Erection of LT and HT metallic electrical poles with Overhead Lines and other required OHL structures at different locations along with dismantling of LT and HT poles, OHL and other OHL structures damaged during thundering, tree felling, heavy rains

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of pole/street light standard/ strut embedded in cement concrete foundation etc as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate40 mmnominal size) foundation including excavation and refilling etc. as required. Above 11.00 metre and upto 13.00 metre

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8metres long stay rod, anchor plate of size 45cm X 45 cm X7.5mm, thimble , stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete1:3:6(1cement : 3 coarsesand:6graded stone aggregate 40mm nominal size ) foundation including excavation and refilling etc. as required.

Supply of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc inclduing drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Erection of angle iron/ channel iron cross arm on wood/RCC/PCC/ steel tubular/rail pole etc as required.

Supplying and erection of 75 mm X 90 mm shackle insulator with G.I. Bolt, nuts and straps etc as required.

Supplying and erection of 100 mm X 65 mm pin insulator complete with G.I. Soindle and nuts etc as required.

Erection of LV/MV shackle/pin insulator etc as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 mm diameter including binding etc as required.