Reconstruction of Ram Mandir at Narsing Bankat Near Girdhar Sagar, Nathdwara.

Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stone 9"x9"x6' height carving pillar and 02 nos of Bansi Paharpur 9"x4.5"x6' half craving pillars.Base stone for pillars of size 15'6"x11"x4" and floweral design at raised tibari floor square and rectangular pillar above rounded carving stone pillar and dab stone at top of arches including 03 Nos Bansi Paharpur stone arches approx. size (4'3"x2'6"x4"thk) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening) as per attached drawing no. NTB/VV/01

Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stone 4.5"x4.5"x6' height carving half pillar and 02 nos of Bansi Paharpur 4.5"x4.5"x6' half craving pillars.Base stone for pillars of size 15'6"x11"x4" and floweral design at raised tibari floor square and rectangular pillar above rounded carving stone pillar and dab stone at top of arches including Bansi Paharpur stone arches approx. size (4'3"x2'6"x2"thk) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening) as per direction of EIC.

Providing and fixing Bansi Paharpur stone chajja 50 mm thick and upto 80 cm projection supported with Bansi Paharpur Stone Toddies of size (200x200x100mm thick) having distance 600mm c/c and 2 extra toddies at every corner if required.Bansi Paharpur Stone "Chajjali" 250mm wide and 40mm thick through out chajja lenght with necessary clamping and fittings including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,calmping fastners and fittings etc. as and where requirerd.(payment shall be made for the total length of chajja) as per attached drawing no.NTB/VV/05

Providing and fixing Bansi Paharpur stone "Jarokha" over existing windows having the bottom Bansi Paharpur stone sill with carving as approved by Engineer-In-Charge of approx. size 6'6"x2'3"x4"thick the base of the stone sill supported with Bansi Paharpur stone todies 08 Nos for bottom shelves of size 18"x18"x4" thk .The chajja of Jarokha supported with 4Nos Bansi Paharpur Stone full pillars size 4"x4"x6' and 2Nos Bansi Paharpur Stone half pillar of size 4"x2"x6' with 3Nos Bansi Paharpur Stone Mehrab approx size (450x600x50mm thk) front facing and 2Nos Bansi paharpur stone Mehrab of size (300x600x50mm thk) with both side carving . The top of the window is supported by Bansi Paharpur stone chajja 50mm thick and upto 450mm projection. The chajja is supported by 8Nos Bansi Paharpur stone toddies of size(175mmx175mmx100mm thk).Stone jali 50mm thick and 350mm height is fixed between the pillars and top and bottom is decorated by ansored patti 100mm wide.complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding clamping and fastners etc. as and where required.The joints are filled with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade.(payment shall be made for the total Number of Jhrokha) as per attached drawing no. NTB/VV/02

Providing and fixing Bansi paharpur sand stone jali 50mm thick and 600mm height as per ornamental design to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade as approved by Engineer-In-Charge as per attached drawing no. NTB/VV/06

Providing and fixing Bansi paharpur sand stone post (Mataga) having size 100x100mm height 900mm as per ornamental design such as like flower octonogal head border etc. to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade.as approved by Engineer-In-Charge as per attached drawing no. NTB/VV/06

Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stone half Carving pillar of size (300x150x2300mm) .Base stone for opening of approx size (2900x400x150mm thk) with floweral design at raised floor square and rectangular pillar above rounded carving stone pillar and dab stone at jambs and lintel 400mm wide and 50mm thick throughout opening. The Dab stone fixed with adhesive and admixture.Bansi Paharpur stone arches of approx size (2850x1550x150mm thick) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening) as per attached drawing no. NTB/VV/03

Providing and fixing complete Bansi Paharpur stone elevation including 2 nos of Bansi Paharpur stone half Carving pillar of size (150x75x1650mm) .Base stone for opening of size 2000x250x150mm thk with floweral design at raised floor square and rectangular pillar above rounded carving stone pillar and dab stone at jambs and lintel 250mm wide and 40mm thick throughout opening. The Dab stone fixed with adhesive and admixture.Bansi Paharpur stone arches of approx size (2000x1000x75mm thick) with both side carving as including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication of Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd.(payment shall be made for the total area of opening) as per approved design and drawing by Engineer-In-Charge. as per attached drawing no. NTB/VV/04

Providing and Fixing of Bansi Paharpur sand stone Mehrab in existing opening at site having carving as per existing mehrab at site.50 mm thick Both Side carving as per approved by Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where requirerd. (payment shall be made for the total area from bottom line of meharab to apex line)

P/F of 50mm thick Bansi paharpur sand stone sill and jambs in the existing opening complete. The stone sill and Jambs fixed with adhesive and admixture as approved by Engineer-In-Charge including all scaffolding and necessary clamping and fiittings.