Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹44.0 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹53.9 L+₹7.3 L (15.7%)Rejected-AOC | 2 | Rejected-AOC OTHER THAN L1 BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
31 Jan 2020, 6:00 pmClosed
GE SATWARI
GE SATWARI
REPAIR/MAINTENANCE TO STEAM BOILER ,MECHANICAL LAUNDRY,DG SET,STP,INCINERATOR AND REPAIR/REPLACEMENT OF WATER SUPPLY PIPE LINE UNDER GE SATWARI
2019_MES_305954_2
GEJM-72/19-20
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE SATWARI
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
GE SATWARI
₹90,000
Yes
1 May 2020
24 Jan 2020
3 Feb 2020
24 Jan 2020
31 Jan 2020
25 Jan 2020
Amount
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables,pipe line,pole etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge.
Returning filling in, trenches including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified.
Removing excavated surplus materials to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point. Note for item No 1 to 3 :- During the excavation any damage to the existing services like telephone cable,electric cable, sewage line etc will be repaired by the contractor at his own risk & cost. No extra payment will be born by the dept. on this account.
Material and Labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone agregate for suporting of CI/GI/MS pipes, header etc all as per specified and directed.
Taking out unservicable GI tubing 20 /25/40/50 mm bore. tubing with all fitting from the excavated trenches/over ground/with wall as directed by Engr-in-Charge
Taking out unservicable GI/CI/DI tubing 80 /100/150/200 mm bore tubing with all fitting from the excavated trenches/over ground/with wall as directed by Engr-in charge
Laying only CI/DI Pipe recived from as per srl item 4 here in before but for size 150 mm bore pipe. (Exc earth work will be measured & paid separetely)
Supplying,laying,jointing & testing in replacement of galvanised steel tubing 15 mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc laid in trenches complete all as specified and directed
Description all as per Srl item No 8 here in before but for 20mm bore pipe.
Description all as per Srl item No 8 here in before but for 25mm bore pipe.
Description all as per Srl item No 8 here in before but for 40mm bore pipe.
Description all as per Srl item No 8 here in before but for 50mm bore pipe.
Description all as per Srl item No 8 here in before but for 80mm bore pipe.
Description all as per Srl item No 8 here in before but for 100mm bore pipe.
Description all as per Srl item No 8 here in before but for 150mm bore pipe.
Supply, Fixing & Laying in trenches, jointing and testing in replacement of Ductile Iron pipe with socket & spigot end including, specials Class K-9 complete 200 mm dia all as specified and directed. Note : CI fittings, excavation & earth work are excluded from the scope of this item and shall be measured and paid for separately.
Supply, Fixing & Laying in trenches, jointing and testing in replacement of Ductile Iron pipe with socket & spigot end including, specials Class K-9 complete 150 mm dia all as specified and directed. Note : CI fittings, excavation & earth work are excluded from the scope of this item and shall be measured and paid for separately.
Supply, Fixing & Laying in trenches, jointing and testing in replacement of Ductile Iron pipe with socket & spigot end including, specials Class K-7 complete 100 mm dia all as specified and directed. Note : CI fittings, excavation & earth work are excluded from the scope of this item and shall be measured and paid for separately.
Supply and laying pipe ductile iron S/S with tyton joint class "K-7", 150mm (6") dia complete all as specified and directed.
Supply and laying MS Pipes ERW Steel including specials, nominal dia 150 mm as per IS 3589 (1981) thickness 6.0mm. complete all as specified and directed. Make- Jindal Pipes /TATA
Supply and laying MS Pipes ERW Steel including specials, nominal dia 300mm as per IS 3589 (1981) thickness 6.0mm. complete all as specified and directed. Make- Jindal Pipes /TATA
Supply and fixing in replacement cast iron body sluice valve heavy duty class PN 1.6 flanged ends any pattern with head wheel & brass spindle ISI marked conforming to IS-14846 of 2000 for 80mm bore pipe with jointing material ,flanged joint,rubber gasket 6mm thick, nuts & bolts, washer 10mm thick, including dismantling old one, all complete all as specified and directed. Make:- Kirloskar/Leader/L&T
Description all as per Srl item No 22 here in before but 100mm bore pipe
Description all as per Srl item No 22 here in before but 150mm bore pipe
Description all as per Srl item No 22 here in before but 200 mm bore pipe
Supply and fixng Cast iron Non return valve 1.6 PN (NRV) 150 mm bore complete conforming to IS 1969 double flanged and drilled including bolts, nuts, washers, gasket etc complete and dismantling of old one complete all as specified and directed. make : Kirloskar/Leader/ L&T.
All as per Ser item No 26 here in before size 100 mm bore
Supply and fixing gun metal globe or gate valves with iron wheel head,screwed both ends for iron pipe of 15mm bore including taking out existing unserviceable gate valve.
Description all as per Srl item No 28 here in before but 20 mm bore pipe
Description all as per Srl item No 28 here in before but 25 mm bore pipe
Description all as per Srl item No 28 here in before but 40 mm bore pipe
Description all as per Srl item No 28 here in before but 50 mm bore pipe
Disconnecting the electrical connection for taking out unserviceable / BER equipment like DG set,Servo Voltage stablizer, LT panel Chloronation Plant etc, shifted from installation to MES store yard as directed by Engr-in Charge The cost of transportation is deemed to be included in the quoted rate.
M & L for Burning out old leaking lead joints in position and removing old lead for 80mm bore CI pipe/ fittings and keeping aside for further disposal (earth work shall be measured and paid separately).
Description all as per Srl item No 34 here in before but for 100mm bore pipe.
Description all as per Srl item No 34 here in before but for 150mm bore pipe.
Description all as per Srl item No 34 here in before but for 200 mm bore pipe.
Material and labour for run lead joint including all jointing material such as lead, spun yarn etc for 80mm bore cast iron spigot & socketed pipe & fittings. (Exc earth work will be measured & paid for separetely.
All as per item No 38 here in before but for 100mm bore
All as per item No 38 here in before but for 150mm bore
All as per item No 38 here in before but for 200 mm bore
Supply and fix in replacement GI union ISI marked of 15 mm bore all as specified and directed.
Supply and fix in replacement GI union ISI marked of 20 mm bore all as specified and directed.
Supply and fix in replacement GI union ISI marked of 25 mm bore all as specified and directed.
Supply and fix in replacement GI union ISI marked of 40 mm bore all as specified and directed.
Supply and fix in replacement GI union ISI marked of 50 mm bore all as specified and directed.
Supply and fix in replacement GI elbow ISI marked of 15 mm bore all as specified and directed.
Supply and fix in replacement GI elbow ISI marked of 20 mm bore all as specified and directed.
Supply and fix in replacement GI elbow ISI marked of 25 mm bore all as specified and directed.
Supply and fix in replacement GI elbow ISI marked of 40 mm bore all as specified and directed.
Supply and fix in replacement GI elbow ISI marked of 50 mm bore all as specified and directed.
Supply and fix in replacement GI nipple ISI marked of 15 mm bore all as specified and directed.
Supply and fix in replacement GI nipple ISI marked of 20 mm bore all as specified and directed.
Supply and fix in replacement GI nipple ISI marked of 25 mm bore all as specified and directed.
Supply and fix in replacement GI nipple ISI marked of 40 mm bore all as specified and directed.
Supply and fix in replacement GI nipple ISI marked of 50 mm bore all as specified and directed.
Supply and fix in replacement GI socket ISI marked of 15 mm bore all as specified and directed.
Supply and fix in replacement GI socket ISI marked of 20 mm bore all as specified and directed.
Supply and fix in replacement GI socket ISI marked of 25 mm bore all as specified and directed.
Supply and fix in replacement GI socket ISI marked of 40 mm bore all as specified and directed.
Supply and fix in replacement GI socket ISI marked of 50 mm bore all as specified and directed.
Supply only Altoc GP ( Calcium based Granular disinfactant for water treatment) in plastic drum packing 45 KG all as specified and directed.
M&L for tyton joint for DI pipe line including all jointing material of size 100mm bore complete all as specified and directed.
M&L for tyton joint for DI pipe line including all jointing material of size 150mm bore complete all as specified and directed.
S&F Multi-cavity water sanitizer/Conditioning station with proportional dosing arrangement at Zero discharge, Power Free Automatic syatem, with 100 ltr Tank covered with Lid and over flow valve, inlet/outlet and drain valve all as specified and directed. Make :Delibac or equivalent
S&F Plastic Cylindrical sealed disposable sanitizer Refill for disinfection of drinking water with arrangement for controlled release suitable for operation in pressurized line all as specified and directed. Make :Delibac or equivalent.
Material and labour for cutting MS plate in round shape of same size and thickness of MS pipe of 300mm bore and closed both ends by means of welding complete all as specified and directed by Engr-in-Charge.
Material and labour for cutting MS pipe of size 150mm bore and joint with 300 mm bore pipe for taking out branch connection by means of welding complete all as specified and directed by Engr-in-Charge.
Drilling and tapping (15mm to 25mm dia) in existing 150mm/100mm/80mm bore GI/CI pipe line for taking branch connections including providing brass ferule (15mm to 25mm dia) & required fitting (excavation and earth work will be measured & paid for separetly) complete all as specified and directed.
Cutting of existing cast iron pipe line of 150/200 mm bore in position for inserting of CI Special such as tees,bend,coller,tail piece etc for fixing of sluice valves/for branch connection etc. Note:- Exc & earth work,CI Special & sluice valves of size & lead joint shall be measured and paid separately under respective item of shedule
Material and labour for distmentaling broken valve pit chamber & construction of brick masonary valve pit built in cement mortar 1:6 of size 120cm x 120cm x 90 cm (internal dimension) over 15cm thick PCC 1:3:6 type C-2 sub base extended alround 15cm beyond external edge of brick work including plastering 15mm thick in cement mortar 1:4 internally and plus pointing to brick wall surfaces externally as work proceeds complete with MS sheet cover 3.15 mm thick with handle and locking arrangement, angle iron frame 40mm x 40mm x 6mm (grouting with anchor fashioners length not less than 15cm - 04 Nos) and painting with a coat of synthatic enamel paint over a coat of red oxide, complete all as specified and directed.
Material and labour for opening of top cover of sluice valve any size and replacement of Gland packing of sluice valve including nut bolt washer of existing size complete all as specified and directed.
Supply and fixing in replacement of high torque motorized valve with gears and adopters self lubricating type,Weather proof with protection against,Over voltage jamming of valve and over current protection with manual by pass arrangement to Open/Close the valve on power failure.Including taking down complete mechnical work , flanged end, jointing material, rubber gaskets, nut-bolts and piping for valve fitting. Valve size : 150 mm Indirection of Engineer in charge.
All as per Srl No 73 here in before but of size 100 mm bore
S & F 1100 volts grade heavy duty cable PVC insulated copper conductor Single core of size 25 Sqmm complete as directed by Engr-in-Charge
Supply and fixing in replacement of Delivery Line Open/Close indication lamp with existing make and size complete all as directed by Engr-in-Charge -
Supply and fixing in replacement of Over Head Tank full /Empty Indication with existing make and size complete all as directed by Engr-in-Charge
Supply and fixing in replacement of Manual/Auto operation of delivery line motorize valve Toggle switch with existing make and size complete all as directed by Engr-in-Charge
Supply and fixing in replacement of Ultra Sonic non contact sensors of existing make and size complete all as directed by Engr-in-Charge
Supply and fixing in replacement Rubber gasket of flanged joint 3 mm thick with 4/6 hole for flanged joint 80 mm dia complete all as specified and directed.
Supply and fixing in replacement Rubber gasket of flanged joint 3 mm thick for flanged joint 100 mm dia complete all as specified and directed.
Supply and fixing in replacement Rubber gasket of flanged joint 3 mm thick for flanged joint 150 mm dia complete all as specified and directed.
Supply and fixing in replacement of Aviation obstruction light LED type comprising of aluminium housing with polycarbonate enclosure with 300 no's LED's including macking all electrical connection and as directed by Engr-in-Charge : Make: C&S Cat part No LTAL100.
Supply & fixing in replacement of PVC insulated aluminium wire 1100 Volt of size 6 x2 core fixing of wall along with OHT or as directed by Engr-in-Charge
Supply and fixing in replacement of on load change over switch panel mounted of 200 A as per existing make and size complete all as directed by Engr-in-Charge
Material and labour in replacement of Cast iron fitting for CI spigot socketed/ flanged pipe bend (any type radius and angle) tapers any type (straight, bends increasing, decreasing or double socket etc) tee pieces, single branch 'Y' junction double branch cross (all socket or socket spigot or flanged) collars, cap and plugs upto 200 mm bore connection pieces one end flanged and other socket or spigot and bell mouth piece one end flanged and other end tapering as bell mouth complete all as specified and directed.
Supply and fix Rubber mat of size 1MtrX2MtrX10mm (ISI Marked) as approved by GE, complete all as specified.
M & L for welding the existing leakage GI Pipe line any size by using electric welding machine & welding electrode .Note :Earth work shall be measured and paid separately under respective item of shedule
Supply and fix chemical dosing system suitable to inject solution up to 25 LPH comprising dosing pump coupled with three phase electric motor of Cap 0.5 HP,1440 RPM assembly with agitator, dosing and agitator in single motor ,agitator withSS sweep blade duly FRP Coated. Frp tank 150 ltr Cap complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete .Note All Electrical and water connection is deemed to be quoted rate.Make Sathya Sai
Supply and fixing in replacement PVC insulated and PVC sheathed flat submersible cable 35 sqmm 3 core with stranded copper conductor 1100 volts grade suitable for submersible motors and pumps and making electric connections all as specified and directed. Make Polycab/Finolex/Havell,s
Supply and fix in replacement of digital type water leval monitering indicator with 5 stage along with a siren system AC /DC driven complete all as directed by Engr-In-Charge
Supplying & Fixing on wall/ laying in ground 6 pair x 1.5 Sqmm copper conductor, PVC insulated & Sheathed, armored cable with heavy duty PVC Saddles 60 cm apart complete all as specified and directed by Engineer-in-charge. Make:-Grandlay/RR Kabel/finolex/polycab/KEI/L&T
M&L for painting of the pipe line any size in pump house building in side or outside along with overhead tank by removing old paint ,cleaning the surface removing all dust and oil from the surfaces with two coat of synthetic enamel paint with spray paint as per existing color and writing the direction & supplying area in capital letters as directed by Engineer-in-charge.
Material and labour for taking out the old unserviceable motor vertical turbine cap 40 HP from the foundation, dismantling the motor, carrying the motor to workshop for removing the burnt winding wire of the motor, cleaning the slots for rewinding, and rewinding the motor with super enamelled copper winding wire superior quality as per exisitng gauge and size, varnishing, drying, replacement of bearings - 2 No and assembling the motor, fixing on site and testing the same all as specified and directed. Note: The cost of transportation to and from the workshop is deemed to be included in the quoted rate.
Supply and fix in replacement of boiler tubes (Coil) made with hot rolled seamless carbon and alloys (nickel) of steam boiler (Non-IBR type) of cap 600 Kg/Hr having reverse fuel technology all as specified and directed.
M&L for replacement of lower ducting of steam Boiler cap 600 Kg/Hr all as specified and directed.
M&L for replacement of upper ducting of steam Boiler cap 600 Kg/Hr all as specified and directed.
Supply and fix in replacement of metalic Non-return valve of size 25 mm of steam boiler all as specified and directed.
Supply and fix in repair of steam boiler control panel board by replacement of its accessories like: safty switches, control cable, fire alarm, steam pressure switch, Digital temperature Display, lit switches with high quality lamps, atmospheric economiser, burner safty valve, sensor complete all as specified and directed.
Supply and fix in replacement of Eonomiser for the steam boiler cap 600 Kgs/Hr by taking out the defective by opening the Nuts, bolts & Washers and fixing fixing new one in existing position suitable for thermax make Steam Boiler complete all as specified and directed.
M&L for repair of Washing Machine of cap 60 kgs front opening by repair/replacement of fwg items like 3" motor pulley, 16" motor pulley, Bearing-22210, Bearing slip-22310, Bearing-22215, Bearing slip-22315, Glen dori, door gaskit, Oil seal, belt and inner basket complete all as directed.
M&L for repair of hydro 25kgs capacity by replacement of fwg items like Rubber Buffer, Hydro spring, Hydro Bolt set SS, Limit switch, Push botton with NC, 0-15 Min timer, brake plate, 1 KVA transformer, delay off timer, SS Lock all as specified and directed.
Supply and fix in repair Sequence controller (LMO24) of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in repair Ignition Transformer (FIDA) of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in repair Ignition Electrode of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in repair Ignition Cable of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in repair Photocell (SEIMENS) of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in repair Fuel Pump of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in repair Thermocouple (1 to 1200 Deg) Inconel of Burner for Oil fired incinerator complete all as specified and directed.
Supply and fix in replacement of Sealed lead acid battery of capacity 12V 7Ah for lift (15 person) and control panel of fire fighting complete all as specified and directed.
Supply and fix in replacement of solar Li-ion battery 14.8V/5.2 AH with BMS system (solar street light) complete all as specified and directed.
Supply and fix in replacement of rotational moulded polyethyline water tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 2000 Ltrs complete incl necessary plumbing wk all as specified and directed.
Supply and fix in replacement of elevator cabin fan of passenger lift (15 person) AC 230 Volt five blade Model: GF-300A, 53W, 1300 RPM of air flow 1100 m3/H of 40 db complete all as specified and directed.
Supply & fix in replacement mono block pumping set of cap 0.5 HP AC 230 V along with PVC connection pipe of 20 mm dia 10 Mtr long all as specified and directed.
M&L for repair of UPS of capacity 10-20 KVA by repair/ replacement of insulated gate bipolar transistor (IGBT), DC capacitor, SCR module, logic board, diaod transisters, protection board or DC converter circuit board 3 phase of suitable rating complete all as specified and directed.
M&L for repair of UPS of capacity 2-5 KVA by repair/ replacement of insulated gate bipolar transistor (IGBT), DC capacitor, SCR module, logic board, diaod transisters, protection board or DC converter circuit board 3 phase of suitable rating complete all as specified and directed.
Material and labour for pressure testing of cylinder and refilling of fire extinguisher CO2 type of capacity 6.5 Kgs alongwith replacement of nozzle and hose as existing all as specified.
Material and labour for pressure testing of cylinder and refilling of fire extinguisher CO2 type of capacity 4.5 Kgs alongwith replacement of nozzle and hose as existing all as specified.
Material and labour for pressure testing of cylinder and refilling of fire extinguisher CO2 type of capacity 9 Kgs alongwith replacement of nozzle and hose as existing all as specified.
Material and labour for pressure testing of cylinder and refilling of fire extinguisher ABC type of capacity 5 Kgs alongwith replacement of nozzle and hose as existing all as specified.
Supply & fix in replacement of pressure release valve of size 25 mm dia as existing all as specified.
Supply and fix in replacement Air termination, single pointed rod 12 mm dia and 300 mm long in existing GI pipe of 20-25 mm dia all as specified and directed.
Supply and fix in replacement test point terminal block made of gun metal or phasphorus bronze size 75X75X25 mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hex. head screw all as specified and directed.
Supply and fix in replacement Aluminium strip 25 X 3.15 mm with saddles and fixing screws etc for roof conductors above ground all as specified and directed.
M&L for PCC block of size 30 x 30 x 30 cm type B-1, 1:2:4 (20 mm graded aggregate) with and including embedded 25 mm dia GI pipe medium grade 1.00 mtr long for fixing air termination including all necessary fixing arrangement all as directed.
Supply & fix in replacement of control console of Public Address system comprising microphones, 250 watt amplifier, loudspeakers, including testing and commisioning with existing setup upto 07 zone and 08 subzone each zone complete all as specified and directed.
Supply & fix in replacement of wall mounted speakers 6 Watt complete all as specified and directed.
Supply & fix in replacement of air compressor of Motor capacity: 5 HP Crompton motor, with auto cut, Motor type: three phase AC 415 Volts, No of cylinder: 02, Tank: 280 Ltrs, CFM: 30.2, Pressure: 500 Pound Make: Speed Air/Xsoni complete all as specified and directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25mtr depth and top edge of the earth plate not less than 1.5mtr below normal ground level connected to galvanised iron strip 25 X 6 mm by means of nuts,bolts & washer etc. Earth strip connected upto main earth point/DBs alongwith 40 mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 ( using 20 mm graded stone agregate) and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of ms bar @ 15 mm CIC with both way lifting arrangement complete including all necessary excavation & earth work all as specified and directed
M&L for replacement of hydrant valve single headed all as specified & directed.
BMMJ TRADERS AND ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .