Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹19.7 L+₹1.4 L (7.86%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹18.5 L
EMD Value
₹37,000
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 Wks Engr PIN 914137 c/o 99 APO
SPECIAL REPAIR TO BLDG NO T-462 (OR LIVING) AT ZAKHAMA MIL STN
2023_MES_630209_2
8838/E8
Open Tender
Civil Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹37,000
Yes
30 Mar 2024
8 Feb 2024
13 Mar 2024
8 Feb 2024
6 Mar 2024
16 Feb 2024
Amount
Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and directed.
Material and labour for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc with and including Brushing neat cement slurry @ 3.00 Kg cement per Sqm complete all as specified and directed. complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for Non - skid coloured Ceramic tiles (No. 1 quality / Premium quality) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar 1:4 complete all as specified and as directed.
Material and labour for cloured glazed ceramic tiles (No. 1 quality / Premium quality) in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM(1:4) complete all as specified and as directed.
Material and labour for pre-painted precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as per manufactures instruction complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as per manufactures instruction complete all as specified and as directed.
Supply and fixing 0.63mm thick Plain, galvanised, mild steel sheeting in stepped flashings/wall (measured as the minimum rectangle from which the pieces can be cut) etc and fixed with nails complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as directed.
Material and labour for well seasoned 2nd class hard wood timber in scantlings, clean sawn, timber framed and fixed complete all as specified and as directed.
Material and labour for 4mm thick plywood,grade BWR, type BB, fixed with screw to timber frame work fixed with screw to timber frame work complete all as specified and as directed.
Supply and fixing Non asbestos fiber cement board 6mm thick fixed in abodised aluminium snap grid frame work size 605x 605mm for false ceiling including suspenders/hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof shads by means of cleat made out of GI flat 40x3 mm size 60mm long and expension hold fasteners dia 40mm long complete all as specified as per manufactureres instruction.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick/concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed.
Materials and labour for 15 mm thick rendering on fair faces of brick work mixed with water proofing compound as manufacturer instructions in cement mortar (1:4) on wall and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid seperately
Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound (WPC) of best quality (ISI marked) complete all as specified and as directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.
Materials and labour for preparation of old plastered / unplastered external wall surfaces by brooming down with steel wire brush and applying one coat of cement base paint complete all as specified and as directed.
Materials and labour for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
Supply & fixing 3mm thick sheet glass ordinary quality & glazing with oil putty, glazing pin in squares n exc 0.5 sqm in each pane complete all as specified and as directed.
Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and as directed.
Taking down wooden shutters of any description exc 1.00 Sqm but n.exc. 2 Sqm each and re-fixing the shutter in the same opening after necessary repair / replacement complete all as specified and as directed.
Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.
Material and labour for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Sec-tion 8, clause 8.24 (a) complete all as specified and as directed.
Supply and fix galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Supply and fixing in rep galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.
Taking down wooden chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification complete all as specified and as directed.
Supply & fixing 100 mm size Butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.
Supply and fixing 250mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
Supply and fixing aluminium anodized, barrel tower bolts, 100mm long and 10mm dia of extruded section complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and as directed.
Supply and fixing aluminium anodized, barrel tower bolts, 150mm long and 10mm dia of extruded section complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed.
Taking up or down 15mm bore steel water tubing & connections complete all as specified and as directed..
Taking up or down 20mm bore steel water tubing & connections complete all as specified and as directed..
Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
Supply, hoisting and fixing in proper position ISI marked Three-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 20mm bore PTMT float ball valve and flynut, screwed for iron pipe or brass ferrule set including providing necessary connections complete all as specified and as directed .
Supply and fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing in rep as in replacement Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.
Supply and fixing in rep 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in rep 15mm bore bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe for brass ferrule and fixed complete all as specified and as directed.
Supply and fixing 15mm bore stop cock,fancy type chromium plated each with long shank ans cup fixed to GI pipe complete all as specified and as directed.
Supply and fixing for vitreoues china WHB, white, flat back, of size 550X400mm including pillar tap,cast copper alloy,Chromium plated,fancy type,15mm dia with capstan head,screwed down high pressure with or with out lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe and 32mm dia PTMT waste coupling with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings incl CI bracket, cutting for end pinning in ends of brackets or erecting stand, 32mm bore PVC flexible waste pipe,PVC connection of 15mm bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed.
Supply and fixing vitreous china bowl pattern urinal, flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe and 32mm dia PVC flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
Supply and Fixing repair 18/19 mm thick interior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with nail for pelmet boxesin timber frame work/shutters complete all as specified and as directed.
Supply and Fixing as in replacement 19/20mm dia mild steel chromiun plated curtain rods with and including fixing socket complete all as specified and as directed.
Taking down carefully existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
All as per item No 70 above but for 3 pin,5 Amp switch Socket outlet on independent board complete all as specified and directed.
All as per item No 70 here in before but for one 3 pin 15 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor.
Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
Supply & fixing Switch socket combination 2 in 1, 3 pin, 15/16 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
Supply & fixing utility DB encloser with plug socket and MCB 20A complete all as specified and directed. Note: MCB and DB shall be of same make as approved by AGE (I).
Supply and fixing LED lights fitting 1x 20W, 220V,with necessary fitting and fixtures including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
Supply and fixing LED alminaire 600x600mm ,35/36 watt, 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driven three core flexible copper conductor cases of suitable size, including down old one complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
Supply and fixing LED security light fitting 35 Watt 30 volt AC outdoor type with high pressere die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including fixing bracket and pipe with accesories with IP 65/66 protection incl taking down old one,complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
Supply and fixing integrated LED bulk head with luminaire of 10W, 6000K with pressure die cast Aluminium housing,IP54 protection, heat resistant glass cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5sqmm complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified and directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 25mm, ISI marked three terminals complete all as specified and directed.
Supply & Fixing in rep MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.
Supply and fixing MCB 40 to 63 Amps, SPN, 240V, 10KA, 'C' curve miniature circuit breaker (MCB) of double poles and current carrying in the MCB DB complete with connecting testing and commissioning complete all as specified and as directed.
Supply and fixing MCB 6 to 32 Amps, SP, 240V, 10KA, 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connecting testing and commissioning complete all as specified and as directed. Note:for serial Item No 82 to 84: MCB and MCB DB shall be of same make as approved by AGE (I).
Supply and fix submain wiring with 2X6 sq mm along with earth wire 1X 6 sq mm FRLSH, PVC insulated copper conductor, single core, 1100 volt grade , surface drawn in and including PVC casing capping with fixtures and connected to common earth complete all as specified and directed. Note: (i) Two runs of 6 Sqmm cable and one run of PVC Casing capping of suitable size shall be measured as one unit. (ii) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.)
Supply and fix submain wiring with 2X4 sq mm along with earth wire 1X 4 sq mm FRLSH, PVC insulated copper conductor, single core, 1100 volt grade , surface drawn in and including PVC casing capping with fixtures and connected to common earth complete all as specified and directed. Note: (i) Two runs of 4 Sqmm cable and one run of PVC Casing capping of suitable size shall be measured as one unit. (ii) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.)
Supply and fix submain wiring with 2X2.5 sq mm along with earth wire 1X 2.5 sq mm FRLSH, PVC insulated copper conductor, single core, 1100 volt grade , surface drawn in and including PVC casing capping with fixtures and connected to common earth complete all as specified and directed. Note: (i) Two runs of 2.5 Sqmm cable and one run of PVC Casing capping of suitable size shall be measured as one unit. (ii) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.)
Dismantling house bracket service any type complete all as specified and directed.
Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy including dismantling of existing old unserviceable house service brackets, any type complete all as specified and as directed.
Supply and fixing 1100 volts grade heavy duty twin core 10 sqmm cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire complete all as specified and as directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Shri Atoshe Tuccu
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .