PROVN OF TRG STORAGE SHED AT CTW MCEME ADDN/ALTN TO WASH ROOM NEAR APT BAY OF FDE MCEME AND PROVN OF FRESH RATION DISTRIBUTION SHED NEAR QM STORES AT MACEME UNDER GE MCEME SECUNDERABAD

Amount

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F in repair PVC (SWR) 100/110mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps complete all as specified and directed.

M&L for rendering 15 mm thick on brick/concrete surfaces of walls in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in two layers (5mm thick in CM 1:4 with using water proofing compound over 10 mm thick in CM 1:6 )on external surfaces fair faces of brick work or concrete even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of Oil Bound Distemper over and including a coat of primer over and including 2 to 3 mm thick wall care putty finish including preparing the new plastered wall surfaces complete all as specified and directed.

M&L for two coats of cement base paint over a coat of primer including preparation of newly plastered surface on walls complete all as specified and directed.

M&L for complete removal of existing treatment from surfaces and applying two coats of oil bound distemper over a coat of alkali resisitant primer and one coat ( 2mm thick) wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment using washing and rubbing down etc of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coat of cement base paint complete all as specified and directed. ( Ht of Bldg up to four stories )

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed complete all as specified and directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and directed.

S&F 100 mm long Stainless Steel butt hinges medium weight cold rolled and mild steel hinge pin complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium anodised handle 125 mm fabricated type polished and fixed complete all as specified and directed.

M&L for 200 mm Aluminium anodised barrel tower bolts of extruded section rolled complete all as specified and directed.

M&L for coloured Joint free Anti-skid Rectified Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc. complete all as specified and directed.

M&L for Glazed ceramic tiles 450X 300X 7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

S&F in viterous china wash down closet pan (pedestal pattern) including connection to drain and flushing pipe etc and plastic seat cover complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and directed.

S&F wash hand basin in repair Vitreous china white flat back size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets in repairs complete all as specified and directed.

S&F in repairs 25mm dia for high density polythelyne pipes (UPVC) of pressure rating 06 kgf/cm2 fixed complete to concealed wall or in floors etc. complete all as specified and directed.

S&F in repairs 20mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed complete to concealed wall or in floors etc. complete all as specified and directed.

S&F 15mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore Bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 750mm complete all as specified and directed.

S&F 15mm dia brass Stop valves screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white all as specified including flushing pipe and waste pipe in repairs complete all as specified and directed.

S&F in CP 15mm, stop valves/ angle cock (Push type), cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe for urinalscomplete all as specified and directed.

S&F for chromium plated urinal spindle spreader 15mm fix to urinal complete all as specified and directed by engineer in charge.

S&F hand shower (Health faucet) (ABS Body) with 15mm dia, 1.2m long flexible tube & wall hook complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs, PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I 1000 Ltrs capacity including all fittings complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F towel rod in repair with hanging hooks etc of stainless steel 60 cm long complete all as specified and directed.

M&L brick work with fly ash bricks built in CM 1:4 with modular bricks 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

Excavation in trenches not exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundations, manholes, laying of sewage lines etc., n.exc. 10Sqm on plan and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

M & L RCC drain pipes of 150mm bore, class NP2, with collars laid and jointed, laid in tenches and jointed in CM 1:1 complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) concrete bed to drain pipes of 150 mm dia, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man holes cover slabs etc including necessary form work and set in CM 1:6, complete all as specified and as directed. Note:- Reinforcement will be measured and paid seperately complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto, as per item no. 43 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Returning, filling in with approved soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200/225mm dia pipe complete all as specified and as directed.

Excavation in Post holes ( or similar holes ) in hard dense soil, each not exc 0.5 cum, getting out, and removing excavated soil to a distance n.exc 50m. complete all as specified and directed.

M&L Treating surfaces of ends of post etc area n.exc 0.1 sq.m each tretad with tar or coal tar black paint complete all as specified and directed.

M&L Providing cement concrete 1:2:4 in foundations, including raft footings, foundation beams and mass concrete.Type B-1,(using 20 mm graded aggregate), all as directed by Engr-in-charge.

M&L For Two coat of Synthetic enamel paint over a coat Zinc chrome primer, including Preparing new steel surfaces any description, over 10 cm width or grith,not otherwise described complete all as specified and directed.

S&F Steel work in tubular trusses / rectangular or square, Hollow mild steel sections for structural use, including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S.1161-1979 grade St-240, and Painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or or fixed with 'L' or 'J' type or cranked hooks bolts in liew of screw complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, ridge fixed with self tapping screws complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L Hardcore guage exc 63 mm n.exc. 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface.Brocken stone or Boulders complete all as specified and directed.

M&L for cement concrete Type D-2 1:4:8 (40 mm graded stone aggregate ),75mm thick as in sub base complete all as specified and as directed

M&L cement concrete type B1, 1:2:4 (20mm graded Aggregate) 40 mm thick in floor complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate in foundation/mass concrete for footing and steps complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6 Mtr mean raius built in CM 1:6 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 ( using 20 mm graded aggregate) in , copings, haunching and benching the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plaster surface of wall and applying two coat of white wash over a coat of primer complete all as specified and directed

M&L for treating the top surfaces of filled earth at the rate of 5 litre of emulsion per sqare metre of surface area complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litre of emulsion per sqare metre of surface area complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per sqare metre of perimeter wall complete all as specified and directed.

M&L for formwork to fair finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for RCC Type B1 1:11/2:3 ( 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for formwork to fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for RCC Type B1 1:11/2:3 ( 20mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to fair finished surfaces of timber form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc. complete all as specified and directed.

M&L for RCC Type B1 1:11/2:3 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for form work to chajjas, and similar work including edges for fair finished surfaces complete all as specified and directed.

M&L for RCC Type B1 1:11/2:3 ( 20mm graded aggregate) in Chajjas complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling, complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L applying two coats of white wash, over a coat of primer on new ceiling surface including preparation of surface, complete all as specified and as directed by Engineer-in-Charge.

M&L for Moorum/approved earth filling in floors or pavings laid in layers n.exc 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor / plinth protection including finished even and smooth without using extra cement complete all as specified and directed.

M&L Fibre insulation boards 12mm thick ordinary type fixed to timber frame in ceilings work complete all as specified and directed.

M&L for Aluminium snap grid frame work for false ceiling size 605x605mm complete all as specified and directed.

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L Pressed steel 105x60mm frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

M&L 35 mm thick 2nd class Hardwood Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 150 mm long complete all as specified and directed.

S&F Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminum alloy and fixed of 300mm long.complete all as specified and directed.

S&F Butt hinges, 100 mm long extruded aluminium alloy with galvanisedmild steel hinge pin, anodised and fixed, type c-21 complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised,150mm long complete all as specified and directed.

S&F steel windows/ventilator with slide/top hung shutters inculding box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engineer-in-Charge.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated steel surfaces over 10cm in width or girth, not otherwise described in any pattern complete all as specified and directed.

M&L for sand cushion/bed for laying interlocking tiles / paver blocks complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with gery cement and no pigment, etc complete all as specified and directed.

Removing excavated soil .exc250m but n exc 500m and depositing where directed by Engr-in -charge complete all as specified and directed.

Material and labour for concealed type point wiring in wall and surface type on roof ceiling with single core PVC insulated unsheathed 1100 volt grade cable with multistranded FRLS copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring in wall including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded FRLS copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified and as directed for One light point controlled by one, one way switch 5 amps, SP

All as per item No. 99 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed.

All as per item No. 99 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No. 99 above but for One 3 point 5 Amps switch socket outlet point controlled by other switch on the same board complete all as specified and directed.

All as per item No. 99 above but using 4.0 Sqmm single core FRLS copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.00 Sqmm FRLS copper conductor PVC wire as earth continuity conductor on independant board complete all as specified and directed.

Material and labour for surface type point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded FRLS copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring in wall including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded FRLS copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified and as directed for One light point controlled by one, one way switch 5 amps, SP

Supply and fixing of Switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as specified and directed.

Supply and fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified and directed.

Supply and fixing of socket outlet 2 in 1 multipurpose 2/3 pin 5 amps flush type control by other switch complete all as specified and directed.

Supply and fixing switch socket combination 2 in 1 multipurpose 3pin 5/15 amps flush type complete all as specified and directed.

Supply and fixing of electronic ceiling fan regulator stepped 2M type heavy duty suitable to work on 230 volts complete all as specified and directed.

Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

Supply and fixing MCB DB double door TPN 4 way with 200 Amps busbar including making good the distrubed surface to match with the existing surface complete all as specified and directed.

Supply and fixing MCB DB double door SPN 4 way with 200 Amps busbar including making good the distrubed surface to match with the existing surface complete all as specified and directed.

Supply and fix in repair MCB TPN, 63 Amps, 415 volts suitable for fixing on MCB DB complete all as specified and directed

Supply and fix in repair MCB SPN, upto 40 Amps, 240 volts suitable for fixing on MCB DB complete all as specified and directed

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB complete all as specified and directed.

Supply and fix on walls with proper clamping ISI Marked XLPE insulated armoured heavy duty electric cable with Aluminium conductors 1100 volts of size 6.00Sqmm 3.0 Core complete all as specified and directed.

Supply and fix Medium Grde GI tubing 20mm dia for XLPE cable protection complete all as specified and directed.

Supply and fix Mild Steel plain sheet 600x600x3mm used for fixing of electric board and DBs including Flat Iron angles of size 25x25x3mm 2 nos as directed including bending and welding frame work including PCC work for coping of Iron angle

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old light fitting all as specified and directed .

Suppling and laying ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 25 Sqmm , 3.5 core complete all as specified and directed.

Supply, spread river sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid complete all as specified and directed.

Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm complete all as specified and directed.

Supply and fixing medium grade GI tubing of 50 mm dia for XLPE cable protection complete all as specified and as directed

Supply and fix LED energy efficient security light fitting of capacity of 40 W including suitable dia GI pipe bracket for fixing the light on wall complete all as specified and directed.

S& F Exhaust fan metal body, 225/230 mm sweep, single phase, 50 Hz, with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of exhaust fan and including material and labour for making of hole to the wall of suitable size for fixing of exhaust fan and making good the disturbed surface complete all as specified and directed. Make: Havells or Bajaj or Crompton

S&F 1200mm sweep, energy efficient ceiling fan with blades including making a clamp and down road of suitable size for fixing ceiling fan and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of ceiling fan complete all as specified and directed. Make: Havells or Bajaj or Crompton

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with 8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement including testing all as specified and directed by Engr-In-Charge. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.) complete all as specified and directed by Engineer in Charge.

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

NEWS CONSTRUCTIONS

VACON INFRASTRUCTURES

M/S Sekhar Infra Projects