N-PAR/C/O and MC1/CAD/6000005756

Amount

Fabrication & repairing of Ist stage helical gear, cooling tower Gear box Model No.32.2

Fabrication & repairing of IInd stage helical gear, cooling tower Gear box Model No.32.2

Fabrication & repairing of worm shaft of gear box of ETP Plant.

Strengthening, repairing & reconditioning of ACW pump Impeller shaft/line shaft/top shaft of ACW pump.

Fabrication of line shaft sleeve/Top shaft sleeve for ACW Pump and fitting over the shafts including material (MOC: SS-316

Fabrication, repairing & reconditioning including dynamic balancing of Impeller of ACW Pump (MOC: SS-ASTM-A351-CF8M)

Fabrication & reconditioning of pump shaft from old & used material (SS-304)

Fabrication of top shaft sleeve/Line shaft sleeve (SS-316)

Repairing & reconditioning with dynamic balancing (Metalizing & machining) of impeller for raw water pump (SS-A 351)

Making of required sized bore in different couplings and making required size keyway.

Fabrication & supply of NBM rubber bush of CT fan

Fabrication & supply of hub of gear box of 32.2 series

Fabrication & supply of bronze bush chiller/condenser pump of AC system

Fabrication & supply of sleeve of ETP pump

Fabrication & reconditioning of pump shaft from old & used material (SS-304) of top/line/impeller shaft of ETP pumps model 80/40,80/32,125/32

Fabrication of key of shaft of ETP pump as per sample

Fabrication & supply of Teflon washer of different sizes in chlorination plant as per sample

Fabrication of coupling pump side flexible as per sample (Old & Used)

Fitment and supply of set of oil seal as per sample.

Repairing of Impeller along with its dynamic balancing

Fabrication of rubber bush for spider (Neoprene Rubber)

Fabrication of Shaft Sleeve OD-70mm and ID-60mm Length-230mm (Service water 250 MW/ potable 210 MW)

Fabrication of Shaft Sleeve OD-40mm and ID-30mm Length-120mm (Potable/Alum Dosing/PE Dosing)

Fabrication of Shaft Sleeve OD-80mm and ID-65mm Length-240mm (CW make up)

Fabrication of Shaft Sleeve OD-60mm and ID-50mm Length-150mm (DM supply/Degasser/DM Transfer/UF feed/N-pit)

Fabrication of Shaft NB- 40mm and length-600mm (Potable/Alum Dosing/PE Dosing)

Fabrication of Shaft NB-60mm and length 1110 mm (CW make up)

Fabrication of Shaft NB-30mm and length 660 mm (DM supply/Degasser/DM Transfer/UF feed/N-pit)

Fabrication of Shaft NB-65 mm and length 700 mm (Service water 250 MW/ potable 210 MW)

FABRICATION OF BUSH OF VALVE 50 NB

FABRICATION OF BUSH OF VALVE 100 NB

Fabrication of Shaft of Sludge Disposal Pump 2x250 MW

Fabrication of Glass Filled Teflon Bush of Sludge Disposal Pump 2x250 MW

Repairing of Bearing Housing with Bearing Cover of DM Supply/Degasser/DM transfer/N-pit Pump as per sample or drawing

Repairing of Bearing Housing with Bearing Cover of CW Make-up Pump as per sample or drawing

Fabrication and Machining of supplied fitted keys upto flatness tolerance of 0.01 mm and coupling bolt of tolerance 0.05 mm/

Internal boring and cutting of keyway in pump half and motor half coupling

Repairing of Glove/Check valve (NB-100/150/200 mm)

Repairing of Gate valve/Diaphragm Valve (NB-40 to 200 mm)

Fabrication & supply of Flange coupling of clinker grinder as per sample

Fabrication & supply of pinion shaft of clinker grinder gear box as per sample

Repairing of worn out bore & keyway of flange coupling of clinker grinder gear box to fluid coupling

Repairing of spray nozzle with replacement of teflon bushing with new one of jet pump of clinker grinder .

Repairing/Rectification/complete overhauling of gear box

Repairing of worn out keyway of input & output pinion as per sample

Fabrication of key of pinion shaft as per sample

Fabrication of final pinion shaft as per sample

Fabrication of key for ash intake valve as per sample

Fabrication of spring stop guide of air intake valve 16x200,10x50mm as per sample

Fabrication of shaft sleeve SS410 of clinker grinder

Repairing of glove valve/check valve (NB-100mm/150mm/200mm/250mm)

Repairing of gate valve (NB-100mm/150mm/200mm/250mm)

Fabrication of thrust pad of ESP unit 5&6

Fabrication of inner arm of ESP unit 5&6

Fabrication of split bearing of ESP unit 5&6

Fabrication bush split bearing of ESP unit 5&6

Fabrication of Plain bearing of ESP unit 5 &6

Making bore & keyway in various item C.G

Repairing of shaft seal housing of C.G

Fabrication bronze lantern ring C.G as per sample

Fabrication of gland cover of Clinker grinder as per sample

Fabrication of gland bush of clinker grinder as per sample

Fabrication of short piece /distance piece of CT Tower Tank as per sample

Fabrication of hand hole cover of ash intake valve

Repairing of shaft sleeve ash slurry pump

Repairing of pump casing Ash slurry pump

Repairing and machining of body of 200 NB double disc valve

Repairing and machining of body of 200 NB branch isolation valve

Repairing and machining of ash intake valve 200 NB

Repairing bore keyway motor side/pump side flange coupling BAHP/FAHP/ECO/SEAL/Fluid coupling SC-09 etc.

Making bore& keyway in motor side /pump side V-Belt pulley.

Repairing of power cylinder of BAH

Repairing & machining and check runout of old & used shaft of ash slurry pump/BAOFpump/BAHP Pump/BALP pump/Eco. Pump/Darin Pump.etc.

Repairing and machining of bearing housing of ash slurry pump/BAHP pump/ Clinker grinder /BAOF pump/Draing pump/Sludge Pump etc.

HIND UDYOG

A S Enterprises