Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹24.1 L+₹1.2 L (5.43%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L2 | Rejected-Finance Being Other than lowest | |
| 3 | L3₹24.8 L+₹1.9 L (8.24%)Rejected-Finance 08 PINK ENCLAVE MAHESH NAGAR BALAJI VIHAR GOPALPURA JAIPUR RAJASTHAN 302015 INDIA | JAIPUR | RAJASTHAN | 302015 | L3 | Rejected-Finance Being Other than lowest | |
| 4 | L4₹25.2 L+₹2.3 L (10.1%)Rejected-Finance | L4 | Rejected-Finance Being Other than lowest | |
| 5 | L5₹25.3 L+₹2.4 L (10.4%)Rejected-Finance 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L5 | Rejected-Finance Being Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
WELCOME MAINT AND INTERNAL PERIODICAL SERVICES IN ZONE-II AND ZONE-III IN THE AOR OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
2022_MES_533706_1
GE/DE-13/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹90,000
Yes
14 Sept 2022
25 Jun 2022
25 Jul 2022
25 Jun 2022
23 Jul 2022
17 Jul 2022
Amount
M&L Preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper including wall care putty of 1mm thick after removal of existing treatment by scrapping down complete all as specified and directed.
M&L Preparation of old plastered surfaces of ceiling and applying two coats of Oil bound distember on walls including wall care putty of 1mm thick after removal of existing treatment by scrapping down with mechanical grinder incl preparation of surfaces with sand papering and filling pot holes with putty as reqd complete all as specified and directed
M&L two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified.
M&L two coats of synthetic enamel paint on steel painted surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or grith complete all as specified and directed.
M & L for two coats of cement base paint on old wall surface incl preperation of surfaces with sand papering and filling pot holes with putty as reqd complete removal of existing treatment .
Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified.
M&L 10-12mm thick polymer modified readymix cement based plaster make ultratech (brand name readiplast) or equivalent in ratio 1:4 on brick or concrete surfaces etc (wall and ceiling) finish the even and fair as directed.
M&L Preparation of new plastered surfaces of walls and applying two coats of Oil bound distember on walls including all care putty on newly plastered walls of 1 mm thick complete.
M&L Preparation of new plastered surfaces of ceiling and applying two coats of Oil bound distember on walls including all care putty on newly plastered walls of 1mm thick complete.
M&L Preparation of new plastered surfaces of walls and applying two coats of two coat of cement base paint on walls including all care putty on newly plastered walls of 1 mm thick complete.
M&L for preparation of new /old decorated external wall surface by complete removal of existing treatement by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechincal removeal is not possible and applying a layer of 2 mm thick wall care putty, again sand papering thus making surface smooth and applying two coat of wheather proofing exterior acrylic emulsion paint premium quality Make : {BERGER (WEATHER COAT ALL GUARD)/ ASIAN (APEX ULTIMA)/ NEROLAC (EXCEL TOTAL} on wall surfaces complete all as specified.
Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed. (Make : SmartCare Damp Block 2K/Dr. Fixit (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Five years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square exc 0.5 sq.m. in each pane complete all as specified and directed.
S&F in stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. (Note- Welder with welding machine reqd to fix wiremesh in old steel windows)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.
M&L Vitrified Ceramic Coloured tiles 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bed in CM 1:6 complete.
All same as per serial item No 19 herein before but in skirting with rendering 10mm thick in CM1:4 complete.
M&L coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.
M&L glazed coloured ceremic tiles sizes 450x300x 7-8mm thk tiles on vertical surfaces , such as skirting/dado ,incl 10 mm rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.
M/s Shubh Enterprises
Simran construction Company
DEV CONSTRUCTION
R. S. Associates
STAR CONSTRUCTION CO
GAUTAM ELECTRIC WORKS
M/S VERMA BUILDER
MAA SANTOSHI ENTERPRISES
Baljeet Builders & Interior Decorators
S GOURAV PRAKASH ENTERPRISES
M/S Laxmi Construction
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .