EEE-III/RZ/NZ/TC/2021-22/12.8

Amount

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.up to 35 sq. mm

Earthing with GI Earth pipe 4.5longx40mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc (but without charcoal or coke and salt) complete as required.

Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

S/D 2x2.5Sq.mm PVC insulated S/C Copper conductor, wire in existing pole PVC conduit as required.

Supply of 2x6 mm2 XLPE insulated and PVC sheathed unarmoured cable of 1.1KV grade conforming to IS 7098 (1988) part-1 as required.

Fabrication, supply & erection of following size flange mounted hot dipgalvanized octagonal pole made from HT steel plate, window with Full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required i/c Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable length 6 Amp. SPMCB ‘C’ characteristics earth stud cable support clamp suitable for 4 nos. of 4x25 sqmm cable. Logo/name of Manufacturer shall be embossed on the pole Galvanisation as per relevant IS 5.0 Meter height 3 mm thick bottom dia of 130 mm & top dia of 70 mm base plate of size 225 X 225 X 12 mm thick

Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm(L) x 450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, rewinforcement of cold twisted bars of 12 mm dia -960mm long (approx.) - 8 nos.and reinforcement of cold twisted bar of 8 mm dia - 1400 mm (approx.) - 6 nos. (with 150 mm spacing) as required with positioning of foundation bolts 16 mm dia 600 mm long J type i/c 2 nos template anchor plates of size 225mm X 225mm X 3 mm and providing DWC HDPE pipe for cable entry & exit as required for 5 m pole

Fabrication, supplying & fixing class B Galvanised single overhang arm bracket made out of 250 mm long galvanized top tube with cap & 1000mm long 32 mm dia galvanized pipe with tightening bolts etc as reqd.

SITC of 60 watt LED street light luminaire fitted with lens made of pressure die casting aluminium housing & toughened glass cover with following specification as reqd (a) Total system wattage 60 watt +/- 5 % (b)luminaire efficacy >= 100 lumens/watt (c) power factor >=0.95 (d) Protection IP66

Supplying and erection of galvanized D-iron clamps complete with shackle insulator (75 x 90 mm ) GI bolt and nut , washers ,coach screws etc as required.

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd.