SPECIAL REPAIRS TO BLDG NO P-1 OFFR MD ACCN AT ENTITY B 61 WEU IN THE AREA OF AGE B R III UNDER GE NORTH DELHI CANTT 10

Amount

Demolition of existing water proofing treatment of any description and in any position to expose the top surface of RCC slab including cleaning the surfaces with wire brush complete all as specified and directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as spcified and directed.

M &L for plain cement concrete Type B-0 (1:2:4) 12.5mm graded aggregate in roof kerbs of mud stops, rounded or chamfered on edges complete all as spcified and directed.

Supply and fix the APP polymeric water proofing membrane of minimum 3mm thickness & weighing not less than 3.6.kg/sqm of Make : 'MOPLY FP' manufactured by M/S STP Taxsa Ltd or HYPER PLAS (Poleyster) manufactured by M/S IWL ltd or SHALIPLAS (Poleyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or MAKPOLYPLAST manufactued by M/s MK Petro Ltd or TORCH TAR AS APPROVED BY GE, black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over 1.5 Kg/sqm bitumen grade 85/25 over compatible bitumen primer at the rate of 0.40 kg/sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the ends and sealing applying a coat of cold emulsion bituminous primer all as per manufacturers instructions, including taking down existing roof treatment of any description and any thickness and cement mortar screed over and including 15mm thick CM 1:4 plastering over a tack coat of cement slurry using WPC liqued as per manufacturing instruction and applying two coat of silver shield bituminus paint over APP, complete all as specified and directed.

Material and labour for chipping off spoiled and loose concrete from soffits and sides of beam, slab, chajjas and parapet etc clean the surface as directed and apply one layers of guniting using mechanical pressure machine over and including steel wire mesh 2mm dia 75x75 mm aparture of wire layers n.exc average thickness fixed with tinned tacks/galvanised wire staples/ screws , average thickness of gunite layers n exc 25 mm in Cement concrete 1:1.5:3 using 12.5 mm stone aggregate and finishing with 10 mm thick plastering in CM (1:3) including necessary form work if required at any height from GL and removing off rubbish etc complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as directed and specified.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 all as directed and specified.

Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick all as directed and specified.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement. It should be laid in alternate bays, each bay n.exc 3m length with joint to be filled with bituminous mastic filling comprising a mixture of Part of heated hot blown bitumen 85/25 penetration and two parts of heated sand all as specifed and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement and no pigment, set, jointed and pointed neat cement slurry, laid over and including 20 mm thick screed bed in CM 1:6 all as specified and directed.

M & L Granite stone slab, black, 20 mm thick machine cut polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite stone with and including screed bed of 15 mm thick in cement mortar 1:4 all as directed and specified.

M&L for Vetrified Ceramic tiles 10 mm thick dark shade (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match over and including screed bed 15mm thick in cement mortar 1:6 all as directed and specified

M&L for Vetrified Ceramic tiles 10 mm thick dark shade in skirting (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match over and including plaster 10mm thick in cement mortar 1:4 all as directed and specified

M&L non skid coloured ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry, pointed in coloured cement to match the colour of tiles over and including screed bed 15mm thick in cement mortar 1:6 all as directed and specified

M&L for glazed ceramic coloured tiles of size 350x250x7-8/450x350x7-8mm size in vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified

Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water etc all as directed and specified.

M&L for rendering 15mm thick on other than fair faces of brick work surfaces in cement mortar 1:6, Finish the surface even and smooth without using extra cement all as specified and directed.

M&L for preparation of new plastered surfaces any description and apply two coats of oil based paint over a coat of primer over 3mm wall care putty on plastered surface area all as specified and directed. .

M&L for rendering 15mm thick on fair of faces of brick work surfaces in cement mortar 1:4, Finish the surface even and smooth without using extra cement all as specified and directed.

M&L for preparation of new plastered surfaces any description and apply two coats of cement base paint over a coat of alkali resistant primer on plastered surface area all as specified and directed. .

M&L preparation of newly plastered ceiling surfaces of any description and apply three coats of white wash all as directed and specified.

M&L preparation of old plastered ceiling surfaces of any description and apply two coats of white wash all as directed and specified.

Preparing plastered or unplastered old decorated surfaces of walls complete removal of exiting treatment and applying two coats of oil bound distemper over 3mm thick wall care putty all as specified .

Preparing plastered or unplastered old decorated surfaces of walls complete removal of exiting treatment and applying two coats of cement based paint all as specified .

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as directed and specified.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed and specified..

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint all as directed and specified.

Material and labour for preparation of old steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat complete all as directed and specified..

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) not exceeding 1.5 sqm and remove from site as directed and specified.

All as per item No 30 here-in-before but exceeding 1.5. sqm but n.exc 4 sqm each and -ditto- complete

Cutting holes in brick walls built in cement mortar exceeding half brick but n.exc one brick for inserting hold fasts or similar work and madegood the dismantles portion in cement concrete 1:2:4 type B-1 as directed and specified.

S & F 35 mm thick flush shutter solid core construction with block board core and plywood face panels, commerical type and both sides. Complete all as directed and sepcified..

Supply and fix for 35 mm thick plain, framed, panelled door shutters (any numberer of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc, the size of members as specified in SSR , Part I section 8, clause No 8.24 (a) and as directed

S&F box type mild steel windows gauzed/ glazed incl frame made of hollow sections 60 x 25 x 1.25 mm thick 50 x 20 mm x 1.25 mm thick MS Hallow pipes as in windows shutter with sash bars incl 150 mm size MS tower bolts 2 No each leaf, MS handle made of Z section 100 mm long 2 Nos each leaf, mild steel cleat 55 mm x 25 mm x 75 mm long 2 Nos each leaf, MS Pintel hing 75 mm long 14 mm dia 02 Nos each leaf complete all as specified and directed of make : M/s Tee Pee Industries, Amritsar, M/s Metal Window Corp New delhi/ M/s Chandini Industries, Ghaziabad.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mmcomplete all as specified and directed

S&F mild steel work of any section as in framed window guard bars/grills as directed and specified

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane as directed and specified

Supply and fix Galvanised mild steel wire cloth of 0.56 mm nominal dia of wire, average width of apparature 1.18mm & fixed with tinned tacks or galvanised wire staples as diected and specified.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixedas diected and specified.

Supply and fix Mild steel medium weigh butt hinges 100mm size and fixed as directed and specified.

S & F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed as diected and specified..

Supply and fix Aluminium handles, cast type, anodised size of handle 150mm as diected and specified.

S&F Stain less steel kitchen sink 1.00 mm thick for kitchen with plug, waste pipe washer including cantilever bracket connecting union etc over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm as diected and specified.

Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified..

All as per item No 47 here-in-before but 20mm bore and -ditto- complete as diected and specified.

Supply and fix galvanised steel water tubes medium grade 15mm dia with fittings, fixed to walls ceilings and laid in floor etc complete all as directed and specified.

All as per item No 49 here-in-before but 20mm bore and -ditto-complete as diected and specified.

Refixing 15mm dia old tubing and connection in new of old position (wall, ceiling floor etc) including making good dismantled cortion as per existing finish or surfaces as diected and specified..

All as per item No.51 here-in-before but 20mm bore and --ditto--- complete as diected and specified..

Supply & Fix rotational moulded polythene water storage tanks, 500 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including dismantling existing water tanks all directed and specified.

S & F 20mm bore PTMT high pressure rate float valve with aluminium rod and ball complete as directed and specified.

S & F in repair vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 440mm, white with integral foot rest including connectoin to ‘P’ or ‘S’ trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor and concrete bedding etc complete all as directed and specified. (Make -Hindware/cera)

S & F in repair PVC valvesless, syphoni action type, finishing cistern 10 Ltrs capacity, low level, white, with inlet, ball valve float and handle including brackets.

S & F in repair bib taps cast copper alloy fancy type C.P 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified.

S & F in repair concealed stop valve cast copper alloy fancy type C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S & F in repair for 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as diected and specified.

All as per item No.59 but 20mm dia as diected and specified.

Supply and fix PVC connections 15mm bore with PTMT nuts with washers of length 600 mm as diected and specified..

Supply & Fix grating square 150mm size of PTMT all as directed and specified

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed

S&F 2nd class hard wood plain fillets square, rectangular wrought secured with nails to existing chowkhats or wall sectional area exc 13 Sqcm and n exc 25 sqcm as diected and specified.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides 25mm thick one side one face is covered with decorative face veneer with lipping/frame to match in cup board all as directed and specified

S&F mild steel bright finish or electrogalvanised continuous piano hinges width of flap 40 mm as diected and specified..

S&F magnatic catcher to hold the cup board shutters as diected and specified.

M & L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

S&F 100 mm aluminium anodised Hasp and staple including bolt to hinge plate and fixed to screws as diected and specified..

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor as diected and specified..

S&F drappery rods fancy type size, and pattern as approved 20 mm dia with gold colour knobs at both ends including sliding system and arrangment for sheer curtain complete all as directed (Make -Mac/Vista

S & F in repair vitreous china wash hand basin of size 550mm x 450mm, incl fixing to wall with brackets etc complete all as directed and specified. (Make -Hindware/cera)

S&F in repair wall mounted stainless steel Plate Rack III tier in kitchen size 36 inch x 24 inch x 10-12 inch and fixed to wall as diected and specified.

S & F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F 15 mm dia bore shower rose of PTMT any colour with arm 195 mm long, with with bend of 45 degree with flange of PTMT of required colour, in cl screw with iron pipe as diected and specified.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) as diected and specified.

M & L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete as diected and specified.

S & F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete as diected and specified.

Supply only Integral water proofing compound complete all as spcified and directed.

Taking down copper/aluminium point wiring (light, fan,buzzer, socket or power & AC Points) complete, including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. and making good disturbed surfaces all as Specified and directed by Engr-in-Charge

Taking down unserviceable main switches, DBs including MCBs, bus bars chambers etc from wall / existing main boards and removing from site complete all as Specified and directed by Engr-in-Charge

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including sheet metal concealed boxes,cover plate, joint boxes etc complete for the following ,make :- Finolex/plaza/polycab/L&T/Anchor/RR Kabel

One light point controlled by one switch

One fan/Exhaust point controlled by one switch

One socket outlet 6 Amps point controlled by one switch on same board

One socket outlet 6 amps point controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per item No.3 here in before but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 Amps on independent board.

All as per item No.3 here in before but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor (colour green) fixed to dolly.

6 Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box of 1.60mm thick suitable for modular/conventionalswitches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including making good disturbed surfaces to match the existing complete all as specified and directed for the followings :- Make of wire & PVC Conduit-Finolex/Plaza/Polycab/anchor/L&T.

One light point controlled by one, one way switch 06 Amps.

One fan/Exhaust fan point controlled by one, one way switch 06 Amps.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per serial item No 91 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per item No.91 here in before but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor (colour green) fixed to dolly.

S & F modular switch 6 Amps, one way, one module 240 volts,50 Hz all as specified and directed. Make- Anchor Roma/Legrand/Schneider/GE/L&T

S & F modular socket, 3 pin 6 Amps,240 volts,50 Hz combined 2 module all as specified and directed. Make- Anchor Roma/Legrand/Schneider

S & F modular switch 16 A, 1 module,240 volts, 50 Hz all as specified and directed. Make- Anchor Roma/Legrand/Schneider

S & F modular socket 6/16 A, 5 pin, 2 module, 240 volts, 50 Hz all as specified and directed. Make- Anchor Roma/Legrand/Schneider

S & F modular Bell push 6 Amps, one module 240 volts,50 Hz all as specified and directed. Make- Anchor Roma/Legrand/Schneider

S & F Fan step regulator, rotary type, 120 W, modular humfree AC 230 volts, 2 module duly ISI marked . Make- Anchor Roma/Legrand/Schneider

Supply and fixing bell, AC, 230 volts, single pole, ding dong type on and including 03 mm thick plastic laminated sheet cover of suitable size with brass screws and washers etc complete all as specified & directed. Make- Anchor/Cona/SSK

S & F Sheet metal enclosure DB 12 way ,Single pole and neutral with 200 Amps rated bus bar,230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface. Make Legrand/ L&T/Hager/Havells

S&F MCB, DP, 63 Amp,240 Volts, AC of breaking capacity 10 KA, C curve of sizes. Make Legrand/Havells L&T/Hager

S&F MCB SP 240 Volts AC 6 to 40 Amps of breaking capacity 10 KA C curve. Make : Legrand/ Havells / L&T/Hager

19 S & F LED wall light fitting 10/12 W, 230 volts attracting wall/ceiling mounted type with white reflector, suitable for mirror fittings ,water proof , stainless steel housing complete with all accessories prewired and including connecting up with twin core flexible copper conductor cable with suitable size. Make:OSRAM/POLYCAB/Philips/ Precktus/mufasa/Radiant.

2 S&F as in replacement LED 10 Watts 230 volts, AC bulk head luminaries of polycarbonate housing & enclosed with acrylic diffuser IP-65 protection incl connecting up with twin core flexible copper conductor cable complete as specified and directed by Engr-in-charge. Make:OSRAM/Philips/Havells/GE

Supply and fixing ultra slim wall mounted batten luminaire with extruded aluminium power coated housing with polycarbonate diffuser & integrated electronic driver 18/20 watt,6500K, 230 volt AC including connection with twin core fiexible copper conductor, Make:OSRAM/Philips/Havells/GE

S&F LED Bed side reading stainless steel wall light fitting 3/5 Watts, 230 volt, AC, rectangular/round , flexible neck/Gooreneck. cool day light complete with all accessories and incl connecting up with twin core flexible copper conductor cable all as specified and directed by Engr-in-charge. Make:Citra/Renata/Absales/Glity/Marical/Winomo/Ledmomo/AST.

S&F in repir of fresh air ventilating Fan 230/250 mm sweep, 230V,AC steel body with louver shutter etc complete incl connecting up with three core flexible copper conductor cable ,from ceiling rose to fan and cutting chising of existing hole as required size and making good disturbed surface all as specified and directed.Make- ORIENT/USHA/Havells/Crompton/GE

Supply and fixing wall mounted bracket decorative luminaire powder coatet housing with milky glass suitable for GLS, B-22 Lamp.:MAKE-Havells (Ord code - LHJC02108499) or equivalent in OSRAM/Philips/GE

S & F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps.

S &F round LED wall light with powder coated CRCA housing and PS diffuser ,6500 K,14 watt ,230 volt AC complete .Make- philips /wipro/GE .

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 15700.00

friends associeates