BIRED/08/e-NIQ(1st call) of 2025-2026

Amount

For OPD Building Supplying and fixing 415V, 125A, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. (Make : L&T/ Havells/Standard] [PWD/GS Page: D-2 Item: 3/a]

Supply & Laying 1.1 KV 4Cx25 sqmm unarmoured PVC/XLPE flexible copper cable through PVC flexible pipe on wall [Make : Nicco / Havells/Gloster/Polycab / RR] [for meter & SFU loop]

Supply & Laying of PVC insulated sheathed Al / XLPE armoured power cable of 1.1 KV grade 4 Core x 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [Make : Nicco / Havells/Gloster/Polycab / RR] [ From Meter/Change Over Switch to VTPN DB ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-1 Item: 2]

Do..........................Do.........................Do................ 2 Core x 6 sq.mm [ From HTPN DB to Security Light ]

Supplying & Laying of one PVC insulated sheathed Al / XLPE armoured power cable of 1.1 KV grade 3 Core x 10 sq.mm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. [Make : Nicco / Havells/Gloster/Polycab / RR] [ From DB to Pump Room ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-2 Item: 1]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below (i) 4 Core x 50 sq.mm [PWD/GS Page: F-4 Item: 7/c ]

ii) Do..........................Do.........................Do................ 2 Core x 6 sq.mm [ From HTPN DB to Security Light ]

iii) Do..........................Do.........................Do................ 3 Core x 10 sq.mm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. (i) 4 Core x 50 sq.mm [PWD/GS Page: F-5 Item: 8/b ]

ii) Do..........................Do.........................Do................ 2 Core x 6 sq.mm [ From HTPN DB to Security Light ]

iii) Do..........................Do.........................Do................ 3 Core x 10 sq.mm

Supply and fixing 415V. 6 way, Double Door MCCB incomer VTPN DB with IP 42/43 protection, having 125 A adjustable Four pole MCCB as incomer 6 nos 63 A TP MCB (10 KA)as outgoings, concealed in wall after cutting the wall and mending good the damages to original finish including interconnection and terminations with suitable size of copper wire, duly socketed by solderless Copper Socket and neutral link and provision for earthing attachment, as per direction of E.I.C.(Make -Legrand/ABB/L&T /Seimens) [PWD/GS Page: D-11 Item: 15, Page: D-8 Item: 10, Page: D-6 Item: 7]

Supply and Fixing 6 way double door horizontal TPN MCB distribution board with IP-42/43 protection, including 63A, 4 Pole MCB isolator as incomer, 18 Nos 10-32A SP MCB as outgoing concealed in wall after cutting the wall and mending the good damages to original finish including inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make -Legrand/ABB/L&T /Seimens) [PWD/GS Page: D-10 Item: 14, D-5 Item: 6, D-6 Item: 7 ]

S&F 2+16 way double-door SPN MCB Distribution Board with IP-42/43 protection, with 240 V 40 A DP MCB isolator as incomer and 16 nos. 6-32A SPMCB as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.as per GS (Make -Legrand/ABB/L&T /Seimens). [PWD/GS Page: D-10 Item: 14, D-5 Item: 6, D-6 Item: 7 ] [ For Lighting = 3, For Pwr Plug/Computer Brd = 4]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/Finolex/RR/Gloster/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 8 mtr [PWD/GS Page: E - 24 Item: 1 ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/Finolex/RR/Gloster/KEI) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish On board [PWD/GS Page: E-20 Item: 3 ]

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 6/16 A, 3 pin Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc), without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 2 nos. 6 A, 5 pin Modular type plug socket (Brand Anchor Roma/Crabtree/Legrand Mylinc) with separate 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 1 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 5 pin Modular type plug socket (Brand Anchor Roma/Crabtree/Legrand Mylinc) with separate 1 nos. 6A Modular type switch & 1 nos. 6/16 A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-17 Item: 1, 3, 4]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/Finolex/RR/Gloster/KEI) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. i) 4 x 16 sq mm + 2X 10 sqmm [PWD/GS Page: E-9 Item: 1 ] [VTPN DB To HTPN DB]

ii) 2 x 10 sq mm + 1X 6 sqmm [ From HTPN DB to SPN DB ]

iii) Do………………Do…………………………………Do………………. 2 x 4 sq mm + 2 x 2.5 sq mm [HTPN DB To phase AC]

iv) Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5 sq mm [For Power Socket]

v) Do…………………..Do…………………Do……………...3 x 1.5 sq mm

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes i) 4 x 16 sq mm + 2X 10 sqmm [PWD/GS Page: F-5 Item: 9 ] [VTPN DB To HTPN DB]

ii) 2 x 10 sq mm + 1X 6 sqmm [ From VTPN DB to SPN DB ]

iii) Do………………………Do…………………Do………………….. 2 x 4 sq mm + 1X 2.5 sqmm [VTPN/HTPN DB To Split AC & Geyser]

iv) Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5 [For Power Socket]

v) Do…………………..Do…………………Do……………...3 x 1.5 sq mm

Supplying and fixing 20 mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [PWD/GS Page: E-16 Item: 7/a ]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand Anchor Roma/Crabtree/Legrand Mylinc), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [For AC/Geyser ] [PWD/GS Page: E-17 Item: 5a]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand North-West/Crabtree/L&T) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [PWD/GS Page: E-19 Item: 17]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand Anchor Roma/Crabtree/Legrand Mylinc) & necy. Connections. [For AC] [PWD/GS Page: E-17 Item: 5b]

Supply & Fixing 240 V 16 A Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc) on existing GI Modular type switch board having top cover plate and making necessary connections as required. [For Geyser ] [PWD/GS Page: E-17 Item: 3/a]

Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W single LED light fitting incl. LED Tube light with aluminium extrusion heat sink , suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make- Philips (TMC 502 1xT-LED 22W, 1200mm 18W 865 T8 I – 2100lm) or equivalent model of Havells/ Wipro/Crompton/Bajaj], With 03 yrs Warranty.

Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W Double LED light fitting incl. 2 nos. LED Tube light with aluminium extrusion heat sink, suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make- Philips (TMC 502 2xT-LED 22W, 1200mm 18W 865 T8 I – 2100lm) Havells/ Wipro/Crompton/Bajaj], With 03 yrs Warranty.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [PWD/GS Page: D-14 Item: 29 ]

Supply & Fixing 240 V, <50 W, 320 RPM, 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire.(Make - Crompton Aura or equivalent model of Orient/Havells), with 02 yrs warranty [Supply of Fan - Non-Schedule Item, Fixing of Fan - PWD/GS Page: C-3 Item: 21/a ]

Supply & Fixing 240 V, 35 W, 920 RPM 225 mm sweep heavy duty AC exhaust fan on 16''x16'' mm thick plywood, after making hole and mending good damages to original finish incl. S & F al. louver shutter as per direction of EIC (Make - EPC or equivalent model of Crompton /Havells/Orient), with 02 yrs warranty [Supply of Fan - Non-Schedule Item, Fixing of Wall Fan - PWD/GS Page: C-4 Item: 28 ], [Incl. for Lift =4 ]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand Anchor/ L&T/Legrand/Crabtree) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [PWD/GS Page: E-18 Item: 10]

Supply of 240 V, 90 W, 1325 RPM, 450 mm sweep Pedestal fan. [Make - Crompton 450mm SSTORM 2 ( METAL BLADE) or equivalent model of Orient/EPC/Havells] [Supply of Fan - Non-Schedule Item ] with 02 yrs warranty

Supply & Fixing 240 V, 70 W, 140 lm/W only outdoor / street light type fitting complete with all accessories to be fixed / projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [Make- Philps (BRP 501 LED098 CW R3C PSU S1 or equivalent model of Havells/Wipro/Crompton/Bajaj] With 05 yrs Warranty [Supply of light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 13 ]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. [PWD/GS Page: H-5 Item: H/5]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required ISI 80 mm dia. (F6/Item-11)

Earthing Installation – with Pipe Electrode : Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [PWD/GS Page: G-1 Item: 1]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By TATA-Medium GI pipe [PWD/GS Page: G-1 Item: 2/a] [ 4 nos. for EI ]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe. [PWD/GS Page: G-2 Item: 3/a]

Earth Busbar Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [PWD/GS Page: G-2 Item: 4/c]

Earth Continuity Strip Connecting the equipments to earth busbar including S & F 20 mm x 3 mm Galvanised (Hot Dip) MS Flat on wall / floor with GI saddles as required and connection to equipments with incl. drilling holes, bolts, nuts, washers etc. [PWD/GS Page: G-3 Item: 5/c]

Supply of 10 Litre water geyser of following specifacation and accessories : Closed water heater ; Class - I, 230 V/ 50 Hz, AC, BEE 5 star rating, porcelain Element with Tubular incology 800 Element copper and outer container should be of Mild Steel and water proof powder coating to product from rust and corrision with the facility of Red-indicator of 'Heating' NEON Light indicator for working of water heater and with polyurethene foam with safety of Thermostat, Thermal cut-out, Multi function valve & sarificial Anode, and must be protected against galvanic corrision using Megnesium sacrificial anode, manufactured in modern, automated plant using European Technology (Make - VENUS Splash/Raycold/AO Smith/Bajaj/Crompton) [Non-Schedule Item ] (Model - Omnis WL or Similar Model)

Supply, Installtion, Testing and Commissioning of 1.95 Tr - 2.2 Tr Split type AC machines having Cooling Capacity range (6.8KW- 7.7.0 KW) with fixed speed rotary compressor, refrigerant gas R32/R410 BEE star rating - 2/3 (EER range 3.5 to 3.99), Air flow range CFM ( 780 - 880), both condenser and cooling coils made of copper tube connecting chord with plug top confirming to IS 1391 ( Part - I & Part - II) with all amendments [ Make - Mitsubishi Heavy Duty (SRK25CSS-S6)/ O-General (ASGA24BUTA-B) ] [NS]

Supply & laying Refrigerant Copper pipe minimum Thicknes1.15 mm. Liquid pipe 9.52 mm (3/8") & Gas pipe 15.88mm (5/8") (Make - Royku/Totaline/Mandeep) and insulation of refrigerant copper pipeping by nitril rubber insulation tube of minimum thickness 9mm.(Make - Aroflex/Acoflex) also raping the insulation & copper wire with GKB Gold raping tape as direction of EIC. [NS]

Supply and drawing 4 core 2.5 sq.mm PVC insulated sheeted wire for connecting the outdoor to indoor communicaion supply. (Make - Havels/Finolex)[NS]

Supply & laying drain water piping work out of UPVC /HDPE hard pipes of 25mm dia 4mm thick (Make- HB/Supreme) incl. fitting accessories bends,elbows,tees, flanges,tapings etc. [NS]

S&F Timer Control Unit for single phase AC Machine assembled with - 12-way SPN DB Box (L&T / Cabtree/Legrand/Siemens/ABB) - 1 no. 32 A DP MCB Isolator (Make: Siemense / Legrand / L&T) - 01 no. Digital 24 hour time switch (GIC/L&T) - 1 no. 32A three pole contactor (L&T) - 01 no. Centre off 2 way toggle switch - 1 no. 32Amp. Barirrer type terminal- 1 no. LED indicating lamp (L&T: SIL R 240V) - 01 No. 2X4sqmm+2.5sqmm copper wire 0.5 Mtr. with complete interconnection with auto-mannual bypass arrangement with locking arrangement incl. making/cutting door of SPN DB box for fixing arrangement of toggle switch, Locking arrangement, LED indicator etc. as required as per direction of EIC. [ For AC - 2, Light - 1]

For Quarter Dismantling the Existing wiring after disconnection of all incomming & outgoing line, existing board, fittings fixture etc.

Supplying and fixing MCB SS enclosure incl 240 V 40 A DP MCB with IP-20/30 protection, powder coated provision for two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. (Legrand/ ABB/ L & T/ Havells etc) [For 2 nos. Quarter] [PWD/GS Page: D-9 Item: 11, Page: D-6 Item: 7]

S&F 2+12 way double-door SPN MCB Distribution Board with IP-42/43 protection, with 240 V 40 A DP MCB isolator as incomer and 12 nos. 6-32A SPMCB as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.as per GS (Make -Legrand/ABB/L&T /Seimens) [PWD/GS Page: D-9 Item: 13, Page: D-5 Item: 6 & 7] [For 3 nos. Quarter]

Supply & Laying of PVC insulated sheathed Al / XLPE power cable of 1.1 KV grade 2 Core x 6 sqmm strandred on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [Make : Nicco / Havells/Gloster/Polycab / RR] [For Security Light] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-1 Item: 2]

Supplying & Laying of one PVC insulated sheathed Al / XLPE armoured power cable of 1.1 KV grade 4 Core x 10 sq.mm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. [Make : Nicco / Gloster/Havells/Polycab / RR] [ From DB to Bus Bar Chamber for security light ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-2 Item: 1]

Supplying & fixing sheet metal (16 SWG)[500x150mm] Iron Clad Cu Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 415 V, 63A Cu Bus Bar (4 x 15x3mm) [PWD/GS Page: D-12 Item: 19/b ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below i) 2 Core x 6 sqmm [For Security Light] [PWD/GS Page: F-4 Item: 7 ]

ii) 4 Core x 10 sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. i) 2 Core x 6 sqmm [For Security Light] [PWD/GS Page: F-5 Item: 8/b ]

ii) 4 Core x 10 sqmm

Supply & Laying of 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/Finolex/RR/Gloster/KEI) in 20mm size PVC rigid pipe on wall ncl. mending good the damages as per direction of EIC. [PWD/GS Page: E-14 Item: 1 ] i) 2x4 sqmm + 1x2.5 sqmm [ AC/Geyser]

ii) 2x6 sqmm + 1x4 sqmm

iii) 2x2.5 sqmm + 1x1.5 sqmm [ for power plug/computer]

iv) 3x1.5 sqmm

Finishing the end of PVC insulated insulated & unsheated copper wire as per direction of EIC. [PWD/GS Page: F-5 Item: 9 ] i) 2x4 sqmm + 1x2.5 sqmm [ AC/Geyser]

ii) 2x6 sqmm + 1x4 sqmm

iii) 2x2.5 sqmm + 1x1.5 sqmm

iv) 3x1.5 sqmm

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/Finolex/RR/Gloster/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 8 mtr [PWD/GS Page: E - 24 Item: 1 ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/Finolex/RR/Gloster/KEI) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish i) On board [PWD/GS Page: E-20 Item: 3 ]

ii) do-do………(Avg Run 7.5 Mtr)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand Anchor Roma/Crabtree/Legrand Mylinc), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [For AC/Geyser] [PWD/GS Page: E-17 Item: 5a]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand North-West/Crabtree/L&T) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [PWD/GS Page: E-19 Item: 17]

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 6/16 A, 3 pin Modular type switch (Brand Anchor Roma/Crabtree/Legrand Mylinc), without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 2 nos. 6 A, 5 pin Modular type plug socket (Brand Anchor Roma/Crabtree/Legrand Mylinc) with separate 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 1 nos. 16 A, 3 pin Modular type plug socket (Brand Anchor Roma/Crabtree/Legrand Mylinc) with 1 nos. 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [PWD/GS Page: E-18 Item: 9/b]

Supplying and Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S & F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [PWD/GS Page: D-14 Item: 31 ]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand Anchor/ L&T/Legrand/Crabtree) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [PWD/GS Page: E-18 Item: 10]

Supply & Fixing 240 V, 10W-12 W, 100 lm/W LED bulk head light fitting and complete with all accessories incl. mending the damages as directed by EIC [Make- Philips/Havells/ Wipro/Crompton/Bajaj], With 03 yrs Warrany [Supply of light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 13 ] [For Room's Toilet/Lift]

Supply & Fixing 240 V, 70 W, 140 lm/W only outdoor / street light type fitting complete with all accessories to be fixed / projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [Make- Philps (BRP 501 LED098 CW R3C PSU S1 or equivalent model of Havells/Wipro/Crompton/Bajaj], With 05 yrs Warrany [Supply of light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 13 ]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. [PWD/GS Page: H-5 Item: H/5]

S&F Timer Control Unit for single phase AC Machine assembled with - 12-way SPN DB Box (L&T / Cabtree/Legrand/Siemens/ABB) - 1 no. 32 A DP MCB Isolator (Make: Siemense / Legrand / L&T) - 01 no. Digital 24 hour time switch (GIC/L&T) - 1 no. 32A three pole contactor (L&T) - 01 no. Centre off 2 way toggle switch - 1 no. 32Amp. Barirrer type terminal- 1 no. LED indicating lamp (L&T: SIL R 240V) - 01 No. 2X4sqmm+2.5sqmm copper wire 0.5 Mtr. with complete interconnection with auto-mannual bypass arrangement with locking arrangement incl. making/cutting door of SPN DB box for fixing arrangement of toggle switch, Locking arrangement, LED indicator etc. as required as per direction of EIC. [ For Light - 3]

Earthing Installation – with Pipe Electrode : Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [PWD/GS Page: G-1 Item: 1]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By TATA-Medium GI pipe [PWD/GS Page: G-1 Item: 2/a]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe. [PWD/GS Page: G-2 Item: 3/a]

Earth Busbar Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [PWD/GS Page: G-2 Item: 4/c]

Earth Continuity Strip Connecting the equipments to earth busbar including S & F 20 mm x 3 mm Galvanised (Hot Dip) MS Flat on wall / floor with GI saddles as required and connection to equipments with incl. drilling holes, bolts, nuts, washers etc. [PWD/GS Page: G-3 Item: 5/c]

N.B: i) Payment will be made after availability of fund from concern Department. ii) Payment will be made as per P.W.D norms.

RIK ENTERPRISE (BID ID -6777886)

B M ELECTRIC (BID ID -6764473)

M/s Joy Durga Electric Repairing Shop (BID ID -6759362)