Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 CrAccepted-AOC NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU | JAMMU AND KASHMIR | 181221 | ₹7.2 Cr | L1 | Accepted-AOC L1 being lowest bidder |
| 2 | L2₹7.3 Cr+₹11.1 L (1.53%)Rejected-Finance 135 CHAKRANA TIWARI CHAKA NAINI PRAYAGRAJ 211008 UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211008 | ₹7.3 Cr+₹11.1 L (1.53%) | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹8.1 Cr+₹90.0 L (12.4%)Rejected-Finance 401 SHASTRI NAGAR JAMMU 180004 | JAMMU | JAMMU | JAMMU AND KASHMIR | 180004 | ₹8.1 Cr+₹90.0 L (12.4%) | L3 | Rejected-Finance Other than lowest bidder |
| 4 | L4₹8.6 Cr+₹1.4 Cr (18.9%)Rejected-Finance | ₹8.6 Cr+₹1.4 Cr (18.9%) | L4 | Rejected-Finance Other than lowest bidder |
| 5 | L5₹8.6 Cr+₹1.4 Cr (19.0%)Rejected-Finance H NO 352 SECTOR 1 CHANNI HIMMAT JAMMU J K 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | ₹8.6 Cr+₹1.4 Cr (19.0%) | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/s Khajuria Construction Co. L1 | Onkar Nath Bhalla And Sons Contractor Pvt. Ltd. L4 | M/S ARUN ANAND L5 | vijay builders L2 | DES RAJ NAGPAL CONTRACTORS PVT.LTD L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Construction of Office And Adm Accn (D/S) complete all as shown on drawings and specified complete. | 1 | Each Block | 3,20,00,000 ₹3,20,00,000 | 2,60,00,000 ₹2,60,00,000 Lowest | 3,57,00,000 ₹3,57,00,000 | 2,90,00,000 ₹2,90,00,000 | 2,66,00,000 ₹2,66,00,000 |
| 2.00 | Construction of covered accommodation for 8 Nos of cars complete all as shown on drawings and specified complete. | 1 | Each Block | 8,50,000 ₹8,50,000 Lowest | 31,25,000 ₹31,25,000 | 12,00,000 ₹12,00,000 | 23,50,000 ₹23,50,000 | 21,10,000 ₹21,10,000 |
| 3.00 | Construction of covered accn for 12 scooter/ motor cycle and 05 cycles complete all as shown on drawings and specified complete. | 1 | Each Block | 3,25,000 ₹3,25,000 Lowest | 13,50,000 ₹13,50,000 | 3,90,000 ₹3,90,000 | 7,00,000 ₹7,00,000 | 8,70,000 ₹8,70,000 |
| 4.00 | Construction of covered accn for 18 scooters/ motor cycles complete all as shown on drawings and specified complete. | 1 | Each Block | 3,25,000 ₹3,25,000 Lowest | 13,50,000 ₹13,50,000 | 6,50,000 ₹6,50,000 | 7,00,000 ₹7,00,000 | 8,70,000 ₹8,70,000 |
| 5.00 | Construction of storage accomodation for Internal electric supply, External electric supply stores and Tradesmen shop (D/S) complete all as shown on drawings and specified complete. | 1 | Each Block | 65,00,000 ₹65,00,000 Lowest | 91,61,054 ₹91,61,054 | 86,10,000 ₹86,10,000 | 80,00,000 ₹80,00,000 | 86,00,000 ₹86,00,000 |
| 6.00 | Construction of storage accomodation for BSO stores (S/S) complete all as shown on drawings and specified complete. | 2 | Each Block | 26,00,000 ₹52,00,000 | 41,10,040 ₹82,20,080 | 33,30,000 ₹66,60,000 | 22,00,000 ₹44,00,000 Lowest | 38,50,000 ₹77,00,000 |
| 7.00 | Construction of storage accomodation for BSO stores and B/R stores (D/S) complete all as shown on drawings and specified complete. | 1 | Each Block | 50,00,000 ₹50,00,000 | 71,41,197 ₹71,41,197 | 63,00,000 ₹63,00,000 | 29,40,000 ₹29,40,000 Lowest | 78,00,000 ₹78,00,000 |
| 8.00 | Construction of storage accomadation for Ext W/S store and Refrigeration stores (S/S) complete all as shown on drawings and specified complete. | 1 | Each Block | 36,00,000 ₹36,00,000 Lowest | 61,42,840 ₹61,42,840 | 50,00,000 ₹50,00,000 | 43,50,000 ₹43,50,000 | 55,00,000 ₹55,00,000 |
| 9.00 | Construction of B&R Stores and Ext W/S stores (S/S) complete all as shown on drawings and specified complete. | 1 | Each Block | 58,00,000 ₹58,00,000 Lowest | 99,94,380 ₹99,94,380 | 78,00,000 ₹78,00,000 | 72,50,000 ₹72,50,000 | 90,00,000 ₹90,00,000 |
| 10.00 | Construction of incinerator complete all as shown on drawings and specified complete. | 1 | Each Block | 60,000 ₹60,000 Lowest | 1,00,000 ₹1,00,000 | 75,000 ₹75,000 | 2,00,000 ₹2,00,000 | 1,70,000 ₹1,70,000 |
Tender Value
₹5.5 Cr
EMD Value
₹6 L
Closing Date
11 Sept 2025, 6:00 pmClosed
HQ CHIEF ENGINEER PATHANKOT ZONE
HQ CHIEF ENGINEER PATHANKOT ZONE
PROVN OF OTM ACCN FOR GE KALUCHAK AT KALUCHAK MILITARY STATION
2025_MES_697340_2
CA NO. CEPZ-17/2024-25
Open Tender
Civil Works
Lump-sum
660 days
GE Kaluchak
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹3,000
GE Kaluchak
₹6 L
Yes
10 Apr 2026
26 Jun 2025
18 Sept 2025
26 Jun 2025
11 Sept 2025
28 Aug 2025
Amount
Construction of Office And Adm Accn (D/S) complete all as shown on drawings and specified complete.
Construction of covered accommodation for 8 Nos of cars complete all as shown on drawings and specified complete.
Construction of covered accn for 12 scooter/ motor cycle and 05 cycles complete all as shown on drawings and specified complete.
Construction of covered accn for 18 scooters/ motor cycles complete all as shown on drawings and specified complete.
Construction of storage accomodation for Internal electric supply, External electric supply stores and Tradesmen shop (D/S) complete all as shown on drawings and specified complete.
Construction of storage accomodation for BSO stores (S/S) complete all as shown on drawings and specified complete.
Construction of storage accomodation for BSO stores and B/R stores (D/S) complete all as shown on drawings and specified complete.
Construction of storage accomadation for Ext W/S store and Refrigeration stores (S/S) complete all as shown on drawings and specified complete.
Construction of B&R Stores and Ext W/S stores (S/S) complete all as shown on drawings and specified complete.
Construction of incinerator complete all as shown on drawings and specified complete.
Lumpsum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-II.
Lumpsum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-III.
Lumpsum price worked out by the contractor for EARTH WORK AND SITE CLEARANCE WORKS as listed in Schedule 'A' Part-IV.
Lumpsum price worked out by the contractor for ROAD, PATH, CULVERT & HARDSTANDING WORKS as listed in Schedule 'A' Part-V.
Lumpsum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VI.
Lumpsum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-VII.
Lumpsum price worked out by the contractor for COMPOUND WALL, FENCING AND STEEL GATE WORKS as listed in Schedule 'A' Part-VIII.
Lumpsum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IX.
Lumpsum price worked out by the contractor for SUMMER APPLIANCE WORKS as listed in Schedule 'A' Part-X.
Lumpsum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-XI.
Lumpsum price worked out by the contractor for DISMANTLING & DEMOLITION WORKS as listed in Schedule 'A' Part-XII.
INTERNAL ELECTRIFICATION Supply and fixing LED luminaire surface mounted 4x1, full diffuser 36 watt, 220 V AC high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing round shape 12 watt 220 volts AC surface mounted slim round downlighter with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing high performance IP66 LED Streetlight 20 watt, housing made of die-cast aluminium, with street optic lens, with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore Gl light grade protecion pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and as directed.
Supply and fixing VTPN Loadline DBs as per IEC 61439-3, with 250 amp copper bus bar, 2 neutral bar, 2 earth bar, fully insulated bus bar, Blanking Plates (without MCCB) Double Door 4 way suitable for 160AMP MCCB incomer, IP 43 protection 415 V AC, 50 Hz AC complete all as specified and directed.
M & L for Point wiring with 4Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 4Sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised flush boxes of suitable size including white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc for one 3/5 pin socket outlet 16 Amp independent complete all as specified and directed.
SUMMER APPLIANCE Supply and fixing Water cooler electric driven single phase 230V 50Hz approximate storage capacity of 80 litres and nominal cooling capacity of 40 litres per hour.
Supply and fixing of Desert Cooler electric driven (single phase 230V 50Hz ) having nominal air flow capacity 5000 CuM per hour (or nearest size) ( Steel body) complete all as specified and directed by Engr-in-Charge
Supply and fixing of refrigerator, electric driven (single phase 230V 50Hz ), capacity upto 195 litres. BEE 5 Star Rated complete all as specified and directed by Engr-in-Charge
Supply and fixing of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and desigend for input variation between 170 V to 250 V with out put voltage stabilized at 230 V with accuracy of +/- 2.5% and of capacity 03 KVA complete all as specified and directed by Engr-in-Charge
Supply and fixing of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and desigend for input variation between 170 V to 250 V with out put voltage stabilized at 230 V with accuracy of +/- 2.5% and of capacity 01 KVA complete all as specified and directed by Engr-in-Charge
ROAD PATH AND CULVERTS Providing & applying 2.5mm thick road marking strips (retro- reflective) of specified shade/colour using hot thermoplastic material by fully/semi automáţiac thermoplastic paint applicator machine fitted with profile shoe heater, driven by experiènced operator on road surface incl cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete as per direction of engr-in-charge and accordance with applicable specification complete all as specified and directed.
Solar rod having 6 LED of colour red/yellow house in plastic body cell battery and light senscor welll protected in side polycarbonated sheet device protected with power coated wire mesh cage system mouted over 80 mm dia steel tube powder coated of length 900 mm having sheet footed for firm grip to ground. System workable for 8 to 10 hours all as per cat part no. GPL13-01 of make green light or equivalanet make as approved by Engr-In-Charge.
Solar cat eye having 3 LED/side of colour red/yellow to a side (6nos) house in tough pressure dia casted aluminium allow of size 125 x 125 x 25 mm with built in steam of suitable length for fixing with approxy LED solar cell battery and light sensor well protected in side under tough under cable for 2 to 3 days (night) after full charge in 8-10 hours make oscar or equivalent make as approved by Engr-in- Charge
Stainless steel round road delineator having reflector type red/yellow colour in plastic body protected in side polycarbonated sheet, protected with powder coated wiremesh cage system mouted as approved by Engr-in-Charge.
Reflective type cat ey having colour red/yellow to a side, casted aluminium allow of size 100X100X20mm with built in steam of suitable length for fixing with protected in side as approved by Engr-in-Charge.
Information board with ACP sheet retroreflective writing one side size 600x900 mm. Made arround of reflective intensive tape dully fixed on angle iron frame 40 x40x4 mm frame with aluminium sheet both side 2mm thick as required with PCC 14:8 for post and PCC 1:2:4 for plateforms size 5'x3' complete all as specfied and directed by Engr-In-Charge
EXTERNAL WATER SUPPLY M&L for cutting of existing GI/CI/DI pipe dia 100 mm to 150 mm in position for insertion of new GI tee for branch connection complete with all fittings. Note :- Rates are deems to be including heiring of T&P required at site.
Construction of valve pit chamber of sizes 0.6 x 0.6 x 0.75 mwith brick massonary, one brick thick wall in cement mortor (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation complete including neccessary exc and earthwork in any type of soil, formwork, 15 mm thick cement & plaster rendering internally all arround over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover incld 40 x 40 x 6mm MS angle frame fixed locking arrangement and painting with one coat of red oxide and two coats of black Bituminous paints ;complete all as specfied and directed by Engr-In-Charge
EXTERNAL ELECTRIFICATION Material & labour for in replacement of pole mounted thermoplastic cable junction box for street light with IP-66 protection, halogen free and weather proof with metric knockouts for cable entry for outdoor installaction of size 225mmx295mmx122mm with front door opening system including terminals for one incoming and two outgoing cables of size upto 35 sqmm 3.5 core, one MCB DP 6/10 Amp 240V AC with mounting clamp of flat iron, nut, bolts and washers complete all as specified and directed Engr-in-Charge.
Supply, installation, testing and commissioning of CPRI approved, factory made, LT panel board cubical, Outdoor type, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts. The panel board shall be made of 3.15mm thick CRCA sheet for load bearing members and 16 SWG (1.6 mm thick) for doors covers and internal partitions and shall be powder coated both side. Base frame of the panel shall be made of ICMC channel of size 50 x50 x 6mm, duly grouted on platform made of brick work in CM (1:2:4), 15mm thick plastering in CM (1:6) having minimum height of 600mm. The panel shall be provided with separate compartments for each switch gears with hinged door including interlocking with switch gears. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with epoxy insulated 600 Amps rated high conductivity aluminium bus bars, supported with DMC / SMC barriers and coluor coded, prewired with copper cable, 1100V Danger notice board on front of the panel & the degree of protection is IP-54. the panel shall be complete with instrumentation such as LED phase indicating lamps and CT's including extended aluminium strip of rating of incomer (600 Amps) and outgoing as per rating of MCCB's including aluminium lugs to connect the cable etc and comprising of the following : (MAIN PANEL) (a) MCCB 250 amps, 4 pole, 415V, 50Hz, AC Supply with breaking capacity 36 KA (Adjustable thermal & magnetic release) - 01 Nos (incoming) (b) MCCB 100 amps, 4 pole, 415V, 50Hz, AC Supply with breaking capacity 16 KA (Adjustable thermal & magnetic release) - 02 Nos (outgoing) & 01 No Spare (c) MCB TPN 40 Amp,415V - 03 Nos & 01 No spare (d) MCB SPN 40 Amp - 02 Nos (e) Multifunctional meter ---01 Nos (f) Indicator lamp RYB :01 Set (g) CT'S 200/5 01 Set (h) Timmer- 01 Nos NOTE : 1) Design / Drawing / BOM of the panel board showing the dimensions incl accessories is to be obtained from panel board manufacturer / supplier & is to be got approved from GE before placing final order to the manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
Supply, installation, testing and commissioning of CPRI approved, factory made, LT panel board cubical, Outdoor type, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts. The panel board shall be made of 3.15mm thick CRCA sheet for load bearing members and 16 SWG (1.6 mm thick) for doors covers and internal partitions and shall be powder coated both side. Base frame of the panel shall be made of ICMC channel of size 50 x50 x 6mm, duly grouted on platform made of brick work in CM (1:2:4), 15mm thick plastering in CM (1:6) having minimum height of 600mm. The panel shall be provided with separate compartments for each switch gears with hinged door including interlocking with switch gears. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with epoxy insulated 400 Amps rated high conductivity aluminium bus bars, supported with DMC / SMC barriers and coluor coded, prewired with copper cable, 1100V Danger notice board on front of the panel & the degree of protection is IP-54. the panel shall be complete with instrumentation such as LED phase indicating lamps and CT's, including extended aluminium strip of rating of Incomer (400Amps), and outgoing as per rating of MCCB’s, including aluminium lugs to connect the cable etc., and comprising of the following:- (FEEDER PANEL-I) (a) MCCB 63 amps, 4 pole, 415V, 50Hz, AC Supply with breaking capacity 16KA (Adjustable thermal & fixed magnetic release) - 01 Nos (Incomer) (b) MCB SPN 40 amps, 4 pole, 415V, 50Hz, AC Supply - 04 Nos (outgoing) & 01 No spare (c) Multifunctional meter ---01 Nos (d) Indicator lamp RYB :01 Set (e) CT'S 100/5 01 Set NOTE : 1) Design / Drawing / BOM of the panel board showing the dimensions incl accessories is to be obtained from panel board manufacturer / supplier & is to be got approved from GE before placing final order to the manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
Supply and fixing copper cable multistrand PVC insulated PVC seathead 1.5 Sqmm 3 core all as directed by Engr-in-charge
SEWAGE DISPOSAL RCC Septic tank Conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users
M&L for Soakage well excavation in any type of soil foundation in PCC 1:3:6, walls of honey combed masonry with top ing ow M25 concrete including intercepting chamber and serum chamber made of brick masonry in CM, RCC cover slab in M-25 inter connecting pipes of RCC compelte filled with brick bats of size 3 M dia X 4.5 M effective depth.
NOTE : Total amount of credit i.e, Rs 10,32,383.00 as per Sch of credit (Sch 'A' Part-XIII) shall be deducted from the total amount of BOQ to arrive at contract sum.
vijay builders (BID ID -3416173)
DES RAJ NAGPAL CONTRACTORS PVT.LTD (BID ID -3416499)
Onkar Nath Bhalla And Sons Contractor Pvt. Ltd. (BID ID -3416010)
M/S ARUN ANAND (BID ID -3416155)
stage.html
html • 0.05 MB
technical_802522.pdf
techsummary_802522.pdf
finance_802522.pdf
BOQ Comparative Chart
xlsx
finsummary_802522.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.69 MB
1SCANSFELDRGS.rar
Additional Documents • 0.66 MB
2SCANSTRDRGS.rar
Additional Documents • 6.91 MB
3SCANTDSTDDRGS.rar
Additional Documents • 27.32 MB
Tender.pdf
Tender Documents • 5.20 MB
4SCANSITEPLANS.rar
Additional Documents • 0.36 MB
5SCANARCHDRGS.rar
Additional Documents • 1.79 MB
6SCANAMDTDRGSGEKALUCHAK.rar
Additional Documents • 2.38 MB
REVISEDSCANDRGS.rar
Additional Documents • 1.35 MB
BOQ_802522.xls
BOQ • 0.32 MB
Tenderdocument.rar
Tender Documents • 0.36 MB
Tenderdocument_2.rar
Tender Documents • 2.38 MB
Tenderdocument_3.rar
Tender Documents • 1.35 MB
Tenderdocument_4.rar
Tender Documents • 1.79 MB
Tenderdocument_5.rar
Tender Documents • 6.91 MB
Tenderdocument_6.rar
Tender Documents • 27.32 MB
Tenderdocument_7.rar
Tender Documents • 0.66 MB
BOQ.xls
BOQ • 0.32 MB
Tenderdocument.pdf
Tender Documents • 5.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .