REPAIR MAINT TO JOINERY PLASTERING FLOORING PLUMBING SANITARY FITTINGS AND OTHER MISC WORK IN SWARG MANDIR OFFRS MD ACCN UNDER GE MIS MHOW

Amount

Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) complete all as specified and directed.

All as per item No 1 above but area exc 1.5 Sqm and not exc. 4.0 Sqm each complete all as specified and directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutter of any description n exc. 1 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening after repair work complete all as specified and directed.

S & F of Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.given SSR 2010 complete all as specified and directed.

S & F of 35mm thick 2nd class HW Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F of 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F of second class hard wood glazed skelten shutter, 35mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shuters complete all as specified and directed.

S & F of second class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F of second class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size (125x60)mm complete all as specified and directed.

S&F of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size (105x60)mm complete all as specified and directed.

M&L for Cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or plain cement concrete (1:2:4) Type B-1 using 20mm graded stone aggregate as required exc half brick n.exc one brick complete as specified.

M&L for Providing, plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete all as specified and directed.

S & F of mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fast wall ties hooks for hanging fans, plain angle etc complete all as specified and directed.

Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws complete all as specified and directed.

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S&F in repairs of aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S & F of aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F in repairs of aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F of aluminum anodised alloy handle 150 mm cast typecomplete all as specified and directed.

S & F in repairs of aluminum anodised alloy handle 150 mm cast type complete all as specified and directed.

S & F of stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F of Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F of Butt hinges, medium weight,cold rolled mild steel, 75mm size complete all as specified and directed.

S&F of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

S&F in repairs of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&Fof 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5sqm in each panes all as specified complete all as specified and directed.

All as per item No. 34 above but for figured glass pin headed type complete all as specified and directed.

S&F of glazing with 4.8 mm thick sheet glass ordinary type incl rubber beadings/gaskets around glass panes complete all as specified and directed.

S&F of stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs of stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

S&F in repairs of mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

M&L for preparation of NEW wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over coat of pink primer complete all as specified and directed.

M&L for preparation of Old painted wooden surface applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed.

S & F in repairs of 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S & F in repairs of aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

M&L in repairs of 12mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

M&L in repairs of 18/19mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

S&F of 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F of Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size complete all as specified and directed.

S&Fin repairs of Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size complete all as specified and directed.

S&F in repairs of Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type thickness of lathe 1.25mm complete all as specified and directed.

S&F of safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F of Ball bearing for rolling shutter complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixing with WPC ( liquid) complete all as specified and directed. Note: WPC (liquid) will be measured and paid separately under respective item.

M&L for rendering 5mm thick on concrete surfaces in cement mortar (1:3) finished on even and smooth without using extra cement as in ceiling, Chajja etc.complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted complete all as specified and directed.

M&L for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M & L for Preparation of newly plastered surfaces of Ceiling,chajja and applying three coats of white washcomplete all as specified and directed.

M&L for preparation of new plastered surface and apply two coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified and directed by Engr-in- charge.

M & L for Preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and apply one coats of oil bound distemper complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6), complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl10mm thick cement mortar in CM (1:4) complete all as specified and as directed.

M & L for for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors over and including 15mm thick screed in CM (1:6) , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed.

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed in CM(1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dado (450X300)mm X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles ( 300mm x 200mm) size 6-7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed.

M&L for heavy duty industrial vitrified coloured tiles of size (30cmx30cmx10mm) thick (with grey cement and pigments) set,, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified and directed.

Dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring mirror polished over and including15mm cement screed base laid in CM (1:6) , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M & L for Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement mortar (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm screed bed in CM (1:6) complete all as specified and directed.

M & L for chequered cement concrete tiles (glossy finish) (40 cm x 40 cm ) x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

M&L stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down steel tubing 15mm bore and connections complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore and connection complete all as specified and directed by Engineer - in - Charge.

S & F of GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S & F of GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 250 & n exc 500 ltr complete all as specified & directed.

Dismantling water tanks and removing to store of capacity exc 500 ltr & n exc 1000 ltr complete all as specified & directed.

S & F of Rotational moulded polyethylene water storage tanks (in double layers) of capacity of 500 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.

S&F of Rotational moulded polyethylene water storage tank ( in double layer) of capacity 1000 ltr (Cylindrical/vertical with closed top) , ISI marked hoisted & fixed in position and should be sintex antibacterial or equivalent complete all as specified and directed.

S & F of 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

S & F in repairs of 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repair of wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S&F in repairs of of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repairs of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for kitchen sink complete all as specified and directed.

S&F of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S & F in repairs of10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete all as specified and directed.

S & F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs of PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repair of CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repair of CP mixer for WHB mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S & F in repairs of Wall mixture cromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S & F in repairs of Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm borecomplete all as specified and directed.

S&F in repairs of health faucet with flexible pipe of one mtr length including stand complete all as specified and as directed.

S&F in repair of fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S & F in repairs of CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S& F in repair of CP toilet paper holder complete all as specified and as directed.

M&L in repairs of PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed.

M&L in repairs of 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair of stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size (410mm x 330mm x 160mm) complete all as specified and directed.

S&F in repairs of stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as spd and directed by Engr-in-Charge.Note : siz of plate rack should not be less than (900x 200x1200)mm and weight of rack shall not be less than 8.50 kg each complete all as specified and directed.

S & F in repair of PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size (350 x 450)mm complete,

S&F in repairs of brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified and directed.

S&F in repairs of shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long complete all as specified and directed.

S&F in repairs of soap dish (ovel) type mild steel chromium plated of size not less than 50mm dia complete all as specified and directed.

S&F in repair of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S & F in repairs of towel ring CP complete all as directed & specified.

S&F in repair of Plastic water closet seat cover, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repair of over head tank cover of 500-1000ltr capacity complete all as specified and directed.

S&F in repairs of 25 mm dia stainless steel curtain rod incl S/S decorative brackets, at ends with arrangements as approved by GE complete all as spd and directed.

Taking down steel tubing 50mm bore and connection complete all as specified and directed by Engineer - in - Charge.

S & F of Galvanised steel tubes 50mm dia medium grade for cattle trap,spout pipe etc including welding, greasing etc complete all as specified and directed.

S&F in repairs of PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling Asbestos corrugated & Semicorrugated etc sheetin in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F of 0.50mm thick (total coated thickness) pre-colour, pre profiles(Mangalore pattern) Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete all as specified and directed. Note:- The pre-painted galvalume zinc GI based profile pattern steel should be TATA Blue scope colour bond XRW or equivalent.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of MS Framed work Fe-410-W(Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified and directed.

S&F of Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed.

M&L for preparation of new steel &iron surfaces of any description, not otherwise, described, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling old brick works complete all as specified and directed.

Demolition of cement concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided forcomplete.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.) complete all as specified and directed.

M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B 0) using 12.5 mm graded stone aggregate mixing with WPC as in levelling course in sunken portions etc complete all as specified and directed.

M&L for plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in filling of sunken portion complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in subbase etc complete all as specified and directed.

S&F in repairs of 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and directed.

S&F in repairs of 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process complete all as specified and directed.

S&F in repairs of stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs of (50 X 15) mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.

S&F in repairs of 100 mm size MS mat / glossy finish handle complete all as specified and directed.

S&F in repairs of mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair of modular type stainless steel basket size( 0.50 m x 0.53 m x 0.10 m) (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specified and directed.

All as per item no 152 as above but basket size (0.50 m x 0.53 m x 0.15 m) complete all as specified and directed.

All as per item no 152 as above but basket size( 0.50 m x 0.53 m x 0.21 m) complete all as specified and directed.

S&F in repairs of Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingcomplete all as specified and directed.

S&F in repairs of aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl powder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each in soft/loose soil n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm complete all as specified and directed.

M&L for PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars & posts (incl caps & bases) complete all as specified and directed.

S&F of MS Hand rails, half round or other stock section hand-rail straight portion,drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing incl cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets incl all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n.exc 10cmm long and diameter of neck 5 to 10mm complete all as specified and directed.

S&F of Mild steel Round bar 10 mm dia and over cut to length band to shape required incl cranking, bending spirally for similar work.conforming to Fe-410-W(Gde.E-250) quality-A or Fe 290(Gde-E-165) complete all as specified and directed.

S&F in repair of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Dismantling fencing wire mesh,any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

Supply Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F in repair of providing 25 mm thick pre-cast cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in louvers and jallies (measured solid), including all mouldings and including pre-cast frame set in cement mortar (1:6) complete all as specified and directed.

S&F of coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

sabir and brothers

Chitragupta Construction

M/S Sunshine Construction

NIDHI CONSTRUCTION