Day to Day maintenance of various Govt residential Quarters under Construction

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

French spirit polishing, Two or more coats on new works including a coat of wood filler

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. (one or more coats on old work)

Painting with ready mined Synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (old Steel work) one or more coats.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.6.1 All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including shuttering and carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including carriage and shuttering

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)including carriage all complete job

Supplying and fixing C.I. cover 450x450 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 11.51.1 In colour such as White, Ivory, Grey, Fume Red Brown

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.at councillor hostel block C and D 32 mm dia

25 mm dia

Providing and laying of Heat tape on PPR pipe Den force make or equivalent

Providing and Laying Insulation Work on PPR by way of Using K-Flex with Taping in inner wall 25 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Insulation to water storage tank of 1000 ltr capacity by way of using 25 mm Thick Nitrile Tube Glass wool chicken mesh ,polythene and Aluminium sheet complete job.at councillor hostel block C and D

Providing and fixing of Superior Quality of PPR fixtures 25mm PPR Elbow

25 mm PPR FT elbow

25 mm FT Tee

25mm PPR plain Tee

Cross over PPR

250mm PPR socket

half set PVC 90 mm

half set PVC 110 mm

PVC Socket 110mm

110 mm PVC Door Tee

90 mm PVC Door Tee

40 mm dia Ball Valve

32mm dia Ball Valve

32 mm PPR Elbow

40 mm TEE PPR

40MM ppr UNION

40MM ppr elbow

40MM ppr socket

32 MM Tank Nipple PPR

32 mm ppr Tee

Reducer 40x32 mm PPR

25mmx15 mm PPR FT socket

32 mm dia Ball valve

32 mm dia PPR socket

Tank Nipple GI 25 mm

PPR 25 mm FT elbow

PPR FT Tee 25 mm

FT Socket 1.15" 40 mm PPR

25 mm ball Valve

25 mm PPR Union

CP Jalli

End plug

PVC Waste Pipe

32 mm PPR Tee

32 mm ppr union

32mmx25mm reducer socket

32mmx25mm reducer Tee

40mm x32mm Reducer TEE

MT socket 1"x32 mm

PPR FT socket 32 mmx1"

PVC pipe bend

Tank nipple 1.15"

Providing and fixing of PVC pipe of 6 kg of Superior Quality with all complete job 110 mm

90mm tee

Providing and Fixing of PVC connection of superior Quality 90mm tee

110 mm Plain Bend

90 mm Plain bend

110 mm Socket

Flow Trap

110 mm PVC Elbow

Providing and fixing of following fixtures sanitary of approved make 2 in 1 wall Mixer F1012401

Head Shower F701011055

Shower Arm F7040106

Angle valve F1012201

Bib Cock F1012151

PVC connection F8070403

Toilet Paper holder 5001109

CP nipple 2" F8070305

Soap Case F5001106

Towel Rail F5001105

Fastner wash basin mixer

Pedestal S2090107

Providing and fixing of Wash basin with all complete jobWash basin S2040122

Waste Coupling F8050102

PVC cistern B1010102

X-Nipple

Waste Pipe w/c

Hooke

Binding wire

Mirrior

CP Cap

Providing & fixing White vitreous china water closet squatting pan(western type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm at councillor hostel block C and D

Providing and fixing of seat cover for water closet squatting pan of standard size of make cera or equivalent.

Providing & fixing White vitreous china water closet squatting pan(western type) along with “S” or “P” trap including of single piece set of cera make or equivalent.

Sink Mixer

Hel foeset

Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin- charge. 15.45.1 Including excavation and refilling trenches after taking out the pipes. 15.45.1.1 Upto 150 mm diameter.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15.44.1 15 mm to 40 mm nominal bore.

Supply and installation of electric motor of 1.0 HP as required of make USHA ,crompton /Hawells or equivalent including wiring all complete job.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and Laying aluminium sheet over k-flex with ,polythene with taping ,wire mesh,and rock wool all necessary fittings with all complete job.for dia 6" and 1'-0" wherever required.

Supply and installation of electric Gyser of having 25 ltrs of make Racold/Jaquar/Hair of approved make with all complete job.

Providing and fixing of fastener for gyser

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Providing and fixing of NRV for motor

Supply of solid blocks of size 1'x6"x6" of cement concrete

Engagement of labour and plumber for sludge removal from septic and 3 Nos chamber including draining of CI pipe with necessary replacement of chmaber cap all complete job as directed by Engineer in charge.

Engagement of Carpenter for necessary fittings of existing doors and windows

Engagement of labour for overall cleanliness of all quarters and removal of malba/debris and loading also

Engagement of 407 for carrying of malba/debris from site to source at councillor hostel block C and D

Providing and laying of Action Tesa flooring ESSENZA PLUS+ of size 193mmx1214mmx80mm Antiviro with necessary thermocal with all complete job with necessary corner beading as required as directed by the engineer in charge. at councillor hostel block C and D

Engagement of 407 for carrying of malba/debris from site to source

Providing and laying of Action Tesa flooring ESSENZA PLUS+ of size 193mmx1214mmx80mm Antiviro with necessary thermocal with all complete job with necessary corner beading as required as directed by the engineer in charge.

Providing and fixing Alimunium work for doors ,windows ventilators and partition with extruded builtup standard tubular sections/appropriate etc all complete as per architectural drawing and the direction of Engineer In charge .Anodised aluminium (anodised transparent of or dyed to required shade according to IS 1868 aluminium anodised coating of grade AC IS)

For shutters of door,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoperene required (fitting shall be paid separetly power coated aluminium (minimum thickness of power coated 50 micron

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm)

Providing and fixing of american handle with SS screw etc complete as per the direction of engineer incharge

Providing and fixing of american handle with SS screw etc complete as per the direction of engineer incharge

providing and fixing of Brass lock with all necessary screw as per the direction of engineer in charge

G CHANNEL

Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete

Providing and fixing 12mm thick plaster of Paris (gypsum anhydrous) ceiling tiles upto a height of 5 Metres above floor level over wooden frames and rendered smooth with plaster of Paris (frame work to be paid separately).

Providing and fixing 19mm thick particle board

Providing and fixing 6mm thick particle board

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.250x10 mm

Providing and fixing 12mm thick plaster of Paris (gypsum anhydrous) ceiling tiles upto a height of 5 Metres above floor level over wooden frames and rendered smooth with plaster of Paris (frame work to be paid separately).

Dumping stone including cost of stones in Horizontal level

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2

Insulation to water storage tank of 500 ltr capacity by way of using 25 mm Thick Nitrile Tube Glass wool chicken mesh ,polythene and Aluminium sheet complete job.

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Carriage of materials by mechanical transport including loading ,unloading stacking etc complete job Cement an avg lead 03 KM

Sand an avg. lead 15 kms

Stone agg. an avg lead of 15 kms

M/S ABDUL ALI