14/15THFC/DEWANHAT/2025-2026

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone) including removing, spreading and

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment

Single brick flat soling of Picked Jhama Bricks including ramming and dressing the bed to Proper level and filling joints with powderes earth or local sand.

Cement Concrete with 30mm down graded Shingles excluding shuttering (1:3:6) in foundation : For Pump House.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and

Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to 1st floor)

BASIN

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).

Priming one coat on steel or other metal surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.( i) Up to 4th floor b) Two coats - Lum Sum ( Details in bill )

Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drainetc

Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colourin oxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) Wall

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of allay

[PWD Schedule Page- 99, Item- 1]

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.

(ii) 100 mm dia. boring etc. top enlargement

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.

(ii) 100 mm dia PIPE

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.

Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 50 mm X 100 mm.

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. Note: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water.

Collecting sample of water for bacteriological and chemical test from any

Supplying P.V.C. water storage tank of approved quality with closed top

Labour for hoisting plastic water storage tank from ground level to the roof of second floor. Up to 1500 litre

Digging earth in any soil including mixed soil but excluding moorum, laterite sand stone or any other hard stone includingspreading or stacking the spoils within a lead of 75 metres asdirected bailing out water upto 1 metre depth, shoring etc.,when and if required and back filling with fine sand (including cost of sand) on completion of steining works. A) R.C.C. Ring Well i) 1.2 metre diameter of digging for 0.9 metre internal diameter of well ring. a) Upto 3 metre below G.L.

R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per direction. a) 65 mm thick and 0.9 metre internal dia.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length. (a) 75 MM Dia

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992

Supplying, fitting and fixing alloy iron with brass spindle stop cock/ bib cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut.

Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.

Supplying,fitting and fixing threated End cap

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (A) For Exposed Work (ii) CPVC Pipes Class-2,SDR-13.5 (a) 25 mm dia.

Supplying fixing commissioning and testing Solar Voltaic Module 335 WP 24 V on existing iron frame structure each 2008 x 1002 x 35 mm Monocrystalline Silicon Solar cells laminated between sheet of Ethyline Vinyl Acilate (EVA) and high transmissivity 3 mm tempered glass. Confirming to IEC 61215 (Revised) specifications or equivalent National of International Standards. The power output of the module under STC should be a minimum of 335 W. The operating voltage corresponding to the power output mentioned above should be at least 57.0 Volts. The terminal box IP 65 Protection level on the module should have a provision for opening for replacing module.( Brand- Finolex/Amrut/ Waaree) ( With Warranty card )

Supplying,Fitting ,Fixing & Installation of Iron Filter (Vessel) with back wash system including Filter Media Size -13”X56” Brand -Pentair / Tata / Filtro ( with one Year Warranty card )

Supply and fixing round 2-core 4 sq-mm PVC multi core FR wire for array connecting.

Supply and fixing MC4 connector for panel loop.

[Earthing with 50 mm (2”) dia G.I. pipe 3.64 mm thick x 3 mts. Long and 1 x 4 SWG G.I. Wire (4 mts. Long) 13mm dia. X 80 mm long G.I. pipe protection (1 mtr. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mts. Below the ground level & restoring the surface duly rammed. For soft soil.

Connecting the all equipment to earth busbar including GI (Hot Dip) wire of size as below on wall floor……………… as required and making connection to equipment with bolts, nuts, washers cable lugs as required and mending good damages No. 4 SWG.

Providing and fixing conductor made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supply, installation testing & lowering of 1.0 HP oil filled Solar submersible three phase pump motor set complete having suitable discharge as per yield test of well. Submersible cable of 30 mtr 3-core 2.5 sq-mm cable with MOC bar chart and necessary control panel and starter as per manufacturer specification. Brand - Kirloskar/ CRI ( With one year warranty Card )

Supplying, fittng and fixing 1HP Solar PV Pump Cntroller EB.

ADD GST @ 18%

ADD LABOUR WELFARE CESS @ 1%