SPL REPAIRS TO BLDG NO DS 09/01 TO 09/08 (08 QTRS) AND PROVN OF 04 WATER COOLERS ALONG WITH STABILIZER, 36 X UTENSIL (PLATE) RACKS IN KITCHEN OF JCO S MD ACCN BLDG NO P 210 TO P 218 AT ABC LINE OF AOC CENTRE UNDER AGE B/R (S) NO-II OF GE (S) SECBAD

Amount

Demolition of cement concrete in roof/chajja inc existing roof treatement (other than ground floor) and removing debris to a distance of n.exc 100 m away from the bldg complete all as specified and as directed.

M & L for 25 mm average thick PCC (1:2:4) Type B0 by using 12.50 mm graded crushed stone aggregate as in roof where required over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.

M&L for removal of old treatment of any description and removing the debris roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M & L for 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% of total weight of cement or as per manufacturesr's over concrete surfaces complete all as specified and as directed. ( Note : WPC measured and paid separately)

M&L for priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced application over apply bitumen base aluminium paint @ 0.20 Kg/Sqm complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed. as directed

M & L for cutting grooves in brick wall/roof slab of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and as directed.

M&L for Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat primer. all as specified and as directed..

M&L for Preparatioin of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed..

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed. .

M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and as directed.

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and as directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M&L for two coats of cement base paint over a coat of primer on new surfaces of wall including preperation complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer and birla wall care putty complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling over primer including preparation of new plastered ceiling surfaces complete all as specified and as directed.

M&L complete removal of existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L for preparation of plastered or unplastered old decorated surfaces and applying two coats of white wash on ceiling surfaces.complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L for removal of existing treatment on walls and applying two coats of birla wall care putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of oil bound distemper of any tint complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm or 450 x 300x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick plaster on wall in cement mortar 1:4 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and as directed.

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and as directed.

All as per item above but area exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified and as directed. complete all as specified and as directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specifed and as directed

M & L for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specifed and as directed

S&F of factory made solid PVC moulded shutter with 28 to 30mm thick(stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC prelam sheet on the front face and 2mm thick plain colour PVC sheet on back face with particle board core complete all as specifed and as directed

S&F for 35mm thick factory made plain framed panelled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified and as directed.

S & F 35mm thick 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass and divided into square with plain, rounded, chamfered, mitred and rebated sash bars.complete all as specified and as directed.

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified and as directed.

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S & F Aluminium handle 150mm fabricated type complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified and as directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F 300 mm long helical door springs including roller plate complete all as specified and as directed.

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed.

S & F, steel windows frame with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.complete all as specified and as directed.

All as per item No 42 but without glazing bars complete all as specified and as directed.

S & F, steel ventilators frame with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down complete all as specified and as directed.

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified and as directed.

All as per item No 45 here-in above, but fixed in repairs complete all as specified and as directed.

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165

Hacking out old broken glass any description & size from wooden/steel window and removal of rubbish from work site as directed.

S & F 3mm th sheet glass ordinary quality and fixed with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified and as directed.

M & L for preparation of new wooden surface and applying two coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and as directed.

M & L for preparation of old wooden surface and applying one coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and as directed.

Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc all as specified.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floors all as specified.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia any radius with access door

S&F PVC (SWR) bends 75mm dia any radius with access door

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and as directed.

Demolition of cement concrete in any description and any position paving exc 15 cm thickness below and above ground level all as specified and directed.

Taking down cement plaster incl existing treatment in sunken portion , washing down with water and applying 15mm tick plaster in CM 1:4 ,ox wotj WPC @ 3% of weight of cement or as per manufacturer's instruction WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:4:8 type D-2 (using 40 mm graded brick aggregate) as in filling of sunken portion etc complete all as specified and as directed. .

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed.

S&F in repairs stop cock 15mm dia cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed.

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.all as specified and as directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed

S&Fin repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP pillar taps

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F 25mm Stainless steel curtain rods incl required nos of brackets complete all as sepcified and as directed

S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long brass cromium plated incl all fitting & fixtures complete all as specified and as directed.

S&F Swivel shower of PTMT any colour for fixing in repairs with 15mm pipe. Min wt 40 gms complete all as sepcified and as directed

S&F stainless steel Kitchen plate rack of overall minimum size 600mm x 600mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws complete all as sepcified and as directed Note : Weight of rack shall not be less than 3.80 Kg.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as sepcified and as directed

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified and as directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as sepcified and as directed

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as sepcified and as directed

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as sepcified and as directed

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C2 (40mm graded crushed aggregate) as in plinth protection finished even and smooth without using extra cement complete all as sepcified and as directed

S&F Prepolished Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete laid dry using machine compaction including 40mm thick sand cushioning complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as sepcified and as directed

S&F 18-20 mm thick Pre-polished mirror finish kota stone as in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece including rounding chamfered edges where complete all as specified and as directed.

All as per item above but 16 to 18mm thck pre-polished mirror finish kota stone slab as in small wiidth in vertical surfaces like landings, risers,, treads, skirtings, dado, etc over and including 10mm thick pcking coat in cement mortar 1:4 complete all as specified and as directed.

S&F stainless steel Kitchen plate rack of overall minimum size 900mm x 600mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg.

Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc complete all as specified and as directed.

M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light/fan point controlled by one switch with PVC insulated multistranded copper conductor cable FRLS of size 1.5 sq mm for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including sunk cast iron box with 3 mm thick bakelite sheet on of any size complete all as specified and as directed

All as per Sl item No 94 above but for One light point controlled by two way switch complete all as specified and as directed.

All as per Sl item No 94 above one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sqmm size complete all as specified and as directed

All as per Item No 94 but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 Sqmm size complete all as specified and as directed

All as per Item No 94 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size complete all as specified and as directed

M&L for point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing/caping with sunk cast iron complete all as specified and as directed

S & F Switch piano single pole flush type 5 amps, 230 volts. complete all as specified and as directed

S & F Switch piano two way flush type 5 Amps capacity 230 volts complete all as specified and as directed

S&F of Bell push, flush type, 5 amp single pole ISI marked complete all as specified and as directed

S&F of switch socket combination 2 in 1, 5 Amps flush type universal complete all as specified and as directed

S&F of socket outlet 3Pin, 5A, flush type complete all as specified and as directed

S&F of switch socket combination 3pin 16A flush type complete all as specified and as directed

S&F of switch 16A flush type complete all as specified and as directed.

S&F of socket 5pin 16A flush type complete all as specified and as directed.

S & F of Electronic type fan regulator stepped socket type, suitable to work on 230 volts complete all as specified and as directed

M&L of Bells Ding dong AC 230Volts Single pole complete all as specified and as directed.

M&L of ceiling rose surface bakelite 65x50 mm two to three terminals.complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed Note :- Taking down old existing Ceiling fan and deposit to MES Store shall be born by the contractor only and no extra cost against it shell be paid.

Supply and fix exhaust fan made of sturdy Engineering metal complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 m omplete connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S & F LED light fitting 1x10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

M&L lamp holder PVC/Polycor bonate type insulated body with back plate suitable for batten /angle fittings complete all as specified and as directed

S&F of LED Bulb 9 Watts complete all as specified and as directed.

S&F of decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 18/20Watts LED 6000K with connection 3 core copper wire from ceiling rose to fitting with complete accessories complete all as specified and as directed

S&F of LED light fitting 35Watts security light including connection of 3core copper wire complete all as specified and as directed

S&F of sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door including taking down old one complete all as specified and as directed.

S&F of MCB DB SPN 8Way double door 240Volt 50Hz including taking down old one,complete all as specified and as directed

S&F of MCB three phase and neutral (TPN), 63 Amps, 415 Volts, connecting with copper lugs, complete all as specified and as directed.

S&F of MCB, single pole, 40 Amps, 240 Volts, connecting with copper lugs complete all as specified and as directed.

S&F of MCB SP 6 to 32 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/Indoasian/ C&S

S&F of MCB SPN 40-63 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S

S&F for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 6 Sqmm along with one run of 6 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing caping incl taking down old one complete incl taking down old one complete all as specified and as directed.

M & L of earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion incl taking down old earthing, all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

S&F, installation , commissioning of water cooer fully stainless steel, electric driven single phase having approx storage and normial cooling capacity as 40/80 ltrs water cooler FSS-80 Ltrs complate all as specified and as directed Make : Voltas Modal No. 6010518/40/80/FSS or Techno Equivalent in Usha /Blue Star

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with ouput votage stabilzer at 230 V with accuracy of +- 2.5 % and of capacity 1 KVA

M&L for point wireing in concealed conduit complete all as specifed with 1100 volts grade 1.5 sqmm PVC insulated FRLS , multistranded copper condutor woth ISI marking (for phase, Neutral and earth) in and oncluding Non metallic PVC rigid conduit medium graded with ISI mark of size 20 mm dia with all accessaries concealed in wall /ceiling/roof etc, for fixing modular switches, soclets fan regulators etc of suitable modules an earth with wire to be connected to common earth dolly and making good surface all as specified and as directed for one 3 Pin 5 Amps switch socket independent board Note : Modualr cover plate with frame, flush box and modular switches will be inclusive of rate quoted

S&F for socket outlet modular type multipurpose 2/3 pin, 6 Amps 230 volts combined 2 module,

S&F single pole modular switch 1 way 6 Amps , 1 module

S&F an laying of CPVC pipe of outyer dia 16 mm SDR 11 & p-lain CPVC SDR 11 fittings on walls/ceiling or laying in floors including fixing to the existing pipe of size upto 15mm with suitable fittings complete all as specified and directed.

S&F ball valve for CPVC pipe withouter dia 16mm complete all as specified and as directed

ATUL ENTERPRISES (BID ID -3149376)

PARDEEP AND CO (BID ID -3152962)

RAGHAVENDRA CONSTRUCTIONS (BID ID -3151328)

M/S P.SWAROOP KUMAR (BID ID -3153829)

K LAKSHMAN SINGH AND CO (BID ID -3151266)

harshraj and co (BID ID -3152664)

BEEGEE DESIGN SYSTEMS (BID ID -3153612)

M/S RADHIKA ENTERPRISES (BID ID -3152702)