Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical No EMD or Fee received |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical No EMD or Fee received |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical No EMD or Fee received |
| 5 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical No EMD or Fee received |
Tender Value
Refer Docs
Closing Date
15 Jul 2021, 6:00 pmClosed
EXECUTIVE ENGINEER PWD CONST DN JAIPUR
EXECUTIVE ENGINEER PWD CONST DN JAIPUR
Addition/ Alteration work in Existing Reception of Rajasthan Sectt. Jaipur (Supply of Furniture)
2021_CEPWD_231011_1
NIT 12/2021-22 EE PWD CONST DN JAIPUR
Open Tender
Miscellaneous Works
90 days
JAIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
EE PWD CONST DN JAIPUR/ MD RISL BY EGRASS
Exempted
19 Jul 2021
5 Jul 2021
16 Jul 2021
5 Jul 2021
15 Jul 2021
5 Jul 2021
Amount
Supply of Airport Sofa with following material specification : Chair Seat : High Quality cold rolled sheet is perforated, pressed and welded to form the shape. The surface is then cleaned with acid to remove rust and electrostatically coated with epoxy powder and then cured under heat to allow it to form a "skin " thickness - 1.2mm. Decorative Seat : High quality metal is bent to form the shape and then the surface is polished to perfection. Arm/ Leg : High quality mild steel tube / sheet is welded to form the shape. The surface is then cleaned with acid to remove rust and powder coated. Thickness -1.2mm
Cross Bar: High quality cold rolled sheet is pressed and welded to form the shape and the surface is then cleaned with acid to remove rust and powder coated. Thickness - 2mm Customized : Seat: Chairs Single seater to Five seaters. Colours : Chairs of Colours : Chrome, Silver, Grey, Blue, Cherry and Black. Arm : Can be customized to give different colour and finished, powder coating / chrome plating. Product Code : There is provision of providing additional arms in between two seats where the product code becomes "AA" as suffic with its regular code e.g. 5002 becomes 5002 AA. Leg : Can be customized to give different colour and finishes, powder coating / chrome plating,
Supply of Executive Medium Back Fix Chair of Godrej, Wipro, Featherlite, Harmony, Durian Elegant, Intex or equivalent good company make having following specifications Seat/back assembly. The Seat/back are made up of 12mm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. Back size 520mm x 580mm (WxH) Seat size 460mm x 470mm (WxD) Overall height 1080mm x 1180mm Polyurethane foam. The polyurethane foam is moulded with density = 45+/-2 Kg/m3. Upholstery : Fabric/ Leatherit, Arm rests ; The one piece of armrest in "D" shape made up of Polypropylene.
Supply of Sofa Settee 3 seater. The frame of the Sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U shape back (made from Hardwood) and the rear legs to be is made out of "2½"x2½" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x1¼". The overall size of the Sofa will have 100mm thick Foam cushions (32 D) in seat (Fixed over flat Zig Zag spring) and 50mm thick foam cushion in back and 50 mm thick foam on arm rests covered with tapestry cloth costing upto Rs- 500/-per meter. The Sofa will be melamine polished in Walnut shade complete in all respect as per design and sample approved by Engineer-in-charge and client department.
Supply of Sofa Settee 2 seater. The frame of the Sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U shape back (made from Hardwood) and the rear legs to be is made out of "2½"x2½" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x1¼". The overall size of the Sofa will have 100mm thick Foam cushions (32 D) in seat (Fixed over flat Zig Zag spring) and 50mm thick foam cushion in back and 50 mm thick foam on arm rests covered with tapestry cloth costing upto Rs- 500/-per meter. The Sofa will be melamine polished in Walnut shade complete in all respect as per design and sample approved by Engineer-in-charge and client department.
Supply of Centre Table 12mm thick clear glass top, overall size 4'x2'xl8". The glass will be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x21/2" with horizontal members made out of size 3"xl" complete in all respect as per design and sample approved by Engineer-in-charge and client department.
Supply of peacock type knockdown wooden office with arm computer chair. The wooden are moulded venier, lumber in natural finish. The seat and back made with banyan foam superior quality upholsted with leatherite finish. The back height 83 cm width 54 cm, depth 56 cm, seat height 45 cm. the seat and back having 1'' thick high density u foam (40 density) complete as per approved sample by engineer in charge.
Supply of Executive Table with Pedestal and Side Unit SIZE : 1500 X 750 X 750mm | L X W X H) SIDE UNIT ; 900 X 450 X 750mm (LXWXH) Table Top: The table top of size 1500 x 750mm should made out of 25mm thick particle board post formed in half round shape on the front and rear side and the rest flat edge duly sealed with PVC edge banded 1.5mm thick of matching color, Legs: The top to be supported by pedestal unit on one side and an 18mm thick four side edge banding leg on the other side. The leg to be FSEB on front and rear side and the rest of the sides should be edge banded with 1.5mm thick PVC Edge Banding.
Side unit: The structure to be made out with 18mm thick particle board with 1.5mm thick PVC edge bending of matching color There should be a 2 skirting provided in the bottom area. The top of the unit to be made of 25mm thick particleboard duly post formed should have half round shape on the front edge and rest of the sides edge banded with 1.5mm thick PVC Edge Banding of matching color. The unit to be duly covered with 2 nos. of shutters & 1 nos. drawers made out with 13mm particleboard with post formed finish and quarter round edges fitted with auto hinges, handles, one lock and all other hardware/accessories as per design.
Supply of Storage Unit(Almirah) sire 900x450x2100 (WxDxH) as per following specification The structure is made out with 18mm thick particle board with 1.5mm thick PVC edge banding of matching colour having total 3 partitions (or storage provided with 2 Nos. of fixed shelves there is a 2" skirting provided in the bottom area. The top of the unit is made of 25mm thick particle board duly post formed having half round shape on the front edge
and rest of the sides banded with 1.5mm thick PVC edge banding of matching colour. The unit is duly covered with 4 Nos. of shutters made out with 18mm particle board with post formed finish and half round edges fitted with auto hinges, handle, one lock and all other hardware/accessories as per design and direction of Engineer-in-charge.
Supply of Executive High Back Chair. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholsted with foam laminated mesh fabric the insert moulded foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly, size of back shall be (W) 48.5cm (H) 62.0 cm and size of seat shall be (W) 52.5cm x (D) 51.0 cm arm set shall be injection moulded with height adjustable upto 4.5 +/- 0.5 cm in 3 steps and with adjustable up to 20mm. The neck rest assembly shall made up of polyurethane foam upholstered with form laminated mesh fabric. The neck rest assembly in mounted on the top of back. The Chair shall be provided with pneumatic height adjustment which shall have stork of 9.0 +/- 0.3 cm complete in all respect as per design and approved by Engineer-in-charge.
STORAGE UNIT (ALMIRAH) The structure is made out with 16mm"thick. |particleboard with matching colour and rest of the sides edge banded with 1.5mm thick PVC edge banding of matching colour. The unit is duly covered with shutters made out with 18mm particleboard with post formed finish and half round edges fitted with auto] hinges, handles, one lock and ail other hardware/accessories as per design & as 'approved by Engineer-in-charge.
MODULAR WORK STATION (60MM THICK) Seal Size : 1200 x 600 x 1200mm (LxWxH) PARTITION: There would be partition panels of overall thickness of 60mm +0.5mm of minimum Blow sizes fixed in £ cross sectional-fashion with the help of a right angle/straight connectors of suitable size, as per requirement and drawing. The panel would be made with a combination o Aluminum sections of overall thickness of 60mm and MDF board sandwich panels of an overall thickness of 57mm +1mm.
The lower section of the partition panel will be of height 750mm up to the worktop and it will be covered with Laminate of matching color on both sides of the panel. The partition portion just above the worktop of height 164mm will be provided with a Matching Mica Laminated board on both side. The partition panel will have a cable raceway management system in the bottom of an overall size of 100mm x 60mm. The inner side having a cable management system which provides a usable area of 90mm x 57mm. The cable management system is provided with a bottom cable raceway cover of 100mm width for easy laying of cables. The cover is having half round push fit arrangement for easy opening and compact fixing of cable raceway.
Each aluminum partition section will be duly powder coated with matching colour of minimum 40-60 microns thickness, and it should be able to withstand minimum 1000 hrs. of salt spray test/impact resistance of 150 kgcm.
The worktop will be made out of 25mm thick particle board post formed with matching colour laminate with half round post forming, on the |rear end and 1.5mm thick PVC edge banding on both sides. The worktop will be joined with proper jointers and dowels. PEDESTAL UNIT: |The drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated board, having three number of drawer units, the one top units of 6" depth each and the bottom drawer of 15" depth. The front, shutters matching with top surface in quarter round post formed shutters and mounted on I steel telescopic channels including necessary hardwares handle locks etc. ACCESSORIES: Provision with each seat one keyboard tray (Metallic), CPU trolley ( Metallic ).
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid