Increasing Capacity of T/F

Amount

Work No. 01 (Siswa) Shifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Siswa, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)

11 KV ‘XLPE’ power cable.

33 KV ‘VCB’ complete with all structure.

33 KV C.T.Structure

33 KV Fuse Set

33 KV Fuse Set Structure

33 Bus Isolator

33 KV Post Insulator

Structure for Above

33 KV Double T/F Control pannel

33 KV lightening arrester

33 KV LA Structure.

33 Bus Isolator Structure.

33 KV P.T.Structure

11 KV Incoming, Switch Gear ‘VCB’ CTR-600/ 300/5A, 350MVA

11 KV Outgoing, Switch Gear ‘VCB’ CTR-200/ 100/5A, 350MVA

Bus coupler 350MVA

Earthing of S/s Outdoor equipments (earthmat)

Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.

Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)

Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type

Providing & Making Connection of 24 Volt Battery with inverter and cabinet

Providing P.G. clamp for Dog conductor.

Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)

G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.

providing , erection and Grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.

Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.

Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.

Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.

Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.

Testing of 11 KV switchgear panel in all respect.

Providing & Laying of control cable in trench from switchyard to control room 33 KV Control panel and making connection complete.

Size 2 x 2.5 mm2

Size 4 x 2.5 mm2

Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate

Separate earthing of Sub-station Indoor Equipment complete including cost of All materials.

Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.

Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.

Erection, grouting and mounting of PT structure. fitting of “PT” on erected structure with complete earthing.

Erection grouting and earthing of following structure.

33 KV Bus Isolator structure

33 KV fuse set structure

33 KV Post insulator structure

33 KV L.A. structure

Mounting and fitting of equipment on erected structures.

33 KV Bus – Isolator 400 Amp.

33 KV Post Insulator

33 KV fuse set ( Copper strip as required size for 33 KV fuse set)

Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.

Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)

Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.

Dismantling of existing pale fencing and resetting after completion of transformer work.

Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)

Providing Rubber Mat 2m x1mx12mm thick Black/Red Colour

Work No. 02 (Brijmanganj) Shifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Brijamanganj, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)

11 KV ‘XLPE’ power cable.

33 KV ‘VCB’ complete with all structure.

33 KV C.T.Structure

33 KV Fuse Set

33 KV Fuse Set Structure

33 Bus Isolator

33 KV Post Insulator

Structure for 33 KV Post Insulator

33 KV Double T/F Control pannel

33 KV lightening arrester

33 KV LA Structure.

33 Bus Isolator Structure.

33 KV P.T.Structure

11 KV Incoming, Switch Gear ‘VCB’ CTR-600/ 300/5A, 350MVA

11 KV Outgoing, Switch Gear ‘VCB’ CTR-200/ 100/5A, 350MVA

Bus coupler 350MVA

Earthing of S/s Outdoor equipments (earthmat)

Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.

Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)

Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type

Providing & Making Connection of 24 Volt Battery with inverter and cabinet

Providing P.G. clamp for Dog conductor.

Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)

G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.

providing , erection and Grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.

Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.

Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.

Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.

Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.

Testing of 11 KV switchgear panel in all respect.

Providing & Laying of control cable in Trench from switchyard to control room 33 KV Control panel and making connection complete.

Size 2 x 2.5 mm2

Size 4 x 2.5 mm2

Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate

Separate earthing of Sub-station Indoor Equipment complete including cost of All materials.

Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.

Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.

Erection, grouting and mounting of PT structure. fitting of “PT” on erected structure with complete earthing.

Erection grouting and earthing of following structure.

33 KV Bus Isolator structure

33 KV fuse set structure

33 KV Post insulator structure

33 KV L.A. structure

Mounting and fitting of equipment on erected structures.

33 KV Post Insulator

33 KV Bus – Isolator 400 Amp.

33 KV fuse set ( Copper strip as required size for 33 KV fuse set)

Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.

Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)

Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.

Dismantling of existing pale fencing and resetting after completion of transformer work.

Providing Rubber Mat 2m x1mx12mm thick Black/Red Colour

Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)

Work No. 03 (Bhitauli) PART - A- MATERIAL PROVIDED BY CONTRACTOR

11 KV C/J Kit 3X185 mm² XLPE Outdoor

Number Plate with clamp

Danger Board with Clamp (40x6mm)

GI Barbed wire

Bolts, Nuts, & Washers

X-arm clamp with nut bolt for PCC Pole 8.5 mtr with nut bolt by 50x6 mm MS flat Iron make

X-arm clamp with nut bolt for ST Pole 11 mtr. with nut bolt by 50x6 mm MS flat Iron make

Stay set with Clamp for PCC Pole 8.5 mtr with Nut and Bolt by 50x6 mm MS Flat Iron make.

Stay Rod 20x1800 mm

Stay wire 7/8 SWG

MS Earthing Rod 20x2500 mm²

P.G. Clamp for Weasel Conductor

‘E’ Bracket for 11 KV

T-off Channel holding clamp (50x6mm) with Bolts and Nuts

11 KV Guarding angle Clamp with nut bolt for ST Pole 11mtr. with Nut and Bolt by 50x6 mm MS Flat Iron make.

F-bracke with nut bolt for PCC Pole 8.5 mtr with nut bolt by 50x6 mm MS flat Iron make

F-bracke with nut bolt for ST Pole 11 mtr with nut bolt by 50x6 mm MS flat Iron make

Rubber Mat 2m x1mx12mm thick Black/Red Colour

Hand Gloves (Suitable for 33 KV)

11 KV Top Channel Clamp with nut Bolt.

11 KV Bracing Angle Clamp with nut Bolt.

Alluminium Paint

Red Oxide Paint

Part B Work Shifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Bhitauli, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)

11 KV ‘XLPE’ power cable.

33 KV ‘VCB’ complete with all structure.

33 KV C.T.Structure

33 KV Fuse Set

33 KV Fuse Set Structure

33 Bus Isolator

33 KV Post Insulator

Structure for Above

33 KV Single T/F Control pannel

33 KV lightening arrester

33 KV LA Structure.

33 Bus Isolator Structure.

33 KV P.T.Structure

11 KV Incoming, Switch Gear ‘VCB’ CTR-600/ 300/5A, 350MVA

11 KV Outgoing, Switch Gear ‘VCB’ CTR-200/ 100/5A, 350MVA

Bus coupler 350MVA

P.C.C. Pole 8.5 Mtr. Long

S.T. Pole 11 Mtr. Long

ACSR weasel Conductor

11 KV ‘XLPE’ Cable 3x185mm².

11 KV Polymer Pin Insulator

11 KV Polymer Disc Insulator T&C Type

Disc fitting T&C Type for Weasel

11 KV. Top channel ( 100x50mmX2240 mm)

11 KV ‘V’ Type Cross Arm. (65x65x6mm)

M.S. Angle Iron 65x65x6mm bracing with clamps (50x6mm)

11 KV T-off Channel (125x65x1300mm)

11 KV Guarding Angle (65x65x6mm)

GI Wire 5 mm

Earthing of S/s Outdoor equipments (earthmat)

Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.

Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)

Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type

Providing & Making Connection of 24 Volt Battery with inverter and cabinet

Providing P.G. clamp for Dog conductor.

Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)

G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.

providing , erection and Grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.

Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.

Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.

Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.

Testing of 11 KV switchgear panel in all respect.

Providing & Laying of control cable in trench from switchyard to control room 33 KV Control panel and making connection complete.

Size 2 x 2.5 mm2

Size 4 x 2.5 mm2

Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate

Separate earthing of Sub-station Indoor Equipment complete including cost of All materials.

Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.

Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.

Erection, grouting and mounting of PT structure. fitting of “PT” on erected structure with complete earthing.

Erection grouting and earthing of following structure.

33 KV Bus Isolator structure

33 KV fuse set structure

33 KV Post insulator structure

33 KV L.A. structure

Mounting and fitting of equipment on erected structures.

33 KV fuse set ( Copper strip as required size for 33 KV fuse set)

33 KV Bus – Isolator 400 Amp.

33 KV Post Insulator

Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.

Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)

Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.

Dismantling of existing pale fencing and resetting after completion of transformer work.

Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)

Erection of single pole 8.5 Mtr.Long PCC pole & mounting of all its accessories etc.complete work.

Erection of single pole on 11 Mtr.Long S.T. pole & mounting of all its accessories etc.complete work.

Erection of Double pole 8.5 Mtr.Long PCC pole & mounting of all its accessories etc.complete work.

Stringing of ACSR Weasel conductor inclouding laying & mounting of conductor,sagging & binding properly.

Making of Sectional T-off Pole with all fitting complete work.

Extra work for separation of Circuit i.e. Shiffiting the Existing Line from Vertical to Horizontal (By opening the winding from insulator and re-sagging the conductor from Vertical to Horizontal

Cutting of tree branches/bamoos in the path of 11 KV line to get adequate clearance from conductor.

Painting of S.T.Pole with red oxide and alluminium paint(Two coat)

Groutings of stays complete in ratio 1:4:8 (cement:sand:brickballast).

Earthing of support complete.

Guarding of Road /11 KV /L.T.Line crossing.

m/s tripathi brothers