PROPOSED 30 MTR HEIGHT FLAG MAST AT GOVERNMENT MEDICAL COLLEGE IN DISTRICT SAHARANPUR UP

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. All kind of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

M-150 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). DSR-6.1.1

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) M-20. (Foundation)

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab above 0.50 sqm)

Providing edge moulding to 18 mm thick marble stone counters, vanilities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer- in charge. Granite work .

S/O Hand rail and bulustade modular system passive SS- 304 grade decorative railing systerm comprising of hand rail 50 mm and 1.5 mm thick and 3 no horizonatal steel pipe of 19 mm dia and 1.5 mm thick @1200 mm c/c of passivated ss 304 Grade and fix duly on the floor with specially design rivet expension bolt and finish the surface food and covering with steel shoes with all visible stenless steel metel of 304 grade in satin finish hight of railing is 900 as per detail specificaton.

Supply & fixing of 30 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld complete in all respect.