SPECIAL REPAIRS TO PART PERIMETER FENCING AT DEPOT, JCO CLUB AND TRG AREA LOCATION AT COD DEHU ROAD.

Amount

Dismantling posts of struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground (Natural ground/concrete, brick work) full length of post to be measured complete all as specified and directed by Engineer-in-Charge

Dismantling of chain link fencing wire mesh or any type including barbed wire fencing, folding servicable fencing for reuse complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for barbed wire fencing all as specified and as directed.

Excavation in post holes (or similar hole) each n. exc. 0.5 cum, getting out, returning filling and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm watering and removing surplus soil to a distance n. exc. 50cm and making good surface in soft and loose soil complete all as specified and directed by Engineer-in-Charge

M & L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and directed by Engineer-in-Charge

S & F for angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size.for doors, balusters, nosing to steps including embeding in concrete and screwing etc.complete all as specified and directed by Engineer-in-Charge

S & F for MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 5 to 10mm dia of shank etc complete all as specified and directed by Engineer-in-Charge

S & F for flat iron straps to chain link fencing including drilling bolting or riveting etc complete all as specified and directed by Engineer-in-Charge

Supply only chain link MS galvanised fencing incl line wire 100x100mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and directed by Engineer-in-Charge

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips etc.complete all as specified and directed by Engineer-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc.Getting out and getting out in soft/ loose soil all as specified and as cdirected.

M&L Cement concrete 1:4:8 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and as directed by Engr-in-charge.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete.

M & L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging including use & waste of formwork for fair finished surfaces complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L for preparation of surfaces of new plastered surface of wall and applying two coat of cement base paint over wet surface complete all as specified and directed.

M & L for two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge

M & L for two coats of synthetic enamel paint to old steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth after necessary preparation of old surfaces complete all as specified and directed by Engineer-in-Charge

M & L for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth complete all as specified and directed by Engineer-in-Charge

S & F GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. including taking down existing barbed wire wherever exist(Each line of wire to be measured.) complete all as specified and directed by Engineer-in-Charge

Providing and fixing in repairs concertina coil fencing with razor wire blade type 600 mm dia 10 m openable length ( total length 90m) having 50 nos round per 6 m length upto 3 m height of wall with existing angle iron Y shape placed 3.0 m apart and tied with GI staple and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of E-in-c complete all as specified

S and F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed

Dinesh Constructions (BID ID -3265220)

S Y Itkar Construction and Company (BID ID -3274909)

H S TAKHI (BID ID -3276744)

M/S OMKAR DEEPAK DHAVAN (BID ID -3277838)