Repair and Maintance of Mini Power Pump and Power Pumps in Ward No. 36,37,38,39 and 44 in Zone III, Vellore Corporation

Removing the submersible pumpset and its accessories from the bore well 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications.

Rewinding of burnt motor of Submersible type pump set. The work includes the cost of winding wires, sleeves, connection wires and other required winding materials, dismantling, assembling, testing etc., complete (The cost towards the old materials should be deducted) upto 2.5HP

Re-erection of submersible pumpset into the borewell after attending the repairs 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications.

Removing the submersible pumpset and its accessories from the bore well 7.50 Hp to 10.00 HP including all material charges and all labour charges etc., complete as per standard specifications.

Rewinding of burnt motor of Submersible type pump set. The work includes the cost of winding wires, sleeves, connection wires and other required winding materials, dismantling, assembling, testing etc., complete (The cost towards the old materials should be deducted) 7.50 Hp to 10.00 HP

Re-erection of submersible pumpset into the borewell after attending the repairs 7.50 Hp to 10.00 HP including all material charges and all labour charges etc., complete as per standard specifications.

Transportation of pump set to the workshop from the site and back to the site from workshop 2.5 HP to 10.00 HP including all material charges and all labour charges etc., complete as per standard specifications.

Servicing, commissioning and testing of submersible motor 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications.

Servicing, commissioning and testing of submersible Pump 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications.

Servicing commissioning of all accessories in the panel board such as starter, main switch, volt meter, ammeter etc, and rectifying the electrical defects (excluding cost of materials) 1.5 to 10 HP

Removing the Trapped Submersible motor pumpset in the Borewell using Chain Pully including all Material and Labour Charges etc., Complet

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete

Supply and delivery of 2HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 100m Head including all material charges and labour charges etc., complete as per TWAD Specifications.

Erection of 2HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 100m Head including all material charges and labour charges etc., complete as per TWAD Specifications.

Supply and delivery of 7.50 HP submersible motor (50LPM x 100mm head) for ISI make in good quality without Panel board including cost of all material charges etc complete as per IS 8034/1989 standerd specification.

Erection of 7.50 HP submersible motor (50LPM x 100mm head) for ISI make in good quality without Panel board including cost of all material charges etc complete as per IS 8034/1989 standerd specification.

Supply and delivery of 4.00sqmm flat cable including all cost and labour charged etc., complete as per standard specifications

Supply and Delivery of 25mm 'U' PVC pipe with ISI Mark including all cost of all material charges and all labour charges etc., complete as per standard specifications.

Supply and fixing of 2.00 HP single phase Panel Board for ISI make in good quality including cost of all material charges and labour charges etc., complete as per Specifications.

Supply and delivery and fixing of HDPE tank as per IS 12701/ 996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (S.No.17.0 TWAD 19-20)

Supply delivery and fixing of GI & PVC Borewell specials including cost of all material and labour charges etc., complete

Bore cover plate

25 mm GI Flange set

Collar set (Top and Bottom)

25 mm MS Clamp set

1" GI bend

1" GI Tee

1" GI Coupling

1" PVC Ball Valve

Nylon Rope

Supply,Delivery and fixing of 56/0.3 (4sqmm) GI service wire including cost of all material charges and labour charges etc., complete as per Specifications.