PROVN OF ROOF SHEET AND KOTA STONE FLOOR IN FRONT OF BLDG NO T153, PROVN OF KITCHEN SINK, PLATE RACK, JOINERY, PLUMBING WORKS AND EXAUST FAN IN BLDG NO P123, P124, P134, P136, P139 AND FOR 25 QTRS AT NEW PEKINS LINE GNC LINE UNDER GE CENTRAL BANGALOR

Amount

Excavating in post holes (or similar holes) in hard/dense soil each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface as directed.

Demolition of plain cement concrete (unreinforced) in ground floors, plinth protection/path/pavings etc not exceeding 15 cm thickness. (below or above ground level) and removing debris outside MD land complete all as specified and directed.

Demolition of cement concrete (Reinforced) any description and in any position not otherwise specifically provided for etc complete including cutting reinforement as required to facilitate demolition of concrete removing the materials out side MD land complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water including removing the same and debris outside MD landcomplete all as specified and directed

Taking down shutters, exceeding 1.0 sqm but n.exc. 2 Sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.

Cutting hole through brick masonry/stone masonry wall of half brick thich wall built in cement mortar and making good the disturbed surfaces using cement mortar 1:4 as required complete all as directed.

S & F second class hard wood fillets, wrought, square rectangular or triangular in section secured with nails, cross sectional area exc 13 and not exc 25 sqcm etc including two coat of painting using synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F 35 mm thick, second class hardwood glazed/gauged and skeleton shutters as in door open rebated and prepared to receive glass, gauge, etc,(without sash bars), edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc complete all as specified and directed in SSR Part I Section 8 clause 8.24 (a).

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F aluminium anodised body and tounge door stopper with hard drawn steel spring, 140mm size fixed to door all as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for precast cement concrete solid building blocks or slabs as in masonry, 10cm thick, type C1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M & L for cement concrete 1:3:6, type C1 as in kerb or mud stop, rounded or chamfered on edges complete all as directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in base of flooring, etc and finished the surface fair to receive top layer screed bed complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 8 to 10mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed ceramic, coloured tiles, Grade B III, 7 to 8 mm thick area of each tiles not exc 0.06 sqm as in skirting including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Mild steel framed work such as grills, gratings, door, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F Rolled mild steel work as in posts etc using Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc including cutting, welding complete. Steel section conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S & F Rolled mild steel work as in trusses, purlins, rafter etc using Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc including cutting, welding complete. Steel section conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (Total coated thickness) of any colour, finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with best quality self tapping screws as specified

M & L for granite stone slab (of any type) 20 to 25mm thick, machine cut, as in cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:4 & cutting, polishing complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, dirt etc and brushing neat cement slurry with 3 kg of cement per sqm on floor complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring, self finished, 20 to 25mm thick laid and and jointed in grey neat cement slury and pointed in coloured cement to match with the shade of the stone slab including providing 20mm thick screed bed in CM 1:4 including rubbing, polishing complete all as directed.

M&L for machine cut kota stone slab as in skirting/dado/vertical surfaces, self finished, 18 to 20mm thick laid and and jointed in grey neat cement slury and pointed in coloured cement to match with the shade of the stone slab including providing 10mm thick screed bed in CM 1:3 including rubbing, polishing complete all as directed.

M&L for machine cut cudappah stone slab as in flooring, 20 to 25mm thick laid and and jointed in grey neat cement slury and pointed in coloured cement to match with the shade of the stone slab including providing 20mm thick screed bed in CM 1:4 including rubbing, polishing complete all as directed.

M & L for roundings to edges of stone slabs, one edge, as in steps, cooking platform and other similar situation complete all as directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:4, on surfaces other than fair faces of brick work or on one side lathing finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation old decorated/treated surfaces of wall by complete removal of existing treatment by wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying two coats of white wash complete all as specified and directed

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of old or previously treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L for Preparation of old external surfaces of walls, facias, cornices etc by complete removing existing treatment and appyling two coats of weather proof antifungal paint of approved shade (Apex-Ultima of ASIAN PAINTS) over one coat of primer all as per manufacturer instruction and as directed by Eng-in-charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good with cement mortar, cutting exc 10 cm but n.exc 20 cm girth complete all as specified and directed.

Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repair 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including PVC connection pipe of 15mm dia, 450mm long, brackets complete all as specified and directed. Make CERA Cat No B1010109 or equivelent of PRAYAG/HINDWARE/Parryware

S&F Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, providing Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 600 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. Make of WHB CERA Cat No S2010105 or equivelent of PRAYAG/HINDWARE/PARRYWARE

S&F in repair plate rack made of stainless steel fixed to wall, size 900mmX 750mm X 250mm (36x31x10 ench) Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond

S&F in reapair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190 gms) complete all as specified and directed.

S&F Shelf 18 inch long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed. Make Prayag Cat No 191 or equivelent as approved by GE

S & F low density polythyene pipe 40mm , pressure rating 6Kgf/sqcm, fixed to wall/ceiling or laid in floor etc including fittings complete all as directed. Make Prayag or equivelent as approved by GE

S & F low density polythyene(LDPE) pipe 32mm , pressure rating 6Kgf/sqcm, fixed to wall/ceiling or laid in floor etc including fittings complete all as directed. Make Prayag or equivelent as approved by GE

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmx203mm bowl size 405mm x 354mmx203mm (Make: Prayag Cat No 1239D or equivelent of Parryware /Hindware/Cera)

S & F 15 mm bore, bib taps, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore, stop/angle valves, fancy type with flange and shank, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 110 mm dia UPVC (SWR) pipes, Type 'B', single socketed,in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with solvent cement joints fixed to wall, using MS holder bat etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S&F PVC (SWR) branch piece (single Y) 75 mm dia equal or unequal with access door complete all as specified and directed.

S & F in repair 75 mm dia outlet , PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M & L for Point wiring surface type, with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC conduit with all fittings and accessories (like Tee, bend etc.) complete in walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point and earth dolly including PVC terminal box with 3mm thick masonic laminated sheet top cover fixed on wall with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed.

S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Ceiling rose, 3 phase/PVC/polycarbonate (bearing ISI marked), isolated body including providing PVC square/round block complete all as specified and directed.

Cutting hole/opening through stone masonry wall of 38 cm thick suitable for providing 300mm sweep exhaust fan and making good the disturbed surfaces using cement mortar 1:4 or PCC 1:2:4, type B1 as required including toothing and bonding, finished the surfaces to match with existing ie white/colour wash as required complete all as directed.

Supply and Fixing exhaust fan, 300mm sweep, AC single phase 230/240 Volt including louver cut to fit with hole for exhaust fan complete all as directed.

Harish Constructions

HRML CONSTRUCTIONS