Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹12.6 L+₹4,830 (0.38%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹13.4 L+₹76,032 (6.04%)Rejected-Finance 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹29,100
Closing Date
21 Mar 2024, 6:00 pmClosed
SHRI ANKUR LOHIYA, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_626650_3
GE(S)/PAT/T-53/SN/2023-24
Open Tender
Civil Works
Item Rate
180 days
MIL STN SANGRUR
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (SOUTH) PATIALA
₹29,100
Yes
30 Mar 2024
28 Feb 2024
23 Mar 2024
28 Feb 2024
21 Mar 2024
7 Mar 2024
28 Feb 2024 - 6 Mar 2024
Amount
TABLE DINNING FOR 6 PERS (FD-273/ FD-279) M & L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after removing the old unsv parts complete all as specified
Top using 18mm thick prelaminated particle board (Make Archid/Novapan/ECCO) ISI marked and providing 6mm thick Teak beading all around.
Leg using Teak wood (MP Teak).
Long rails using Teak wood (MP Teak).
Short rails using Teak wood (MP Teak).
Stiffeners using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
MIRROR WITH SHELF (FD-52M)
S&F shelf using 18mm thick prelaminated particle board Make (Archid/Novapan/ECO) ISI marked exterior grade and 6mm thick Teak edging all around.
Supply and fix mirror of 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/Modiguard) with frame of Teak wood, back ply and hanging arrangement.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
PEG TABLE (FD-384) M & L for carrying out repair/replacement of following parts of Peg Table as per drawing after removing the old prts complete all as specified
Top using 18mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak edging all around.
Legs using Teak wood(MP Teak).
Long rails using Teak wood(MP Teak)
Short rails using Teak wood(MP Teak)
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE BED SIDE (FD/E6/MAP/15 'R') M & L for carrying out repair/replacement of following parts of Table bed side as per drawing after removing the old unservicable parts complete all as specified
Top using 18mm thick prelaminated particle board to table bed side make (Archid/Novapan/ECCO) ISI marked and 6mm thick edging shall be provide all around the top all as shown on drg .
Both Side using 18 mm thick prelaminated particle board make (Archid/Action Tesa/ECCO ) ISI marked and 6mm thick Teak edging all around.
Side of drawers using 12 mm thick comercial plywood Make (Kitply/Archid/Green ply) ISI marked.
Bottom of drawers using 6mm thick commercial plywood make (Kitply/Archid/Green ply)
Back of table using 6 mm thick plywood commercial Make (Kitply/Archid/Green ply).
S & F aluminum handle to drawers.
S & F Hard rubber/PVC shoes to each legs.
S & F steel channel to each drawer for Movement of pull out tray all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE BED SIDE ( FD-276) M & L for carrying out repair/replacement of following parts of Table bed side as per drawing after removing the old unservicable parts complete all as specified and shown on drg.
Legs using Teak wood(MP Teak).
Side using 12 mm thick teak wood plank with one side 1.5mm thick laminated sheet.
Back using 6 mm thick commercial plywood ISI marked.
Bottom and shelves using 12 mm thick teak wood plank
Top using 12 mm thick teak wood plank with one side 1.5mm thick laminated sheet.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE CENTRE/TABLE CENTRE TWO TIER (FD-274) M & L for carrying out repair/replacement of following parts to table as per drawing after removing the old unservicable parts complete all as specified and shown on drg.
Top using 18mm thick prelaminated particle board exterior grade, Make Archid/ Action Tesa/ECO or equivalent mentioned hereinafter) ISI marked and 4mm thick teak wood beading all around.
Legs using Teak wood (MP Teak).
Long rails using Teak wood (MP Teak).
Short rails using Teak wood (MP Teak).
Stiffners using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
CHAIR WRITING FD (FD-280 & FD-1107) M & L for carrying out repair/replacement of following parts to chair writing, as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Legs using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Arms using Teak wood (MP Teak).
Stiffners using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
CHAIR DINNING (FD-279 & FD/MAP-II/5) M & L for carrying out repair/replacementof following parts to chair dining, as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Legs using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Stiffners using Teak wood (MP Teak).
