CONSTRUCTION OF MOTOR CYCLE STAND AND FURNISHING OF AEE OFFICE,RAIRANGPUR

Excavation of foundation in Hard soil within 50m initial lead and 1.5m initial lift including rough dressing and levelling the bed

Filling foundation with sand well watered and rammed including cost, conveyance and royality of sand etc. complete as per direction of Engg-in-Charge.

Cement concrete 1:4:8 using 4cm. size CBG Crusher broken metal including cost, conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

Brick work with Fly Ash Bricks having crushing strength 75 kg/sq.cm in c.m. 1:6 in F & P including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

R.C.C. work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring shuttering and finishing the exposed surface smooth providing groves or beds wherever necessary including cost, conveyance, royalties and excluding GST and cost of all materials and labour with T & P required for the work etc. complete in all respect excluding the cost of M.S. Rods or Tor steel and binding wires and labour charge for bending binding and tying grills as directed by the Engineer – in charge in Ground Floor.

(a) Column base

(b) Plinth band

(c) Column

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance and excluding GST of all materials with labour, cess and T&P etc. required for the work complete.

Brick work with Fly Ash .Bricks having crushing strength between 100kg/sq.cm to 149kg/sq.cm in c.m. 1:6 in Sup.Str. including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect.

Fixing industrial Chequred tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for

Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete

Painting two coats with weather seal coat paint over a coat of primer with water bound cement paint including cost, conveyance, excluding GST of all materials, labour and T&P etc. complete.

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete as per direction of Engg-in-Charge .

Wall painting two coats on new work with Distemper of approved shade etc. complete as per direction of Engg-in-Charge .

Earth filling by mechanical means borrowed from out side within 5km initial lead and 1.5m initial lift including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge .

Providing fitting and fixing at all height false ceilling of 12 mm thick tapered edge gypsum board including providing and fixing of frame work made of from M.S sheet and galvanised in accordance with zinc coating 600 and consisting of angle cleats of sixe including fixing the Gypsum Board with ceilling sectiona dperimerter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30mm long.the perimeter of ceilling fixid to wall/partition with the help of rawl plugs at 450 mm center to center with 25 mm long drive all screws 2230 mm inerval including jointing and fixing to a flush ficish of tapered and square edge of the gupsum board with recommended filler,paper tapes,ficisher and two coats of primer suitable for gypsum board,including the cost of painting.(No deduction have to made for light opening.)Complete in all respect as per direction in charge.

Providing fitting fixing of decorative Gypsum cornice in all respect as per direction in charge.

Supplying, fitting, fixing up window (sliding type) made up of aluminium section 9778 as window frame section; No 4095. 4096, and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement and all fittings including cost of materials, taxes labour, T&P complete

Providing & fixing vertical roller blinds made up wih 0.60 mm thick woven fabrics coated synthetic matt of approved colour fitted properly at specified space with suitable standard power alluminium top channel etc complete.

Supply fitting and fixing of 0.40mm GCI. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting as per direction of Engineer-incharge.

Supplying, fitting and fixing of square MS bar of size 50mm X 50mm and hollow round pipe of size 75 mm including cost of fitting, fixing , conveyance and all taxes etc complete.

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead

electrical

S/F of 18 SWG following size of modular GI box along with accessories in recess wiring including cutting the wall and making board thesame in case of recess conduit as required(1.24)

do.......12 Module