REPAIR/REPLACEMENT TO CERTAIN B/R WORK IN JCOS ORS MD ACCN AT CHERRING ENCLAVE AND 5 SIKH LI UNDER AOR OF AGE BR I OF GE NORTH DELHI CANTT 10

Dismantling of floor of size not exceeding 4.00 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, grinding any sharp edges etc all as specified and directed with following:- (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of fosroc or pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with sika ® plastocrete plus as specified. (d) M&L for providing 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (e) M&L for sunken portion filled with 40mm graded brick bats and finished with 50mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of each WC portion is n.exc 4.00 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs ponding test shall be carried out for sunken treatment before payment.

S&L of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, tank adaptor, Union, etc suitable for 15mm bore bath fittings including taking down GI tubing ). Note:-Length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

All as per description the srl item No 8 above but in vertical surface as skirting, dado and risers to steps over and including 10mm thick rendering/backing coat in cement mortar 1:4 etc.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L glazed ceramic coloured tiles in vertical surface area of each tile between 0.06 to 0.15 Sqm each, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & directed. Note: - Tiling work to be done in patches, forming hole where required over making good wall surface.

M&L 20mm to 25mm thick pre-polished machine cut kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed.

M&L granite 12 to18mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 10mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite including moulding of edge of granite complete all as specified and directed

M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height including two coat of Oil Bound Distemper over 1mm thick putty wall care putty complete all as specified and as directed.

M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (Exteernal surfaces) finished even and smooth including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height including application of two coats of cement base paint over a coat of primer, complete all as specified and as directed

M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including Taking down cement or cement lime plaster, on ceiling sufface including raking out joints, hacking for key, scrubbing down with water etc incl application of three coats of white wash complete all as specified and directed

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for existing treatment complete removal from wall and preparing old decorated surfaces of wall and applying two coats of Oil Bound Distemper over a coat of 1mm wall care putty complete all as specified and directed

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

S&F in repair float valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed

Cutting chases in brick walls, pinning in, making good any thickness up to wall tile to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting exceeding 20cm girth complete all as specified and directed

S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed

S&F 32mm dia bore low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete all as specified and directed

PVC waste/flush bend pipe appx 600mm long complete all as specified and directed

S&F in repair PVC connection 600mm long and15mm dia with brass fly nut at both ends complete all as specified and directed

S&F in repair chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

S&F FRP door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufactures. Made with fire retardant agrade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS-14856-2000

S&F in repair Stainless steel, wire cloth 0.56mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with necessary fixing arrangement complete all as specified and directed

S&F pressed steel frames of size/section for doors of section 125mm x 60mm including 06 Nos hold fast of MS flat iron of size 25mm x 5mm with one or more rebates including necessary fixing lugs, 3x hinges of 100mm, lock strike plate, filling hollow of frame and hold fast fixed with plain cement concrete 1:2:4 type B0 (using 12.5mm stone aggregate) and applying two coat of synthetic enamel paint, colour as approved over a coat of redoxide etc, complete all as specified and directed

S&F pressed steel frames of size/section for doors of section 105mm x 60mm with one or more rebates including necessary fixing lugs, 3 x hinges of 100mm , lock strike plate, filling hollow of frame with plain cement concrete 1:2:4 type B0 (using 12.5mm stone aggregate) and applying two coat of oil paint colour as approved over a coat of redoxide etc, complete all as specified and directed

S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet etc complete all as specified and directed

Extra over rates of width 18/19mm of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and directed

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed

S&F stainless steel cromium plated tubing of 20mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified and directed

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed