Karnataka

AOC

Works

Buildings

Repairs to GHS Narendra in Dharwad Taluka

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Karnataka

Amount: ₹12.4 LCloses: 1 Sept 2026Closed

Timeline

Published19 Aug 2026
Closed1 Sept 2026
Awarded—

Bids

1 Bid1 Sept 2026

#	Company	Amount	Status
1	SAGAR KODAGANUR ₹8.7 Laccepted-aoc	₹8.7 L	accepted-aoc

Tender Value

₹12.4 L

EMD Value

₹31,100

Closing Date

1 Sept 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

SHRISHAIL MALLIKARJUN HONAKERI

Office Number

Work Description

Repairs to GHS Narendra in Dharwad Taluka

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28729

Reference Number

RDPR/2026-27/BD/WORK_INDENT28729

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period ie 2021-22 to 2025-26 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only Rs.12,43,420.28 with usually not less than the estimated cost under this contract with UDIN Number.

RequiredIn last five years That is 2021-22 to 2025-26 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs.6.22 Lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.3.74 Lakhs i.e., 30 percent of amount put to tender. Credit lines, letter of credit, certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional in given format.

RequiredThe contractor should scan the GST Certificate

RequiredThe contractor should scan the PAN card& Contact Details

RequiredCalculation sheet of Bidder Capacity AxNX2.5-B

RequiredTenderer should upload address and contact number.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Contractor should upload KPWD renewal registration copy.

Conditional Tenders will not be accepted.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division,Dharwad, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Assessed available tender capacity - (AxNx2.5 - B) Where A is Maximum value of civil engineering works executed in any one year during the last five years That is 2021-22 to 2025-26 year taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited. B is Value, at price level, of existing commitments and on-going works to be completed during the next years.

Contractor should obey with the above conditions in addition to the KW-1.

To qualify for award of this contract each tenderer in his name should have in the last five years period ie 2021-22 to 2025-26 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only Rs.12,43,420.38 with usually not less than the estimated cost under this contract with UDIN Number.

In last five years (i.e., 2021-22 to 2025-26) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs.6.22 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Liquid assets and /or availability of credit facilities of not less than Rs.3.74 Lakhs(30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

Department of Mines and Geosciences Dated: 25-03-2013 Contractor Should get the Mineral Dispatch permit letter and submit it at the time of bill payment. In case of Non-submission of Mineral Dispatch permit action will be taken to impose a penalty of 5 times the Royalty.

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC at the time of aggrement (NSC should be fledge in the name of Executive Engineer)

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extention of time.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹31,100

Important Dates

Last Activity

1 Sept 2026

Published

19 Aug 2026

Download Ends

31 Aug 2026

BOQ Preview

•

Repairs to GHS Narendra in Dharwad Taluka

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevan...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

•

Removal of old broken glass panes ( any thickness of size, quality or description ) from wooden frames, glazed with putty or fixed with beads including cost of labour, complete as per specifications.[...

•

Reeded glass 3mm thick.[I.No.-717/ Page-A-34 of PWD SR 2023-24]

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

G.I. pipes 40 mm dia [Page No.-A-23 / I.No.-362 (VOL-2) of PWD SR 2023-24]

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and fixing using inverte...

•

Extra for groove cutting in brick wall/cc floor to the suitable depth for concealing of conduct/GI pipe and plastering finishing uo to wall surface complete uo to 50mm conduct cc floor.[I.No.-1.7.2 / ...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulat...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. (P No-9, I No.3.7 of Elec SR 2023-24)

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete.12"x12"x3" (300 x...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying 4mm thick Plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F screws [I.No.-3.8 / Page- 9 of Elec SR 2023-24] ( 4 ...

•

Supplying and fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70. efficacy 80 lumen per watt, life 25000 burning hours and Compliance...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

28729.doc

Tender Document • 0.18 MB

Narendra Highschool.pdf

Others - Detail estimate • 3.11 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SAGAR KODAGANUR

₹8.7 Laccepted-aoc