REPAIR REPLACEMENT MAINTENANCE TO INTERNAL ELECTRIFICATION WITH CERTAIN ALLIED WORKS AT VARIOUS EM INSTALLATION AT RCI TECHNICAL AREA RESIDENTIAL AREA UNDER GE I RND RCI HYDERABAD

Amount

Taking down point wiring of any description from surface/concealed conduit for light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials from site and making good disturbed surfaces of walls, floors, etc., to match with the existing complete all as directed.

M&L, Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) and accessories fixed to surface of walls/roof/ceiling with PVC sleeve/dash fastener and cadmium plated screws etc., with and including modular metal flush boxes made out of 1.6mm mild steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- Note: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.

One light/fan point controlled by one, one way switch, 5/6 Amps

One socket outlet, 3 pin, 5/6Amps, controlled by one way switch on same board with other switches.

One socket outlet, 3 pin, 5/6Amps, on independent board controlled by one way switch.

All as per item No. 2 above but with 2.5Sqmm FRLSH cable for 5pin 15Amps socket outlet on independent board and 2.5Sqmm FRLSH cable for the earth continuity conductor.

S&F in replacement, Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F in replacement, Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F in replacement, Modular Socket, 6Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F in replacement, Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F in replacement, Modular step type fan regulator, 120W, 2 module complete all as specified and directed.

S&F in replacement, Ceiling rose, surface type Bakelite, three terminal 65x50mm, ISI marked complete all as specified and directed.

M&L in replacement, Sub main wiring with 2runs of single core 4Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 4sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L in replacement, Sub main wiring with 2runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note for item No 11 & 12: Two runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

M&L in replacement, Sub main wiring with 4runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 25mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note : Four runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

S&F in replacement, MCB, SPN, 63Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand / L&T/ Siemens/Schneider/C&S as approved by GE

S&F in replacement, MCB, SP, 6 to 40Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand / Siemens / L&T / Schneider/C&S as approved by GE

S&F in replacement, Isolator TP, 40Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand /Siemens / L&T / Schneider/C&S as approved by GE

S&F in replacement, Isolator TP, 63Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand /Siemens / L&T / Schneider/C&S as approved by GE

S&F in replacement, factory made sheet metal enclosure distribution board (MCCB DB) TPN 4Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in replacement, factory made sheet metal enclosure distribution board (MCCB DB) TPN 8Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in replacement,CRCA sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 8 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed.

Taking down the existing unserviceable ceiling fan of any make/ model and sweep for overhauling / servicing after disconnecting carefully cleaning and checking for unserviceable components, and replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor flexible chord and shaft / painting etc., including assembling after lubricating the movable components and installing in its original position connecting, testing and commissioning all as specified and directed by the Engineer-in-charge.

All as per item No.20 above but single phase Exhaust fans and Air Circulator from any height installed in workshops. Note:- Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor/ Rewinding / cord flexiable / shaft shall be measured and paid separately under relavent items of Sch ‘A’.

Supply & fixing rubber bush/bolt /clamps and connected items suitable for ceiling fan of any make/model/ type sweep of 1200/1400 mm all as specified and directed

Supplyand fixing shaft suitable for ceiling fan / Exhaust fan/ pedestal fan/ wall mounted fan/ Air circulator of any make/model and sweep with necessary machining work all as specified and directed by the Engineer-in-charge.

Supply and fixing cord flexible copper conductor, twin core 0.50 Sqmm 1.5m long PVC insulated unsheathed 415 volts grade for ceiling fans all as specified and directed by the Engineer-in-charge. Make : Finolex/Fine Cab

M & L for rewinding of any make/model of fans including removal of existing burnt windings carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper conductor of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings nd applying air dry insulating arnish and drying the windings thoroughly all as specified and directed for :-

Ceiling fan of 1200 / 1400 mm sweep.

Exhaust fan of 230/300mm sweep, Pedestal/ wall mounted fan of 400 mm sweep

Supply only ball bearing suitable for ceiling fan / wall mounting fan/Pedestal fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge. Make : SKF/NBC/TATA/Usha

All as per Item No.26 above but for Exhaust fan / air cirulator of any make / model / sweep.

Supply only gunmetal bush suitable for ceiling fan / wall mounting fan/Pedestal fans of any make/model/ sweep and Exhaust fan of any sweep with necessary machining work as per requirement all as specified and directed by the Engineer-in charge.

S&F fan down rod 1.5/2.0/2.5 complete all as specified and directed.

Supply only capacitor 2.5 mfd suitable for ceiling fan and testing complete all as directed by Engineer-in-charge Make- Tibcon/Capco.

Supply only capacitor 3.5/4 mfd suitable for ceiling fan and testing complete all as directed by Engineer-in-charge Make- Havells/Tibcon/Capco.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm heavy duty sweep with, blades, and frame and louvers

S&F in repairs, LED Highbay less than 120W powder coated light fitting suitable for suspension mounting at any height in Hangers/Workshop with aluminum alloy pressure die cast housing and control gear box with high efficiency long life LEDs with lumen output not less than 15000lm, CCT 5700 K or above with specified beam angle to ensure better uniformity of light distribution, IP65 Protection and impact resistance of IK07, built in electronic driver, lower THD, open circuit protection, over surge and voltage protection complete with all accessories complete all as specified. Make: Havells CAT No. SAUCERGENXPROHBP120WLED 757P60DBOLTG or Philips CAT No BY 515P LED 1505 5700 NB PSU GR or Techno commercially equivalent in Wipro.

Supply & Fix, LED floodlight 100W system lumens output 10000lm, luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5700K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK07. Power Factor >0.95 with mains, Surge Protection- Min 10KV along with Over voltage/ Overload, short circuit/ miss-wiring protection with other safety test as per IS 15885 Part-2/Sec 13. Universal Voltage driver to operate wide voltage range from 100 V to 270V, 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB . LED Light fixture with 100W System Power consumption. LED Efficiency> 120m/w, nominal CRI >70. Luminaire manufacturer should have in- house facility accredited by NABL certified agency & Design & Development facility certified by ISO 9001:2008. BIS approval for Both Driver and the luminaire needs to be submitted for records. LUMINAIRE MAKE : Havells: JETAALBAPROFL100WLED757PWBLTG Equivalent in Philips or Wipro. LED MAKE Lumileds / Cree /Osram/ Bridgelux / Seoul.

Supply & Fix, 25W LED Decorative Postop, Aesthetically designed LED post Top with aluminium enclosure and die casted heat sink exhibits classic look with symmetrical light distribution and excellent heat dissipation for long life. Family of post top, lantern designed to complement the geometry of the area Die-cast aluminum spigot for mounting LED driver and spun aluminum canopy which is painted white inside. Opening seperate driver compartment with IP65 protection and impact resistance of IK07.Operating temperature: -10°C to + 50°C, Operating voltage range: 140-270V, Average life L70B50: 50000 hours, High efficiency long life LED module with SMD , LED package mounted on MCPCB. Lumen, efficacy of LED >140 lm/W, Powered by built-in potted LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 415V AC), Over, Voltage protection, Surge Voltage protection upto, 4 kv with SPD & other safety test as per IS 15885 Part-2/Sec 13. THD< 10%, PF>.95, Current= 0.120A, CCT 5700K Havells Cat Ref: RUBYPT25WLED757SSYMTOPC Or Equivalent / Philips Wipro. LED MAKE Lumileds / Cree /Osram/ Bridgelux / Seoul.

S&F in repairs, flat panel 4x1, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLANOSURFACE4X1PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, basic all purpose surface or wall mounted 20W LED batten with polycarbonate housing and integratedelectronic driver complete all as specified. Make: Havells Cat No LUMILINEBS20WLED865SPCWH or techno commercially equivalent of Phillips / Wipro

S&F in repairs, basic all purpose surface or wall mounted 9W LED batten with polycarbonate housing and integratedelectronic driver complete all as specified. Make: Havells Cat No LUMILINEBS9WLED865SPCWH or techno commercially equivalent of Phillips / Wipro

S&F in repairs, universal batten for fixing T5/T8 LED tube rods with polycarbobnate housing complete all as specified. Make: Havells Cat No REGALBATTENT8UPTO1X22 WSSBSWH or techno commercially equivalent of Phillips / Wipro

S&F in repairs, ultra bright LED polycarbonate tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAE2.01213T8SSTL20WLED865SPC or techno commercially equivalent of Phillips / Wipro

Note: 1. Rate quoted shall be deemed to include the cost of necessary hydraulic ladder or aerial access platform mounted on vehicle for fixing the light fittings.

LEOENTERPRISES (BID ID -3342646)

DPS sales and services india (BID ID -3342968)

omsai thermax engineers (BID ID -3343008)

EXELLENT POWER CORPORATION (BID ID -3343092)

Anjana corporation (BID ID -3343235)

SRI SAI ENTERPRISES (BID ID -3342506)

Maruthi international (BID ID -3342158)

SUN LIGHT HOUSE (BID ID -3343268)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3343436)