Supply and Fixing of PVC seat shall be woven with 2 mm wide cane plastic in Godrej pattern to chair dining (FD/MAP-II/05) Make-Classic/AMKO or equivalent mentioned hereinafter
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
CHAIR EASY (FD-229 & 1108) M & L for carrying out repair/replacement of following parts to chair easy as per drawing after removing the old unservicable parts complete all as specified and shown on drgs
Legs using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Arms using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
M&L for removing old broken cane and recanning with plastic cane (oval shape) 4 mm wide and border with 3mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER or equivalent mentioned hereinafter brand cane to the following furniture articals:-
Chair writing (Drg No FD-280 & FD-1107)
Chair dinning (Drg No FD-279)
Stool dressing CB (Drg No FD-282)
Chair Easy (Drg No FD-229 & FD-1108)
SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (FD-373 / FD-1113) M & L for carrying out repair/replacement of following parts to sofa set, as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Long rails of seat for three seater sofa of size 1590mmx100mmx35mm of using Teak wood (MP Teak).
Side rail of size 575mm x 100mm x 35mm of using Teak wood (MP Teak)
Long rails of seat for three seater sofa of size 1590mmx70mmx35mm of using Teak wood (MP Teak)
Long rails of single seater of size 575mmx70mmx35mm of using Teak wood (MP Teak).
Arms using Teak wood (MP Teak).
Leg using Teak wood (MP Teak).
Sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM or equivalent mentioned hereinafter
Applying two coats of French polish (ready made) after necessary preparation of surfaces to sofa three seater
Applying two coats of French polish (ready made) after necessary preparation of surfaces to sofa single seater
TABLE WRITING (FD-275 & FD-240) M & L for carrying out repair/replacement of following parts of Table writing as per drawing after removing the old unsv parts complete all as specified and shown on drg.
Top of table using of 18mm thick prelaminated particle board Make (Archid/Novapan/ECCO or equivalent mentioned hereinafter) ISI marked, including 6mm thick Teak beading all around.
Legs using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Front of drawer and shutter of cabinet using 18mm thick prelaminated particle board (one side teak finish).
Shutter of cabinet using of 18mm prelaminated particle board(one side teak finish and other side white balancing laminated).
Sides, bottom and shelf of cabinet using 12mm thick particle board.
Bottom of drawer and side of cabinet using 6 mm thick commercial plywood make Kit/green/national or equivalent mentioned hereinafter.
Supply and fixing knobs to drawers.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE OFFICE OFFICER (DW) M & L for carrying out repair/replacement of following parts of Table office officer as per drawing after removing the old unsv parts complete all as specified and shown on drg.
Top of table using of 18mm thick prelaminated particle board Make (Archid/Action Tesa/ECCO or equivalent mentioned hereinafter) ISI marked, including 6mm thick Teak beading all around.
Side, back and bottom of Cabinet using 25mm thick second class hard wood planks.
Side, front and back of drawer using second class hard wood planks.
Bottom of drawer using 6mm thick commercial plywood.
Shutter of cabinet using 25 mm thick hard wood planks with s/s hinges
Stiffners using teak wood
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE OFFICE CLK (DW) M & L for carrying out repair/replacement of following parts of Table office clk as per drawing after removing the old unsv parts complete all as specified and shown on drg.
Top of table using of 18mm thick prelaminated particle board Make (Archid/Action Tesa/ECCO or equivalent mentioned hereinafter) ISI marked, including 6mm thick Teak beading all around.
Side, front and back of drawer using second class hard wood planks.
Bottom of drawer using 6mm thick commercial plywood.
Leg using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Stiffners using teak wood
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE DRESSING GENTS WITH MIRROR (FD-230) M & L for carrying out repair/replacement of following parts of Table Dressing Gents as per drawing after removing the old unsv parts complete all as specified and shown on drgs.
Top of table using of 12mm thick wood plank with laminated sheet 1.5mm thick for one side.
Bottom and back of table using of 12mm thick wood plank .
Both side of table and front of drawer using 12mm thick teak wood plank with laminated sheet 1.5mm thick for one side , bottom of drawer using 6mm thick commercial plywood, side of drawer using 12mm thick teak wood plank.
Supply and fixing Chromium plated knobs for drawers.
Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard or equivalent mentioned hereinafter) with frame of Teak wood and back ply all as shown on Drg.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
SIDE BOARD (FD-241) M & L for carrying out repair/replacement following parts to side board as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board exterior grade, Make : Archidlam/ Novapan/ ECO or equivalent mentioned hereinafter, ISI marked including 4mm thick teak wood beading all around.
Legs using teak wood (MP Teak).
Bottom and shelvs of side board using 18mm thick prelaminated particle board exterior grade, Make : Archidlam/ Novapan/ ECO, or equivalent mentioned hereinafter ISI marked including 4mm thick teak wood beading all around.
Back using of 6mm thick commercial ply wood make-Kitply/Duro/Green.
Side using 18mm thick prelaminated particle board Make : Archidlam/ Novapan/ ECCO, or equivalent mentioned hereinafter ISI marked.
Front of drawers using 18mm thick prelaminated particle board, side and back of drawer using 12mm thick commercial plywood and bottom of drawer using 6mm thick commercial plywood.
Shutter of Cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges.
Supply and fixing knobs for drawers and door shutter.
TABLE DRESSING LADIES WITH MIRROR (FD-251) M & L for carrying out repair/replacement following parts to table dressing ladies, as per drawing after removing the old unsv parts complete all as specified and shown on drgs.
Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard or equivalent mentioned hereinafter) with frame of Teak wood and back ply all as shown on Drg.
Top of table using of 18/19mm thick particle board decorated with phenol formal dehide with laminated sheet 1.5mm thick for one side, Make (Archid/Action Tesa/ECCO or equivalent mentioned hereinafter) including 6 mm thick teak wood beading all around.
Bottom portion and side using 18mm thick Teak veneered face on one side and another side commercial particle board decorated with phenol formal dehide Make (Archid/ Action Tesa/ECCO or equivalent mentioned hereinafter) including 4mm thick teakwood beading.
Side of table and front of drawer using 12mm thick teak wood plank with laminated 1.5 mm thick in one side.
Side and back of drawer using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood.
Supply and fixing knobs for drawers.
Leg using Teak wood (MP Teak).
supply and fixing plane sliding glass 5mm thick and aluminum channel having two 'U' shaped.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE 3' x 2' WITHOUT DRAWER (FD-284) M & L for carrying out repair/replacement of following parts of Table 3' x 2' as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board Make (Archid/Action Tesa/Ecco or equivalent mentioned hereinafter) ISI marked exterior grade including 6mm thick Teak beading all around .
Leg using Teak wood (MP Teak).
Long side rails using Teak wood (MP Teak).
Short side rails using Teak wood (MP Teak).
Stiffeners using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE 3' x 2' WITH DRAWER ( FD-283) M & L for carrying out repair/replacement of following parts of Table 3' x 2' as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board Make (Archid/Action Tesa/Ecco or equivalent mentioned hereinafter) ISI marked exterior grade including 6mm thick Teak beading all around .
Leg using Teak wood (MP Teak).
Long side rails using Teak wood (MP Teak).
Short side rails using Teak wood (MP Teak).
Stiffeners using Teak wood (MP Teak).
Side, back and front of drawers using 12mm thick teak wood plank and bottom of drawer using 6mm thick commersial plywood and shall be repair/replacement of guide rail of drawers whereever required.
Supplying and fixing Knobs for drawer .
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE 3' x 3' WITHOUT DRAWER (FD-291) M & L for carrying out repair/replacement of following parts of Table 3' x 3' as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board Make (Archid/Action Tesa/Ecco or equivalent mentioned hereinafter) ISI marked exterior grade including 6mm thick Teak beading all around .
Leg using Teak wood (MP Teak).
Long side rails using Teak wood (MP Teak).
Short side rails using Teak wood (MP Teak).
Stiffeners using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE 2' x 2' SUNMICA TOP (FD-96 & FD-293) M & L for carrying out repair/replacement of following parts of Table 2' x 2' as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board Make (Archid/action Tesa/Ecco or equivalent mentioned hereinafter) ISI marked exterior grade including 6mm thick Teak beading all around .
Leg using Teak wood (MP Teak).
Long side rails using Teak wood (MP Teak).
Short side rails using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
TABLE DINNING FOR 8 PERSONS (FD-273)
Top 1800x900mm made out of 18mm thick prelaminated particle board exterior grade, Make - Archid/Action tesa/ Ecco or equivalent mentioned hereinafter) ISI marked and including 4mm thick teak wood beading all around.
Legs using Teak wood (MP Teak).
Long rails using Teak wood (MP Teak).
Short rails using Teak wood (MP Teak).
Stiffners using Teak wood (MP Teak).
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
BOOK CASE SMALL (FD-237) M & L for carrying out repair/replacement of following parts of Book case as per drawing after removing the old unservicable parts complete all as specified and shown on drg.
Top using 18mm thick prelaminated particle board exterior grade, Make : Archid/ Action Tesa/ECO or equivalent mentioned hereinafter ISI marked and 4mm thick teak wood beading all around.
Leg using Teak wood (MP Teak).
Back using 6mm thick commercial ply wood.
Side and shelvs using 18mm thick prelaminated particle board exterior grade, Make : Archidlam/ Action tesa/ECO or equivalent mentioned hereinafter ISI marked and 4mm thick teak wood beading all around.
Shutter of cabinet using 18mm thick particle board fixed with continious piano type hinges.
Knob using chromium plated.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
CHAIR DINNING WITH CUSHION (FD/E6/MAP/10'R') M & L for carrying out repair/replacement of following parts of Chair Dinning as per drawing after removing the old unservicable parts complete all as specified and shown on drg.
Legs using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Stiffners using Teak wood (MP Teak).
Seat using 12mm thick BWR phenol bonded plywood over with 75mm thick 40 density foam cover with quality fabric cloth (cost of cloth not less than Rs. 150/- per meter) as approved by GE
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
SAFE MEAT AND MILK (FD-369) M & L for carrying out repair/replacement of following parts of Safe meat and milk as per drawing after removing the old unservicable parts complete all as specified and shown on drg.
Legs using Teak wood (MP Teak).
Rails using Teak wood (MP Teak).
Shelvs using teak wood scantling
Bottom using teak wood planks
Top using teak wood frame and covered with wiremess to inner side , complete shown on drg.
Supply and fix 25mm thick kota stone complete all as per drg.
Supply and fix wiremess to four sides
Applying two coat of synthetic enamel paint white (make-Berger/Asian/Narolac or equivalent mentioned hereinafter) to complete article after necessary preparation of surfaces.
BIN SOLID MULTIPURPOSE (FD/E6/MAP/09) M & L for carrying out repair/replacement following parts to bin solid as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board Make : Archidlam/ Action Tesa/ ECO or equivalent mentioned hereinafter, ISI marked and 4mm thick teak wood beading all around.
Legs using teak wood (MP Teak).
Back using 18mm thick prelaminated particle board.
Side, shelves and drawer using 18mm thick prelaminated particle board Make : Archidlam/ Action Tesa/ ECO, or equivalent mentioned hereinafter ISI marked.
Stiffners using teak wood(MP Teak).
Shutters of cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges.
Supply and fix CP MS handle
ALMIRAH M/U WOODEN (FD-93(M)) M & L for carrying out repair/replacement following parts to Almirah M/U as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Top using 18mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco or equivalent mentioned hereinafter
Shutters of cabinet using 18mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco, or equivalent mentioned hereinafter fitted with continous piano type hinges and 6mm thick Teak wood edging all around.
Leg using Teak wood (MP Teak).
Back of almirah using 12mm thick commercial plywood make (Kitply/Duro/Green or equivalent mentioned hereinafter) all as per drg.
Sides using 18mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco or equivalent mentioned hereinafter
Selved using 18mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco or equivalent mentioned hereinafter
S & F in replacement of Hasp and Staple using Stainless Steel 150 mm long.
S & F in replacement of Chromium plated handle 100 mm long.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.
ALMIRAH MEDIUM/ SMALL STEEL (FD - 1034/ 1032)
Repair to the almirahs such as removing dents from shutters,back, top, bottom and sides of almirah, repair and fixing of existing legs by welding, repair and refixing of existing shelves and making it servicable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement 3 way lock, 4 levers with duplicate Key MAKE : HARRISON/ GODREJ or equivalent mentioned hereinafter and other standard makes as approved by GE all as directed and specified.
Supply and fix in replacement CP MS handles as pre existing pattern and design to any type of almirah complete all as directed and specified.
Repair/replacement of legs by welding to almirah med steel shall be made out of 1 mm thick plane black sheet all as directed and specified.
One coat sprey painting to almirah medium steel inner and outer surface with synthatic enamel paint olive green Make ; Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed.
ALMIRAH LARGE STEEL (FD-1033/ 1031, FD/E6/MAP/18)
Repair to the almirahs such as shutters,back top, bottom and sides of almirah, repair and fixing of existing legs by gas welding,repair and refixing of existing shelves and making it servicable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement 3 way lock, 4 levers with duplicate Key MAKE : HARRISON/ GODREJ and other standard makes as approved by GE all as directed and specified.
Supply and fix in replacement CP MS handles as pre existing pattern and design to any type of almirah complete all as directed and specified.
One coat spray painting to almirah large steel inner and outer surface with synthatic enamel paint OG/ as per specified colour in drg, Make ; Berger/Asian/Narolac or equivalent mentioned hereinafter including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed.
LOCKER STEEL (FD-1029)
Repair to the lockers such as removing dents from shutters, back, top, bottom and sides, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement of chromium plated handle as per existing pattern.
Supply and fix in replacement chromium plated Haps and staple as per existing pattern.
Supply and fix in replacement steel rod all as directed and specified
Repair/replacement of legs by welding to locker steel shall be made out of 1 mm thick plane black sheet all as directed and specified.
One coat spray painting to locker steel inner and outer surface with synthetic enamel paint OG, Make .Berger/Asian/Narolac or equivalent mentioned hereinafter including preparation of surface after cleaning dirt/dust with emery paper complete all as per drg.
CHAIR VERANDAH (FD-256, FD/MAP-II/06)
Welding broken joints of 20mm dia 16 gauge thick conduit pipe of chair verandah.
Supply & Fix hard rubber toes to legs all as specified and shown on drg.
Preparation of old painted surfaces for painting to chair and apply one coat of white synthetic enamel paint to framed chair verandah complete all as specified.
Supply & fixing by welding of MS flat of size 32mm x 455mm x 5mm thick to lower portion of seat of chair verandah (FD/MAP-II/06)
Supply & fixing of Seat and Back to chair verandah (Drg No FD/MAP-II/06) shall be of 4 mm thick PVC (Weight not less than 1.85 kg) and with 10 Nos groves to seat and back, Make-AMKO/Classic or equivalent mentioned hereinafter, all as specified and shown on drg.
Recanning of chair verandah (Drg No FD-256) with plastic cane (oval shape) 3mm wide and border with 4mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER or equivalent mentioned hereinafter brand cane (removing of old broken cane shall be done at BSO yard).
TEAPOY VERANDAH (FD-383, FD/E6/MAP/17)
Supplying and fixing top of 18 mm thick prelaminated particle board Make (Archid/Novapan/ECO or equivalent mentioned hereinafter Board) ISI marked exterior grade and 6mm thick Teak edging all around.
S & F Hard rubber/PVC shoes to each legs all as specified and shown on drg.
Preparaing of steel surface of teapoy whereever required by welding and applying one coat of synthatic enamel paint of required colour all as specified and directed.
TABLE OFFICE CLK STEEL (FD-1004)
Top using of 18mm thick prelaminated particle board Make (Archid/Novapan/Eco or equivalent mentioned hereinafter) ISI marked exterior grade and 6mm thick Teak edging all around.
S & F Hard rubber/PVC shoes to each legs all as specified and directed.
Repair/replacement of drawer and box of table using 1mm thick plane black sheet and apply pink primer to prepare syrface all as shown on drawing.
S & F 3 way 4 lever lock to table make- HARRISON/ GODREJ or equivalent mentioned hereinafter and other standard makes as approved by GE.
MS Square pipe for frame whereever required by welding and preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame, complete all as specified and shown on drg.
TABLE OFFICE OFFICER STEEL (FD-1003)
Top using of 18mm thick prelaminated particle board Make (Archid/Novapan/Eco or equivalent mentioned hereinafter) ISI marked exterior grade and 6mm thick Teak edging all around.
S & F Hard rubber/PVC shoes to each legs all as specified and directed.
Repair/replacement of drawer and box of table using 1mm thick plane black sheet and apply pink primer to prepare syrface all as shown on drawing.
S & F 3 way 4 lever lock to table make- HARRISON/ GODREJ or equivalent mentioned hereinafter and other standard makes as approved by GE
Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame , complete all as specified and directed.
CHAIR WRITING (FD/E6/MAP/12)
Removing the old unservicable fabric cover and foam from chair and welded the frame wherever required and preperation of entire surface and apply one coat of synthetic enamel paint of black colour all as specified & directed.
Supply and fixing seat and back shall be 12 mm thick hot pressed plywood up hoistered with fabric and moulded polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc laping all around. The colour of fabric shall be approved by engr-in-charge and complete all as specified and shown on drawing.
Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert to chair writing all as shown on drg.
Supply and fixing rubber stoper shall be provided as shown on drg.
CHAIR COMPUTER /REVOLVING WITH ARMS (FD/E6/MAP/01)
Removing the old unservicable polyurethane seats and backrest from chair and welded the frame wherever required and repair/replacement of twin wheel castors of swivel type with bracket and apply one coat of synthetic enamel paint of reqd colour after preparation of surface, complete all as specified and shown on drg.
Supply and fixing seat and backrest shall be 12 mm thick hot pressed plywood up hoistered with polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) covered with fabric cloth, colour shall be approved by engr-in-charge and complete all as specified and shown on drawing.
Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert to chair writing all as shown on drg.
Repair/replacement of hydraulic system of chair all be provided as shown on drg.
BED HARD STEEL (FD/E6/MAP/08)
Head board used of 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (minimum thickned 1.6mm) shall be provided alround in Head boared, all as shown on Drg.
Foot board used of 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (minimum thickned 1.6mm) shall be provided alround in foot board, all as shown on Drg.
Supply hard rubber/PVC shoe to the bottom of each leg.
Top of bed used of 12mm thick commercial ply wood of Make (Kitply/Duro/Green Ply or equivalent mentioned hereinafter) ISI marked and provided 4mm thick teak wood edging the ply and shall be fixed with steel nut and bolts to steel frame, all as shown in Drg.
Supply hexagonal bolt of size 10mm x 50mm
Apply one coat of synthetic enamel paint black (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame of bed hard steel, complete all as specified.
TABLE 900x600x760mm W/O DRAWER (FD-1007)
Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO or equivalent mentioned hereinafter ISI marked and 4mm thick teak wood beading all around.
Supply hard rubber/PVC shoe to the bottom of each leg.
Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolacor equivalent mentioned hereinafter) to steel frame , complete all as specified and shown on drg.
TABLE 900x600x760mm WITH DRAWER (FD-1008)
Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO or equivalent mentioned hereinafter ISI marked and 4mm thick teak wood beading all around.
Supply hard rubber/PVC shoe to the bottom of each leg.
Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame , complete all as specified and shown on drg.
TABLE STEEL 900 X 900 X 760MM (FD-1009)
Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO or equivalent mentioned hereinafter ISI marked and 4mm thick teak wood beading all around.
Supply hard rubber/PVC shoe to the bottom of each leg.
Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame , complete all as specified and shown on drg.
TABLE DINNING OR STEEL (FD-165)
Top using 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO or equivalent mentioned hereinafter ISI marked and 6mm thick teak wood beading all around.
MS Square pipe for frame whereever required by welding and preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame , complete all as specified and shown on drg.
BOOK CASE STEEL (FD-1028)
Repair to the book case such as removing dents from shutters,back, top, bottom and sides; repair and fixing of existing legs by welding, repair and refixing of existing shelves and making it servicable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement 3 way lock, 4 levers with duplicate Key MAKE : HARRISON/ GODREJ or equivalent mentioned hereinafter and other standard makes as approved by GE all as directed and specified.
Supply and fix in replacement CP MS handles complete all as directed and specified.
Supply and fix in replacement unsv glasses of 5mm thick complete all as directed and specified.
Apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac or equivalent mentioned hereinafter) to steel frame , complete all as specified and shown on drg.
M/s Harmans
Arneja Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .