PAINTING AND POLISHING AND CERTAIN REPAIR OF STEEL

Amount

M&L for Removing old unserviceable , upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth and tapestry cloth of Sofa Sets placed at NOM Varuna and S&F the new approved upholstery including subsidiary items of materials like FRC sheet Markeen and Melamine polish on wooden surfaces exposed to view after completion of upholstery work. Note : Colour, shade, texture design pattern and quality of tapestry cloth and polish shall be as approved by GE. The cost of tapestry cloth shall not be more than Rs. 800.00 per RM complete all as directed by Engr-in-Charge for the followings :- (a) REPAIR TO WOODEN SOFA SET (TWO SEATER) 1A (TP)

(b) REPAIR TO FULLY UPHOLSTRED SOFA SET 3A (TWO SEATER) (TP)

(c) REPAIR TO FULLY UPHOLSTRED SOFA SET 3B (SINGLE SEATER) (TP)

(d) REPAIR TO FULLY UPHOLSTRED SOFA SET 1A (TWO SEATER) (TP)

(e) REPAIR TO FULLY UPHOLSTRED SOFA SET 1B (SINGLE SEATER) (TP)

REPAIR TO TABLE BED SIDE STEEL (FD/E6/MAP/15(R) Removing of unserviceable components in any position, S&F new components made out of 18/19 mm thick exterior grade MDF board of approved shade (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws make the unit in serviceable from srl No. 7.01 to 7.07 shape and size all as specified on drg and as directed by Engr-in-Charge. (a) Sides of Table Bed side made of MDF ext grade board

(b) Back of the table bed side made of MDF ext grade board

(c) Top of the table bed side made of MDF ext grade board

(d) S&F new top drawers made of MDF board of exterior grade with SS Handle.

Removing of unserviceable channels in any position, S&F new steel channels with screws (ISI Marked).

S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)- Removing of old unserviceable ply top from existing charpoy GI pipe ply top and S&F the new 12mm thick BWR commercial plywood with unpolished edging(ISI marked) suitable for charpoy GI pipe having approximate size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts of size 70mm x 06mm with GI washer (Heavy Weight) complete all as directed.

M&L for dismantling of existing unserviceable broken long rail and S& F new long rail of GI pipe Med grade 32 mm bore ISI marked including threading at both ends complete all as specified and directed.

M&L for dismantling of unserviceable short rail and cutting of old long rail from Sr No. 8.02 to the required size for short rail including rethreading at both ends complete all as specified.

Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 8.03 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.

M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI pipe med grade 32 mm bore pipe complete all as specified and directed.

S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore to GI pipe charpoy of approved make complete all as specified.

REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)- Removing of old unserviceable ply top from existing charpoy and S&F the new 12mm thick BWR commercial plywood with unpolished edging(ISI marked) suitable for charpoy having approximate size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gas welding of existing frame before fixing the ply all as per drg and as directed

Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Charpoy IP with two coats of synthetic enamel paint in black after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) - S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR, conforming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of MS nuts, bolts and washers without having any joints shape and size as per drg and as directed by Engr-in-Charge.

REPAIR TO HEAD REST BOARD : Removing of unserviceable Head Rest board and S&F new head Rest board to be made of 18 mm thick Exterior grade MDF board as approved shade (ISI Marked) with PVC beading all around , fixing with suitable screws to cleats of the head board as specified on drg and as directed by Engr-in-Charge.

REPAIR TO FOOT REST BOARD : As per Srl No. 23, but Foot Rest Board.

M&L Scraping of existing coats of paints filing, finishing and painting of Bed hard steel with two coats of synthetic enamel paint with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F new PVC hard rubber shoes as per drg or as directed by Engr-in-Charge.

M&L for removing the existing broken or unserviceable components of wooden furniture items as given below including preparation, S&F New Ist class hard wood well seasoned free from cracks and dead knots (Teak Wood) including two coats of french polish to all replaced and old existing components complete and to match the original all as specified in drawings and as directed by Engineer-in-Charge :

REPAIR TO TABLE DINING 4 PERS (FD/MAP-II/03) - Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF board of approved shade (ISI Marked)duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

Long Rail made of Ist class hard wood (Teak wood).

Short Side Rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO CHAIR DINING JCOs/ORs (FD/MAP-II/15) : Removing of unserviceable seat, S&F, new PVC seat of chair shall be made from PVC seat 4x10 mm thick ribs moulded along with seat in single piece. PVC seat 4 mm thick hole and wt of PVC seat is not less than 0.5 Kg. as per shown in drg & as directed by the Engr-in-Charge.

Stiffeners Made of 1st Class hard wood (Teak Wood).

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front Legs Made of 1st Class hard wood (Teak Wood).

Side Rails Made of 1st Class hard wood (Teak Wood).

New wooden corner brackets of size 65x65x25 mm.

S&F PVC shoes to Chair Dining of white color as approved by Engr-in-charge.

M&L for french polishing and normal repair of existing chair dining like mild grinding of outer surface , hammering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engineer-in Charge.

REPAIR TO CHAIR DINING (FD-279) : Stiffeners Made of 1st Class hard wood (Teak Wood).

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front Legs Made of 1st Class hard wood (Teak Wood).

Side Rails Made of 1st Class hard wood (Teak Wood).

Bend Stiffener Made of 1st Class hard wood (Teak Wood).

New wooden corner brackets of size 65x65x25 mm.

S&F PVC shoes to Chair Dining of white color as approved by Engr-in-charge.

M&L for french polishing and normal repair of existing chair dining like mild grinding of outer surface, hammering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engr-in-Charge.

REPAIR TO CHAIR EASY (FD-229) : Front Legs Made of 1st Class hard wood (Teak Wood).

Side Rails Made of 1st Class hard wood (Teak Wood).

Front/Back Rails Made of 1st Class hard wood (Teak Wood).

Arms Made of 1st Class hard wood (Teak Wood).

S&F PVC shoes to Chair Easy of white color as approved by Engr-in-charge.

M&L for french polishing and normal repair of existing chair easy like mild grinding of outer surface , hammering of nails fill up of micro cracks with fevicol and wooden putty etc complete all as directed by the Engineer-in Charge.

REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD-251/378/FD/MAP-II/07) - S&F in repair , unserviceable looking mirror 5 mm thick along with new 6 mm thick commercial plywood back of mirror frame all as specified , shown on drg and as directed

S&F in replacement of unserviceable cushion with tapestry cloth of approved color/shade for stool table dressing shape and size shown in drg and as directed by Engr-in-Charge.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO TABLE DRESSING GENTS WITH MIRROR (TP) - S&F in repair , unserviceable looking mirror 5 mm thick alongwith new 6 mm thick commercial plywood back of mirror frame all as specified , shown on drg and as directed.

French polish on old wood surfaces including preparation of old surfaces all as specified and filling of cracks with putty. (a) Wood based surface direct to vision glossy shining when placed in position.(b) color of polish as per user requirements or as approved by Engr-in-Charge.

REPAIR TO ALMIRAH MED STEEL DRG (FD-1032) : Dismantling of unserviceable bottom legs, S& F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding.

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed.

S&F in replacement of unserviceable shelves with new shelves to be made of 1 mm thick MS sheet duly painted made shape and size as specified in drg or as directed by Engr -in-Charge.

Dismantling of unserviceable bushes of locking assembly and S&F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable CP handles OF Almirah Med & Almirah large steel and S&F new CP handles of approved quality as specified and directed by Engr -in-Charge.

Dismantling of unserviceable locks of Almirah Med & Almirah large and S&F new locks of approved brand as specified and shown in drg.

M&L for dismantling of existing unserviceable MS Butt Hinges of Almirah Med, Almirah large, Locker bed side steel & S&F new MS Butt Hinges with suitable MS screws as per specification and as per drg. 75 mm long medium, quality of approved pattern complete all as specified and directed by Engr-in-charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filing, finishing and painting of Almirah Medium Steel with two coats of synthetic enamel paint in dual shade of approved color with spray including complete removal of existing paint over a coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO TABLE OFFICE CLERK STEEL FD-381 : Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF board of approved shade (ISI Marked)duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed by Engr-in-Charge.

S&F New drawers with appropriate size of sheet as existing as per drg and as directed by Engr-in-Charge.

Denting/bending/rewelding Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade using spray after giving a primer coat with red oxide as per specification and as shown on drg and directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

REPAIR TO TABLE OFFICE OFFICERS STEEL FD-381/1004 : Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF board of approved shade (ISI Marked)duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed by Engr-in-Charge.

S&F New drawers with appropriate size of sheet as existing as per drg and as directed by Engr-in-Charge.

Denting/bending/rewelding Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade using spray after giving a primer coat with red oxide as per specification and as shown on drg and directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

TEAPOY VERANDAH. (FD- 255) : Removing of unserviceable top in any position, S&F new top made out of 18/19 mm thick exterior grade MDF board of approved shade (ISI Marked)duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

M&L with gas welding to broken components of steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge.

M&L painting of Teapoy Veranda steel frame with two coat of synthetic enamel paint of white shade of after removing the rubber shoes including preparation of old surface by mild grinding, applying a primer coat of red oxide all as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

REPAIR TO CHAIR DINING -2 (TP) : S&F in replacement of unserviceable seat and back of chair dining long back and upholstering the same as per existing pattern with seat and back with 100 mm (TP) thickness 40 density as specified and as directed by the Engr-in-Charge

M & L melamine polishing on wooden surfaces exposed to view after completion of upholstery work. quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

REPAIR TO CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) : Removing of existing unserviceable complete seat of chair and S&F new PVC seat of approved brand and color with suitable screws including tightening of loose joints of existing frame before fixing the seat with steel frame as shown in drg as directed by the Engr-in-Charge.

Removing of unserviceable writing hand board in any position, S&F new hand board with suitable size of screws with PVC lining made out of 18/19 mm thick exterior grade MDF prelaminated board of approved shade (ISI Marked) shape and size all as specified on drg and as directed by Engr-in-Charge.

S&F the clips for tightening of the bottom tray with suitable screws/nuts bolts to the frame as directed by the Engr-in-Charge.

Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Chair School with hand board with two coats of synthetic enamel paint in black after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO CHAIR WRITING (TP) Labour for removing the existing worn out/ unserviceable seat of chair Writing and S & F new seat frame of size 500x450mm made from 12 mm thick Hot pressed Plywood with moulded polyurethane Foam 50mm thick with density 50-55 Kg per cubic Mtr, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge.

All as per Sl. No. 89 but for Back of Chair Writing of size 500x450mm

S&F Rubber Stoppers with appropriate size of MS screws

Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed for the Engr-in-Charge.

Removing of existing unserviceable old cane and recaning of chair dining & Chair Easy with new plastic cane , white 2.00 mm wide for seat half round of 0.4 mm thick and border caning 3.5 , 3.00, wide plastic cane of brand SHAH/Premier including with normal repair and as directed by the Engr-in-Charge.

TABLE DINING-I (TP) : M & L melamine polishing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

CHAIR EASY-2, 3 & 4 (TP) : M & L melamine polishing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

CHAIR DINING-2 (TP) : M & L for melamine polishing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

TABLE CENTRE-1, 2, 3, 7 & 8 (TP) : M & L for melamine polishing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

PEG TABLE1, 2, 3, 4 & 5 (TP) : M & L for melamine polishing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

SIDE BOARD WITH MIRROR-1 & 2 (TP) : M & L for melamine polishing on wooden surfaces including preparation of old surfaces exposed to view quality of polish shall be as approved by GE complete all as directed by Engr-in-Charge.

Removing unserviceable plywood from Charpoy folding and providing 8/9mm thick plywood BWP Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade.Rest all as per drawing & as directed by engr-in-chage.(DRG NO. FD-388(R) )

Chair Computer :-(a) The seat and back shall be made up of 12mm thick hot pressed plywood upholstered with acrylic fabric of approved shade and moulded polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. The seat size shall be of 510x470x60mm.

Table writing:- (a) The top & cabinet below drawer shall be made of 18mm thick pre laminated MDF board confirming to Grade-I & Type-II (PLMDF-12 Designation) as per IS-14587:1998 (reaffirmed 2003) (b) The side & back of drawers shall be of 13mm thick plan MDF board, confirming to Grade-I (SBG-i) in terms of IS-12406-2003 irrespective to what shown on drg. (c) The plain/ Pre laminated MDF board shall confirm to the specific requirements given for “ECO- MARK” under relevant clauses of the standard. (d) All the timber parts shall be the first class teak wood free from cracks, knots and any defects. The surfaces shall be French polished till obtaining glossy finish. (e) Powder coated MS angular plates each of 150x30x5mm thick shall be screwed to the legs at right angles with long rails & short rails for extra strength. (f) The drawer shall be fitted on 1.6mm thick powder coated telescopic channels with proper wooden packing if required. (g) Rest all as per drg & as specified

M/S MG GROUP

SMS Enterprises

M/S NEHAL ENTERPRISES