Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-Finance | L1 | Accepted-Finance Lowest | |
| 2 | L2₹27.5 L+₹87,826.50 (3.30%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹27.5 L+₹92,399 (3.47%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹27.7 L+₹1.1 L (4.14%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M.D. CONSTRUCTION CO. L4 | National Rewinding Works L3 | BHUSHAN BHIMRAO PATIL L1 | M/s Malinath Electricals L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | S&F steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer erected in position but gear operated type with bevel gear box and crank handle and Safety lever locks mild steel with 4 levers for rolling shutters including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed by Engr-in-charge. | 8 | Sqm | 4,000 ₹32,000 | 3,000 ₹24,000 | 2,500 ₹20,000 Lowest | 2,600 ₹20,800 |
| 2.00 | S&F steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer erected in position push pull or manual type and Safety lever locks mild steel with 4 levers for rolling shutters including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed by Engr-in-charge. | 8 | Sqm | 3,000 ₹24,000 | 2,560 ₹20,480 | 2,200 ₹17,600 Lowest | 2,500 ₹20,000 |
| 3.00 | Taking down carefully hood and steel rolling shutter of size not exceeding 20 sqm and replacement of unserviceable/defective parts including whereever required welding work and refixing/erecting in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut bolts,brackets,handle etc, removing of bend, alignment etc to make the system smooth functional & making good the disturbed surface all as specified & directed by Engineer-in-Charge.
Note :- (i) The unserviceable parts to be replaced shall be measured and paid for separately as "Supply only".
(ii) Quoted rate shall be inclusive of providing missing nuts bolts, greasing, oiling, denting, tension to spring,erection and necessary welding work etc. | 10 | Each Job | 1,000 ₹10,000 Lowest | 2,000 ₹20,000 | 1,100 ₹11,000 | 2,993 ₹29,930 |
| 4.00 | Supply only spring suitable for rolling shutter of area not exceeding 20 sqm each complete all as specified and directed by Engr-in-charge.. | 6 | Each | 1,200 ₹7,200 | 700 ₹4,200 Lowest | 850 ₹5,100 | 1,400 ₹8,400 |
| 5.00 | Supply only bearing suitable for shaft of rolling shutter area n.exc. 20 Sqm each complete all as specified and directed by Engr-in-charge. | 6 | Each | 1,000 ₹6,000 | 700 ₹4,200 | 420 ₹2,520 Lowest | 500 ₹3,000 |
| 6.00 | Supply only MS connecting anchoring rod/shaft suitable for rolling shutter area n.exc. 20 Sqm each with necessary holes for shaft complete all as specified and directed by Engr-in-charge. | 4 | RM | 500 ₹2,000 | 450 ₹1,800 | 360 ₹1,440 Lowest | 400 ₹1,600 |
| 7.00 | Supply only MS 1.25mm thick guide rail suitable for rolling shutter area n.exc. 20 Sqm each with necessary holes for shaft complete all as specified and directed by Engr-in-charge. | 6 | RM | 600 ₹3,600 | 400 ₹2,400 | 320 ₹1,920 Lowest | 800 ₹4,800 |
| 8.00 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engr-in-charge. | 4 | Each | 1,000 ₹4,000 | 2,000 ₹8,000 | 750 ₹3,000 | 500 ₹2,000 Lowest |
| 9.00 | M & L for fixed in repair Mild steel, plain, black sheet of 1.25 mm thick in steel gates/hood cover to rolling shutter and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed by Engr-in-charge. | 60 | Sqm | 800 ₹48,000 | 400 ₹24,000 Lowest | 550 ₹33,000 | 700 ₹42,000 |
| 10.00 | Dismantling structural steel work including doors, gates excl framed truss etc. complete all as specified and directed by Engr-in-charge. | 37.5 | Qtl | 300 ₹11,250 | 100 ₹3,750 | 400 ₹15,000 | 99 ₹3,712.5 Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
25 Aug 2026, 6:00 pmClosed
GE (AF) UTARLAI
GE (AF) UTARLAI PB No. 11 Barmer 344001 (Raj)
REPAIR TO BOUNDARY WALL, JAFFARI WALL, DRAIN AND OTHER MISC B/R WORKS WALL FENCING GATE, PLASTERING, PAINTING IN DOMESTIC AREA AT AF STN UTARLAI
2026_MES_779324_1
8141/E8
Open Tender
Civil Works
Item Rate
180 days
Utarlai
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) UTARLAI
₹60,000
Yes
24 Sept 2026
27 Jul 2026
27 Aug 2026
27 Jul 2026
25 Aug 2026
11 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer erected in position but gear operated type with bevel gear box and crank handle and Safety lever locks mild steel with 4 levers for rolling shutters including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed by Engr-in-charge. | 8 | Sqm | 10 | ₹80 |
| 2 | S&F steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer erected in position push pull or manual type and Safety lever locks mild steel with 4 levers for rolling shutters including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed by Engr-in-charge. | 8 | Sqm | 10 | ₹80 |
| 3 | Taking down carefully hood and steel rolling shutter of size not exceeding 20 sqm and replacement of unserviceable/defective parts including whereever required welding work and refixing/erecting in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut bolts,brackets,handle etc, removing of bend, alignment etc to make the system smooth functional & making good the disturbed surface all as specified & directed by Engineer-in-Charge.
Note :- (i) The unserviceable parts to be replaced shall be measured and paid for separately as "Supply only".
(ii) Quoted rate shall be inclusive of providing missing nuts bolts, greasing, oiling, denting, tension to spring,erection and necessary welding work etc. | 10 | Each Job | 10 | ₹100 |
| 4 | Supply only spring suitable for rolling shutter of area not exceeding 20 sqm each complete all as specified and directed by Engr-in-charge.. | 6 | Each | 10 | ₹60 |
| 5 | Supply only bearing suitable for shaft of rolling shutter area n.exc. 20 Sqm each complete all as specified and directed by Engr-in-charge. | 6 | Each | 10 | ₹60 |
| 6 | Supply only MS connecting anchoring rod/shaft suitable for rolling shutter area n.exc. 20 Sqm each with necessary holes for shaft complete all as specified and directed by Engr-in-charge. | 4 | RM | 10 | ₹40 |
| 7 | Supply only MS 1.25mm thick guide rail suitable for rolling shutter area n.exc. 20 Sqm each with necessary holes for shaft complete all as specified and directed by Engr-in-charge. | 6 | RM | 10 | ₹60 |
| 8 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engr-in-charge. | 4 | Each | 10 | ₹40 |
| 9 | M & L for fixed in repair Mild steel, plain, black sheet of 1.25 mm thick in steel gates/hood cover to rolling shutter and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed by Engr-in-charge. | 60 | Sqm | 10 | ₹600 |
| 10 | Dismantling structural steel work including doors, gates excl framed truss etc. complete all as specified and directed by Engr-in-charge. | 37.5 | Qtl | 10 | ₹375 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
TD.pdf
Tender Documents • 0.66 MB
BOQ_872899.xls
BOQ • 1.88 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .