SPECIAL REPAIRS TO BLDG NO T- 82 (BCD) AT PATIALA HILL AND T- 111(BCD) AT JAT HILL AT CHAKABAMA MILITARY STATION

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering. Complete all as specified and as directed.

S&F galvanized, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L-type of J-typer or cranked hook bolts and washers, in roofs, etc with grade of zinc coating 275 Complete all as specified and as directed.

S&F 0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zince coating 275, Complete all as specified and as directed.

S&F 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) complete with grade of zince coating 275. fixed with nail ,Complete all as specified and as directed.

Refixing galvanized, corrugated mild steel sheeting of any thickness with two corrugations side lap, fixed with L-type of J-typer or cranked hook bolts and washers, in roofs, etc Complete all as specified and as directed.

Refixing of plain galvanised, mild steel sheeting of any thickness, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), Complete all as specified and as directed.

Refixing of plain galvanised, mild steel sheeting of any thickness, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) etc and fixed with nail Complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer over washing with mordant solution & including preparing ,washing & cleaning to new zinc or galvanised surface. Complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position Complete all as specified and as directed.

M&L for clean sawn 2nd class hard-wood in scantling timber fixed. Complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described and treated with two coats of creosote oil. Complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles Complete all as specified and as directed.

M&L for old size brick work with sub class 'B' old size built in Cement Mortar (1 : 6), straight or curved on plan exc 6m mean radius on plan . Complete all as specified and as directed.

M&L for old size brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in Cement Mortar (1 :4), Complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar (1 : 4) mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement (WPC paid in seprate item supply only), Complete all as specified and as directed.

Supply only water proofing compound ISI Marked, Complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar (1 : 6) and finishing even and smooth without using extra cement. Complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of primer with alkali resistant to newly plastered surface including preparation of surface. Complete all as specified and as directed.

M&L for two coats of distemper oil emulsion over one coat of chalk whiting on newly plastered surface including preparation of the surface. Complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

M&L for PCC (1:3:6) type C1, 75 mm thick ( by using 20mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement. complete all as specified and as directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and as directed.

M&L PCC 25mm thick type B-0, (1 : 2 : 4) (12.5mm graded stone aggregate) as in sub-base to receive floor finishes, complete all as specified and as directed.

M&L non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes, complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing coat) removing serviceable tiles to store and removal of rubbish out side MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

M&Lfor glazed ceramic coloured tiles in vertical surface 300x 200x 7mm set and jointed in neat cement slurry over and including plastering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) to receive wall finishes.

M&L for PCC 1 : 3 : 6 type C1, 50mm thick (by using 20mm graded stone aggregate) as in sub-base to receive floor finishes of path. complete all as specified and as directed.

M&L for chequered cement concrete tile 20CM x 20CM x 19 to 20 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes, complete all as specified and as directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for.(Roof Kerbs) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

M&L for Cement concrete (1 : 3 : 6) type C2, as in surface channels and drains (using 40mm graded stone aggregate) complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squar tube and fixing in opening as per specification complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and as directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each, complete all as specified and as directed.

S&F Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples. complete all as specified and as directed.

S&F plain fillets bullnosed, splayed chamfered or rounded on one edgee or face wrought, secured with nails of 2nd class hardwood exc 3cm and n exc 6 sqcm sectional area. complete all as specified and as directed.

M&L 100mm size Butt hinges med weight cold rolled mild steel and fixed . complete all as specified and as directed.

M&L 75mm size Butt hinges med weight cold rolled mild steel and fixed, complete all as specified and as directed.

M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed. complete all as specified and as directed.

S&F150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised. complete all as specified and as directed.

Dismantling boarding,any description, fixed in any position with nails. complete all as specified and as directed.

M&L for second class HW weathering boarding, wrought both sides and edges shot and chamfered ( on exposed edges) , thickness 20mm to 25mm and rebated on thick edge to give 20mm laps complete all as specified and as directed.

M&L for including preparation and treating two coats of synthetic enamel paint over a coat of pink primer to new wood and wooden surface exceeding 10cm width or girth, complete all as specified and as directed.

M&L for two coat of synthetic enamel paint to old steel surface including preparation, complete all as specified and as directed.

M&L for writing letters & figures ( Building Nos) (Block, Roman, Italic or Indian) not exc 30cm high complete all as specified and as directed.

Demolition of reinforcement cement concrete (unreinforced) of any description and any position not otherwise specifically provided for. complete all as specified and as directed.

M&L for precast RCC (1 : 2 : 4) type B1 (using 20mm graded stone aggregate) in cover slab and set in CM 1 : 4 including necessary form work complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding witgh and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips. complete all as specified and as directed.

Taking up or down carefully steel water tubing, 15mm bore of pipe and connections including cleaning for refixing complete all as specified & directed

Taking up or down carefully steel water tubing, 20 mm bore of pipe and connections including cleaning for refixing complete all as specified & directed

Supply, Laying and testing GI tubing of size 15mm bore 'medium grade' (ISI marked) with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

Supply, Laying and testing GI tubing of size 20mm bore 'medium grade' (ISI marked) with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

S&F in repairs Wash Basins,Vitreous China,white ,flat back,size 630 x 450mm including brackets and cutting for and pinning in ends of brackets or erecting stand inclduing pillar tap cast copper alloy chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed .but exclusive of fixing of supply and waste pipe. complete all as specified and directed

S&F glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs, complete all as specified and directed

S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repairs, complete all as specified and directed

S&F in repairs vitreous china squatting pan ,'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete (excluding fixing bolts,flushing cistern and flush pipe) including provision of lime concrete bedding white, complete all as specified and directed

M&L for PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs. complete all as specified and directed

S&F in repairs in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement. complete all as specified and directed

S&F brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs, complete all as specified and directed

S&F stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs. complete all as specified and directed

M&L for WC connector 110 mm PVC SWR for WC, complete all as specified and directed

M&Lfor PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia of outlet. complete all as specified and directed

S&F bib tap brass 15mm bore dia chromium plated long shank fancy type with capstan heads , screwed down, screwed for iron pipes complete in repairs. complete all as specified and directed

S&F PVC connection 450mm long, complete all as specified and directed

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store. complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position in SSR Part-I . complete all as specified and directed

S&F 20mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed

S&F15mm dia bore stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixe, complete all as specified and directed

Demolition and breaking up drain pipe salt glazed or AC or reinforced concrete and set in cement mortar 150mm dia, complete all as specified and directed

S&F 110 mm dia PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches. complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed

S&F 75mm dia PVC pipe (SWR) single socketed in any length with rubber ring joint, fixed in walls, complete all as specified and directed

S&F stack clamp out of 50mm by 5mm flat iron and 16mm dia round ion stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipe. complete all as specified and directed

S&F PVC (SWR) Junction Single 'T' equal or unequal 110mm dia complete all as specified and directed

S&F PVC reducer (SWR) 110mm dia, complete all as specified and directed

S&F PVC (SWR) bends with access door of radius 110mm dia, complete all as specified and directed

S&F PVC (SWR) bends with access door of radius 75mm dia, complete all as specified and directed

M&L concrete bed to drain pipe in cement concrete 1 : 4 : 8 type D-2, for 110mm dia pipe including packing under and haunching against the side of pipe after they are laid and tested in. complete all as specified and directed

Excavation in trenches not exceeding 1.50 m wide and 1.50 m depth in hard / dense soil soil, complete all as specified and directed

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in soil, complete all as specified and directed

Taking down carefully point wiring copper/aluminum (light, fan, socket complete) including unserviceable battens or from existing conceal conduit including earth continuity wire and fittings such as switches, socket, ceiling roses,lamp holder etc and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed

M&L for point wiring with single core PVC insulated unsheathed multistranded copper conductor FRLS cable of size 1.5 Sqmm nominal area 1100 volt grade drawn through and including PVC casing-capping/conduit of suitable size with all fittings and accessories including PVC board with cover of suitable size for housing/mounting the switches/socket etc including 1.5 Sqmm PVC insulated unsheathed single core copper conductor as earth continuty wire connected to common earth dolly for one light/exhaust fan bell point control by one switch.one way complete all as specified and directed.

All as per item no 2 above but for 15 amp socket by using 2.5 sqmm copper cable with 2.5sqmm copper conductor as earth continuity.

All as per item No 2 above but for 3 pin, 5 Amp Socket on the same board.

All as per item No 2 above but for 3 pin,5 Amp Socket on independent board

S&F switch piano flush button single pole one way 5 Amp. complete all as specified and directed

S&F switch piano flush button single pole one way 15 amp. complete all as specified and directed

S& F socket outlet flush type 5 pin 5 amp multipurpose ,230 volts single pole one way suitable for 3 pin /2 pin 5 amp plug to complete all as specified and directed

S& F socket outlet flush type 5 pin 5 amp multipurpose ,230 volts single pole one way suitable for 3 pin /2 pin 15 amp plug to complete all as specified and directed

S & F LED bulk head luminaires 10 LED 6000k comprising of high brightness LEDs, IP54 protecxtion environmental friendly ultra modern energy saving, surface mounted, decorative round plastic compleate all as directed. Make-Havells /Bajaj/Crompton

S&F ceiling rose surface back light 65 x 25mm, two to three terminal. complete all as specified and directed

M&L for Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Lumino LED lamps 10W W E27W Ball lamp lumen output 1020 Im 3000K color temp current 0.055 amps complete as directed . Make - Havells ordering code LHLDEBHEMD8X010 or eqvt make of philips, bajaj

S&F MAXOLED batten with Maxo LED tybe 20W LED 6000K T8 LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient, 230V. 50Hz complete incl taking down old one all as specified and directed. Make-Havells Tube : make philips/ Bajaj/ Crompton.

Taking down old unserviceable DB/Main switchs incl MCBs wooden block of any size and type and removing complete all as specified and directed

S&F PVC rectangular block of size 250x200x50mm depth complete all as specified and directed

S&F sheet metal enclosure for DB when MCB to be used 8 way 200 amp rated bus bar, SPN 240V, double door complete all as specified and directed..

S&F MCB Single pole and neutral 240 Volts, 20 to 32. Amps,c-series, complete all as specified and directed Make -havells, cat No.DHMGCSNF006-032

S&F MCB Single pole 240 Volts 5 to 32 Amps,c-series, complete all as specified and directed Make -havells, cat No DHMGCSPF006-032

Dismantling/taking down old burnt out u/s UG cable/sub main wiring of any size complete from locations where directed. complete all as specified and directed

S&F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor surved with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or rouind or 16 sq mm cable. complete all as specified and directed

Dismantling house service brackets, any type, complete all as specified and directed

S&F House service bracket (Hook type) compleate with 3.0 meter long GI pipe 40 mm dia Med grade, two Nos 90 degree bends, MS hooks and stay or guy and complete all as specified and directed

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00mm dia by means of nuts, bolts, check nuts & washers made of galvanized iron or steel and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cmx30cmx10cm with one handle for lifting made out of 8mm dia MS bar, watering pipe 20mm bore galvanized iron pipe (medium grade) with MS funnel for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 3 of MES Sch Pt-I including taking down the existing,complete all as specified and directed

Shri B K Ukil

Shri Atoshe Tuccu