Certain repairs to plumbing, sanitary fittings, sunken treatment and other connected items to followers quarters at B Mess and Vindya vihar under GE (AWC) Mhow.

Amount

M & L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:4, incl dismantling floor, hearth or wall tiling all as specified and directed

Taking Down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing in same opening after rapair the shutter complete all as specified

M&L for glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4, incl dismantling floor, hearth or wall tiling complete all as specified and directed.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Descrption same as per Item No. 4.00 but as in riser of steps, skirting, dado and vertical surfaces including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement incl necessary use and waste of form work complete, & incl demolition of PCC complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 500 ltr but not exc 1000 ltr, complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 25mm-455 gms.) complete all as specified and directed.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC brass elbow (3/4" X ½") for 20 mm outer dia CPVC pipe complete all as specified and directed.

S & F of CPVC brass tee for 20 mm outer dia pipe complete all as specified and directed.

S & F of CPVC brass tee for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 20 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Tank Adaptor for 20 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Tank Adaptor for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC union for 20 mm outer dia pipe complete all as specified and directed.

S & F of CPVC union for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Ball Valve for 20 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Ball Valve for 25 mm outer dia pipe complete all as specified and directed.

S & F in repairs 15 mm bore bib taps long body, chromium plated fancy type cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs stop cock/ angle Scock 15 mm dia fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.

S & F in repairs 10 litres capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of PVC 32 mm dia and connection to pipes complete all as specified and directed.

S & F in repairs vitreous china squatting pan 'Orissa patern' size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, etc complete including making good to floor

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to 15mm dia steel pipe for required length or union, complete all as specified and directed

S&F Stainless steel peg set having 06 Nos. spikes fixed to wall complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each and removal from site ,all as specified and directed

Taking down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each incl removal from site all as specified

S&F factory made Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes of 19 gauge thick & size 19mmx19mm for stiles and 15mmx15mm for top & bottom rails. M.S. frame shall have a coat of red oxide primer of approval make and shall be covered with 5 mm thick heat moulded plain colour PVC ‘C’ channel of size 30x50mm forming stiles and 5 mm thick wide pvc sheets for top rail ,lock rail and bottom rail on either side and 10 mm (5mmx2mm) thick having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30 mm widex5 mm thick pvc ,sheet suitable PVC sheet beading, and joined together with solvent cement on either side,and additional 5 mm thick pvc stripes of 20 mm width is to be struck on interior side of "C" channel using pvc solvent adhesive complete at site as per specification complete all as specified and as directed.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

M & L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mass concrete incl demolition of cement concrete of any description and any position complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:3 mixing with integral water proofing compound as per manufacturers instruction on concrete/brick surfaces, finished even and smooth without using extra cement all as specified and directed. (Note:WPC will be measured and paid separately)

M & L for apply one prime coat acrylic polymer modified water proofing coating (Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-(1) . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. (2). A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. (3). The rate quoted by the contractor shall include all the provision mention in this item including notes.

M & L Plastering 15 mm thick with WPC in Cement Mortar 1:4 on brick wall/cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement incl taking down of cement plaster any description on brick or stone wall, complete all as specified and as directed. (WPC will be measured and paid separately)

Supply only liquid water proofing compound all as specified and directed

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat complete all as specified.

M & L rendering 10 mm thick on brick wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement incl taking down of cement plaster any description on brick or stone wall, complete all as specified and as directed.

M & L for preparation of newly plaster surfaces on walls applying two coats of oil bound distemper over a coat of primer including cleaning/ washing floors, etc. complete all as per specified and directed.

S&F in repairs PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls incluidng clamping complete all as specified and directed.

Descrption same as per Item No. 46.00 but bore of pipe 110 mm.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed.

Descrption same as per Item No. 48.00 but bore of pipe 75 mm.

S & F in repair PVC (SWR) nahani trap/floor trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repair SS grating 125 mm dia including joining to nahani trap/ waste pipe complete all as specified.

S & F 110 mm bore PVC(SWR) vent cowl including taking out existing unserviceable cowl complete

Descrption same as per Item No. 52.00 but bore of pipe 75 mm.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal, joints with solvent cement,complete all as specified and directed.

Descrption same as per Item No.54.00 but bore of pipe 75 mm.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape approved by GE,complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

S&F factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thicks, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/ powder coated (base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/sqm) section for external frame 33 x 58 x 0.58mm, glass holding flanges made of polypropylene, sections are to be cut to length, miter joined with corner bracket. The above frame should be fixed to the concrete/ masonary walls by means of selfexpanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-In-Charge complete all as specified and directed. (Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.)

Supply only 4mm th figured glass, pinhead type in squares n exc 0.5 sq. m each pane complete all as specified and directed

Supply only galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specified and directed.

J B CONSTRUCTION AND DEVLOPERS

Jamna Constructions

Ankit construction