rods with fixing brackets etc complete all as specified and directed by Engineer-in-Charge
Dismantling boarding, any description, fixed in wall or ceiling, any position with nails etc complete all as specified and directed by Engineer-in-Charge
S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions etc complete all as specified and directed by Engineer-in-Charge
M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved by GE fixed or laid/inserted to timber/GI/Aluminium frame work with etc complete all as specified and directed by Engineer-in-Charge
Supply & Fix in repair health faucet with 8mm dia, 1.00 mtr flexible tube wall mountained / hooked etc complete all as specified and directed by Engineer-in-Charge
Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc complete all as specified and directed by Engineer-in-Charge
All as per item No 62 (here-in-before) but 110 mm dia
Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc complete all as specified and directed by Engineer-in-Charge
All as per item No 64 (here-in-before) but 110 mm dia
S&F 110 mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge
S&F 75mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge
Supply and fixed in repairs stainless steel kitchen sink matt finish with draning board over all size 915 x 510 mm and bowl size 510 X 405 X 200 made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge
Supply and fixed in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 405mm x 200mm made out of SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position etc complete all as specified and directed by Engineer-in-Charge
All as per item No 70 (here-in-before) but 20mm dia pipe.
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge
All as per item No 72 (here-in-before) but 20mm dia pipe.
S&F in repair wall mixture, 3-in-1 with provn for both telephonic shower /over head shower etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs bib tap, 15 mm dia, cast copper alloy chromium plated fancy type with capstan head screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs, stop valve, 15 mm dia, cast copper alloy, chromium plated, screwed down high pressure with capstain head screwed both ends for iron pipe or for unions etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge
Supply & fix in repairs brass cromium plated shower rose 125mm size etc complete all as specified and directed by Engineer-in-Charge
S&F in 5.5 mm thick shelves in corner with chamferred edges including connected brackets etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs decorative towel ring chromium plated 150 mm dia fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs tubular towel rail CP 20mm dia C type 60cm long both flanges brass chronum plated etc complete all as specified and directed by Engineer-in-Charge
M&L for PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs looking mirror of size 600 - 700mm X 450 - 500 mm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs PVC Taps 15mm dia with capstan head screwed down for iron pipe or for brass ferule etc complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness size,quality or description) from wooden/steel frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.
Material and labour for glazing with 3 mm thick plain sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge
S&F in repair rim latch 100mm with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed etc complete all as specified and directed by Engineer-in-Charge
Dismantling of water tanks from any position/location, of any make etc of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve etc complete all as specified and directed by Engineer-in-Charge
S&F rotational molded polyethylene water storage tanks double layer(cylindrical vertical with closed top) of 500 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting including taking down old water tank etc complete all as specified and directed by Engineer-in-Charge
All as per item No 89 (here-in-before) but 1000 ltrs etc.
M&L for disconnecting existing tanks of any capacity setting aside (or lowering if required for repairs, cleaning dirt etc. and hoisting if required reconnecting and re-fixing in position etc complete all as specified and directed by Engineer-in-Charge
S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe etc complete all as specified and directed by Engineer-in-Charge
S&F in repair stainless steel plate rack 0.63mm thick sheet for kitchen ( Size 610x 610x 254mm) etc complete all as specified and directed by Engineer-in-Charge
Material and labour for special treatment ot sunken portion with 10mm thick plaster in cement and sand mortar (1:4) with WPC liquid complast 421 and applying one coat each of Nittoproof 120 on plastered surface rendering again 10mm thick in cement and sand mortar (1:4) mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.
All as per Item No 94 (here-in-before) but for kitchen area n exc 0.50 sqm on plan etc complete all as specified and directed by Engineer-in-Charge
M&L for filleting in any position and any shape in cement and sand mortar (1:4) including mitered stop etc sectional area of fillets not exc 10 Sqcm as in for dado/ skirting top.
Material and labour for providing water proofing treatment on roofs as per latest zonal specification , as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.25 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts with white gravel/mineral finished by thermofusion process.
M & L for Plastering 10 mm in cement and sand mortar (1:3) using 100% course sand on roof mixed with & including M & L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge
S&F for rolled mild steel in trusses (framed), trussed, purlins, (beam, tee, angle) channel or flat sections including distance pieces, cleats etc, with Fe 410-W (Gde E-250) quality -B etc complete all as specified and directed by Engineer-in-Charge
Dismantling of single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed by Engineer-in-Charge
Dismantling of battens for tiles, shingles etc, of any size including tilting fillets spaced exc 15 cm etc complete all as specified and directed by Engineer-in-Charge
M&L second class hardwood clean swan battens at 30 cm centres, section area exc 5 & n.exc 15 Sqcm etc complete all as specified and directed by Engineer-in-Charge
M&L for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry etc complete all as specified and directed by Engineer-in-Charge
All as per item No 103 ( here-in-before) but except tiles
M&L Ridge or hip tiles to suit, Mangalore Pattern of roofing tiles, bedded and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
An amount of Rs 59,424.00 shall be deducted from BOQ on account of schedule of credit
Priyadeep Construction
Ms. M.D. Auty
M/S-B.R.SONAWANE
M/S. M. F. Sharif & Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .