WBPWDTE/AE/BESD-I/e-NIQ 12 of 2023-24

Amount

Supply & fixing of 240V 15 watt outdoor type LED Post-top light fittings with nacessary inter connection(Make-Havells/Crompton/Orient/Wipro)

Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Make-KEI/Havells/Gloster/RR) of the following sizes in 13mm dia 3mm thick Polythene Pipe and making necy. connection as required. a) 3 x 22/0.3 (1.5 sqmm)

Supplying and fixing 40A DP MCB Isolator (Make-L&T) in a MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Supply & fixing 250 V,LED Bulk Head with Pressure die cast aluminium housing bulkhead for multiple application. IP65 protected.(Philips/CG-SUNRISE/LBHE-10-CDL / Bajaj / Wipro/Havells)

Supply & fixing 250 V, Decorative Post top for 360° indirect light with IP 65 protection. Resistant to impact and corrosion. Glare-free and better uniformity. (CG-LPTO-40-CDL-M / Wipro/Havells)

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary Without Loop Box.

Painting of Steel Tubular Pole of 3 mtr length and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint upto 9 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

S&F of 2" dia SST pole of 3 mtr Long size for fixing of Post Top light to illuminate the newly constructed pathway as per direction of E.I.C.

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 200 mm x 250 mm" with Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and fixed the same on pole with necessary clamping arrangement also comprising of 2 terminal loop box( 40 Amp). Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement, as per direction of EIC

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required [F6/11] 32 mm dia

Supply and delivery of following 1.1 KV grade XLPE armoured cables (Polycab/Havells/RR Kabel/ Gloster) 2 core 10sqmm

Laying of cable as below in underground trench 1.0/1.5 Ft average depth, including filling the space between the cable and with shifted soil, leveling up and restoring surface duly rammed.(NS) 2 core 10sqmm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish [F3/5] 2 core 10sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [F4/7] 2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : [F5/8b] 2 core 10 sqmm

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil)

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS No.-4 SWG

GENUINE ENGINEERING WORKS

ASSOCIATE

R.K.ENTERPRISE